ERGON LOGITECH LTD - ΚΑRATASOU 6ΑSINDOS - PC 57400 - GREECE T +30 2314 070108 / https://www.ergonlogitech.com / e-mail:ergonlogitech@gmail.com
We recommend the use of safety gloves when performing this task. The construction and operation of each piece of equipment is strictly tested at the factory. Confirm that the
features match the order specifications. We remind you that our constant search for technological improvements means that, changes to the equipment described in this
manual may be carried out without prior notice.
•Remove the shipping box.
•Inspect the unit carefully, report any damage immediately.
•Do not operate if there is visible or suspicious damage.
•Carefully inspect all packing materials to prevent loss of components, parts or start-up guide.
•Carefully remove the device from the shipping box.
•The ultraviolet lamp is installed.
•Plug the power into the wall outlet and the unit will automatically turn on.
With the remote control device you can control the device remotely.
1.8 Web APP WiFi Connection (options)
The switch (10) activates a 433 MHz RF receiver. The internal remote control switch allows users to
remotely activate or deactivate connected devices via the EWeLink application from anywhere in the
world.
The wireless device switch transmits data to a cloud platform via the WiFi router, which allows users to
remotely control all connected devices via the eWeLink APP.
Sonoff RF's cloud server is the Amazon AWS global server, with capabilities to set schedules for the
devices, which can include countdown, scheduled on/off, and therefore can help customers maintain an
easy and seamless usage.
The iOS version of the app can be downloaded on the AppStore, while the Android version can be
downloaded on Google Play.
1.9 Downloading the app WiFi
2.1 Launch WiFi connection
After switching on, the device will enter the quick
pairing (Touch) mode in first usemode. The device
will close the Quick Pairing (Touch) mode if the
Wi-Fi connection is not successful within 3
minutes.
If you want to enter this mode, press and hold the
manual button for about 5 seconds until the Wi-Fi
LED changes to a cycle of two short and one long
flash and release.
Press "+" for operation following the message in the app
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm between the radiator of the
appliance and your body. This transmitter should not be located or operated in conjunction with any other
antenna or transmitter.
Shenzhen Sonoff Technologies Co.,Ltd.
Declares that the BASICR2/RFR2 type radio equipment complies with Directive 2014153/EU.
TX frequency:WiFi: 2412-2472 MHz / RX frequency:WiFi: 2412-2472 MHz / SRD: 433.92 MHz (RFR2).
2.2 Safety instructions on maintenance
To carry out maintenance, we recommend the use of protective equipment such as gloves.
Always disconnect the power plug from the power outlet before performing any maintenance or connection.
Technical maintenance and other operations should only be carried out by authorised technicians, using genuine spare parts. The manufacturer accepts no liability arising
from incorrect use of the product or failure to comply with the instructions contained in this manual.
2.3 Equipment maintenance table
Recommended cleaning schedule
Once a year and depending on the quality of the
incoming water we treated.
Replacement period
Only if damaged.
Once the life cycle of 9,000 hours of operation is
completed.
