Blueant SENSE Bedienungsanleitung
SENSE: USER GUIDE
Read Me to Get the Most Out of Your Device...
• ENGLISH
• FRANÇAIS
• ESPAÑOL
ENGLISH
3
BlueAnt SENSE
Touch-Sensitive
Volume Controls
Battery
Indicator
On/Off Switch
Charge Port Microphone
Multi-Function
Button (the
BlueAnt
symbol)
Speaker
4
1: Charge Your SENSE
Before using your SENSE, charge it using the supplied USB cable and charger:
> A full charge takes about 2.5 - 3 hours.
> During charging, the battery
indicator light turns red.
> When the light goes out, the
charge is complete.
Tip: You can also charge the SENSE
by connecting to your computer’s
USB port.
Battery
Indicator Light
ENGLISH
5
2: Pair the SENSE with your Phone
1. Slide the power switch to the ON position.
2. The SENSE will announce the available languages. Tap
the
BlueAnt
symbol when you hear your language.
3. The SENSE will now talk you through the pairing
process.
4. The pairing code is 0000 (four zeros). Note: your BlueAnt
SENSE will appear in the Bluetooth menu on your phone as the “BlueAnt S3”.
If you select the wrong language: turn off your SENSE without completing the pairing.
When you switch it back on your SENSE will ask you to select the language again. If this
does not work, reset your SENSE and start again (see “Reset the SENSE” on page 17).
If the SENSE does not go into pairing mode: hold down the
BlueAnt
symbol for about 6
seconds.
Slide the switch to power on
then follow the prompts
6
3: Transfer your Phonebook
Once the pairing is complete your SENSE will attempt to transfer the contacts from your
phonebook so that it can announce the names of incoming callers. On most phones this
happens automatically.
If your phone asks you to allow a connection to the “BlueAnt S3”, you must select “YES”
or “OK”.
BlackBerry®
If you are using a BlackBerry smartphone you may see
a message like this one.
Select “Don’t ask this again” so that a tick appears
in the box, and then choose “YES”.
Accept connection request
from BlueAnt S3?
YES
NO
Don’t ask this again
ENGLISH
7
Android™
On some Android devices a message about the phonebook
transfer appears at the top of the screen.
You must swipe your fi nger over this message and accept the
phonebook transfer request.
Automatic Transfer Not Supported
Some phones do not support automatic phonebook
transfers. If this is the case for your phone the SENSE will
announce that it cannot transfer the contacts automatically.
See “Manually Transferring your Phonebook Contacts” on page 14 for help.
Note: some phones do not support phonebook transfers at all. If this is the case, the
SENSE will read out the caller’s number instead.
Phonebook Access Request
Notifi cation
shown on
Android
devices
8
4: Install the SENSE in your Car
Don’t forget: Drive safely and within the law.
Please refer to the relevant national or local legislation
regarding the usage of mobile devices while driving. Remember
that driving is your fi rst priority: please read the enclosed
safety information booklet for tips on the safe use of your
BlueAnt device.
1Slide the clip
onto the back of
the SENSE until
it clicks into place.
Slide the SENSE onto your car sun visor.
2
ENGLISH
9
Answering Calls
When the phone rings, the SENSE will announce the caller’s name or number and ask you
if you want to take the call. Wait for the prompt to fi nish, and then say Answer or Ignore:
1Call from
John Smith,
answer or
ignore?
Answer
2
Or: tap the
BlueAnt
symbol at any time to answer the call. Double tap to ignore.
Tip: Tap the
BlueAnt
symbol to hang up and end the call.
10
Making Calls
If your phone supports voice dialing over Bluetooth you can make calls using your voice:
1. Tap the
BlueAnt
symbol.
2. The SENSE activates your phone’s voice dialing functionality. Please refer to your
phone’s manual for details on the commands you can use to control your phone.
Tip: Tap the
BlueAnt
symbol to hang up and end the call.
Note: Your phone must support voice dialing over Bluetooth:
> The Apple iPhone 3GS (running fi rmware 3.1 or higher) and iPhone 4 support this
feature, but older iPhone models do not.
> Most Android phones running Android version 2.2 or above support this feature.
> Most BlackBerry smartphones support this feature.
Andere Handbücher für SENSE
1
Inhaltsverzeichnis
Sprachen:
Andere Blueant Telefon Handbücher
Blueant
Blueant COMMUTE Bedienungsanleitung
Blueant
Blueant S3 Compact Bedienungsanleitung
Blueant
Blueant S4 Bedienungsanleitung
Blueant
Blueant SENSE Bedienungsanleitung
Blueant
Blueant S3 Compact Bedienungsanleitung
Blueant
Blueant COMMUTE 2 Bedienungsanleitung
Blueant
Blueant Supertooth Light Bedienungsanleitung
