BlueParrott Point Bedienungsanleitung

VXi BlueParrott®

PointTM

User Guide

VXi BlueParrott®PointTM User Guide PAGE 2

TABLE OF CONTENTS

Safety Information .............................................3

Package Contents..............................................4

Glossary of Terms ..............................................5

Headset Overview..............................................6

Charging the Headset ........................................7

• Battery Power Indicators

• Operation While Using the Charger/Adapter

Getting Started ..................................................9

• On/Off/Standby

• Pairing with a Phone

– NFC (One-Touch) Pairing

– Regular Pairing

• Wearing and Adjusting the Point

• Making/Taking Calls

Advanced Features and Functions....................14

• Multiple Device Pairing

• Multipoint Mode

• Additional Features and Functions

– Last Number Redial

– Call Waiting/Rejecting a Call

– Rejecting a Call

– Phone Voice Control (e.g. Siri®or Google NowTM)

– Muting

– Transferring Audio

– Turning Headset Indicator Lights On/Off

• Resetting Headset Paired Devices List

Functions & Indicators Table ............................ 18

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 3

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid

injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices sound

muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s possible for

your ears to adapt to volume that is too high, and this could result in permanent hearing damage without

any noticeable discomfort.

• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.

• Do not immerse any part of this product in water.

• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.

• Use only the power cords included with this product.

• Avoid temperatures exceeding 140° F (will cause equipment failure).

SAFETY INFORMATION

VXi BlueParrott®PointTM User Guide PAGE 4

PACKAGE CONTENTS

1. BlueParrott®PointTM Headset

2. Choice of Ear Buds

(multiple sizes)

3. Choice of Ear Hooks

(multiple sizes)

4. USB Charging Cable

5. Quick-Start Guide*

6. Warranty and Compliance Insert*

*Not pictured.

Images are not shown to scale.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 5

GLOSSARY OF TERMS

• On: Headset is on, but there is no connection to the phone (red light will flash).

• MFB: Abbreviation for “Multifunction Button.”

• Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.

• Paired: Two Bluetooth devices agree to communicate with one another.

• Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call

(blue light will flash).

• Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call

(blue light will flash).

VXi BlueParrott®PointTM User Guide PAGE 6

HEADSET OVERVIEW

A. Volume Up/Mute

B. Volume Down

C. Microphone Boom

D. On/Off Switch

E. Indicator Lights

F. Multifunction Button (MFB)

G. NFC Zone (pictured below)

NFC Zone

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 7

CHARGING THE HEADSET

Connect the USB charger cord into the headset’s

USB charging port. If the headset is not fully

charged, the indicator will turn red. When the

indicator turns blue and stays blue, the unit is

fully charged. A fully discharged battery will

need approximately 1.5 hours to achieve a

complete charge.

Battery Power Indicators

While charging, the indicator light shows

the level of battery power on your Point

as follows:

Blue light: Fully charged. Over 6 hours’

talk time.

Red light: Less than a full charge.

For best performance, keep charging

the headset when not in use.

NFC Zone

Headset Charging Port

Indicator Light Location

VXi BlueParrott®PointTM User Guide PAGE 8

CHARGING THE HEADSET (continued)

Operation While Using the Charger/Adapter

The Point headset should be operated from battery power only. If you connect the headset to a charger

while it is turned on, it will reset and shut off. To turn it back on again, first unplug the headset from the USB

charging cord, slide the switch to the “off” position (if not already done), then back to the “on” position.

NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back

to the phone.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 9

GETTING STARTED

On/Off/Standby

Turn Headset On: Slide the switch down towards the boom to expose a green bar in the switch cavity.

The LED will flash blue three times and you will hear a voice prompt, “Power on.”

Turn Headset Off (conserves battery power): Slide the switch up towards the back of the headset to

expose a red bar in the switch cavity. The LED will flash red four times and you will hear a voice prompt,

“Power off.”

Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the

last device that it was paired with, putting itself into Standby Mode.

Pairing with a Phone

NFC (One-Touch) Pairing

1. Confirm that your cell phone is NFC-capable.

2. Make sure that NFC is enabled on your cell phone.

3. Turn the headset on.

4. Place the NFC zone of your cell phone against the NFC zone

of the headset and hold together while your cell phone

registers the headset.

5. Follow the prompts on your cell phone until it confirms pairing is successful.

Note: NFC and One-Touch Pairing are dependent on your cell phone. The size and sensitivity of your

phone’s NFC zone and how to connect the headset may vary between devices.

NFC Zone

VXi BlueParrott®PointTM User Guide PAGE 10

GETTING STARTED (continued)

Manual Pairing

Placing Headset into Pairing Mode

When you turn the headset on for the first time, or if its pairing memory has been wiped clear, it will go

into pairing mode automatically. If the headset has already been paired with another device, you will need

to manually put it into pairing mode if you are not going to use NFC Pairing.

Power on the headset, then press and hold the MFB for approximately 6 seconds until you hear the audio

prompt “Discovering.” The headset will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone

1. Make sure that other Bluetooth devices are turned off or out of range.

2. Place the headset into pairing mode.

3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.

4. Select “VXi Point” to pair. (Passcode is “0000” if needed.)

5. When connected, the headset will give you the voice prompt, “Your headset is connected” and the

indicator light will flash blue.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 11

GETTING STARTED (continued)

Wearing and Adjusting the Point

The headset is provided with the medium-loop ear bud

already attached. If you need to change it, peel it off

and replace with the ear bud of your choice.

Choose the ear bud and ear hook (if desired) that best

fits your ear.

The headset can be worn on either ear, with or without

the ear hook. The ear hooks are left and right specific

and are marked with an “L” for left or “R” for right to

show which side they are for.

To attach an ear hook, clip the “C” of the hook over the

neck of the receiver.

VXi BlueParrott®PointTM User Guide PAGE 12

GETTING STARTED (continued)

When wearing your Point, adjust the fit by rotating the

ear bud so that the stabilizer loop (if applicable) presses

against the back curve of your ear. Make sure that the

boom is pointing towards the corner of your mouth.

To get the best performance from our noise-canceling

technology, angle the microphone boom towards the

corner of your mouth. Positioning is important; small

adjustments in microphone placement can improve

performance.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 13

GETTING STARTED (continued)

Making/Taking Calls

The headset must be on and connected with your phone.

Making a Call

1. Dial the desired number on your phone. You will hear the call in the headset.

2. To end the call, press the MFB once. The call will end and the headset will enter standby mode.

Answering a Call

1. When you receive a call, you will hear ring tones in the headset. Press the MFB once to answer the call.

2. To end the call, press the MFB once. The call will end and the headset will enter standby mode.

Rejecting an Incoming Call

1. To reject an incoming call, press and hold the MFB for two seconds. You will hear a two-note

descending tone and the call will be transferred to your voicemail (if available).

VXi BlueParrott®PointTM User Guide PAGE 14

ADVANCED FEATURES AND FUNCTIONS

Multiple Device Pairing and Multipoint Mode

The Point has pairing memory for up to 8 devices. The headset can also use Multipoint Mode, which

means that it can be connected to two Bluetooth devices at the same time. You do not have to do

anything to enable Multipoint Mode.

Using the Point in Multipoint Mode

1. To use the headset in Multipoint Mode, first make sure the headset is paired with both your devices.

2. With both devices in range and with their Bluetooth enabled, turn the headset on.

3. As each Bluetooth device connects to the headset, you will hear the voice prompt, “Your headset

is connected.”

The Point will monitor both phones and enable you to answer a call on either one from the headset.

If you are on a call and the other device receives a call, you will hear a notification in the headset.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 15

ADVANCED FEATURES AND FUNCTIONS (continued)

Additional Features and Functions

i. Last Number Redial

To redial the last number that was dialed from the cell phone, press and hold the Volume Down button

for approximately 1 second. A beep will be heard and the phone will redial the last number.

ii. Call Waiting/Rejecting a Call

If you are on an active call and a second call comes in, you will hear a low tone notification in the

headset. If supported by your phone, you have the following options:

• To accept the incoming call and end the active call, press the MFB once to end, and then once

again to answer.

• To accept the incoming call and place the active call on hold, quickly press the MFB twice.

• To reject the incoming call, quickly press both the MFB and Volume Down button simultaneously.

iii. Rejecting a Call

To reject an incoming call when not on another call, press and hold the MFB for 1-2 seconds.

iv. Phone Voice Control (e.g. Siri®or Google NowTM)

Press the MFB once while the headset is in standby mode to initiate voice command functions on your

phone. Support for this is phone dependent. See your phone’s user guide for more information.

VXi BlueParrott®PointTM User Guide PAGE 16

ADVANCED FEATURES AND FUNCTIONS (continued)

v. Muting

The Point can be muted while on a call by pressing and holding the Volume Up button for 1-2 seconds. A

single tone will sound as mute is engaged.

To unmute, press and hold the button again for 1-2 seconds.

While muted, a reminder tone will sound every 10 seconds.

vi. Transferring Audio

To transfer audio from the headset to the cell phone while on a call, press and hold the Volume Down

button for 1-2 seconds. The audio will transfer to the phone. Repeat to transfer audio back to the headset.

When audio is transferred to the phone, the light on the headset will be off until audio is transferred back

to the headset.

vii. Turning Headset Indicator Lights On/Off

A quick press of the Volume Up and Volume Down buttons together will turn the headset indicator lights

off. Repeat to turn the indicator lights on. When powering on the headset, the indicator lights will be in

the same state as they were when last powered off.

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 17

ADVANCED FEATURES AND FUNCTIONS (continued)

Resetting Headset’s Paired Devices List

This will reset or clear the headset’s internal paired devices list. The headset must be on to perform

this function.

1. Power on the headset. It does not matter if it connects to any devices.

2. Hold the headset near your ear and press and hold the Volume Up and the Volume Down buttons

together for approximately 6-10 seconds until two low tones are heard. The LED will flash red two

times, then the headset will automatically go into Pairing Mode.

3. If you are not ready to pair the headset with a device, power it off. The pairing memory is now clear

and will need to be paired to any desired devices before it can be used with them.

VXi BlueParrott®PointTM User Guide PAGE 18

FUNCTIONS & INDICATORS TABLES

Standby Mode Functions

Function Button/Duration

of Press

LED Indicator Audio Indicator Voice Indicator

Power On Slide switch towards

boom

3 fast blue ﬂashes NONE “Power on”

Power Off Slide switch towards

tail

4 fast red ﬂashes NONE “Power off”

Enable Pairing Mode MFB (5-6 seconds) Alternating red and

blue ﬂash

NONE “Discovering”

Volume Up Volume Up

(quick press)

NONE 1 short tone NONE

Volume Down Volume Down

(quick press)

NONE 1 short tone NONE

Phone Voice Control

(Start/End)

MFB (quick press) NONE 1 tone NONE

Last Number Redial Volume Down

(1-2 seconds)

NONE 1 short tone NONE

Disable LEDs Volume Up/Volume

Down (quick press)

NONE 1 short tone NONE

Enable LEDs Volume Up/Volume

Down (quick press)

LEDs active 1 short tone NONE

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

VXi BlueParrott®PointTM User Guide PAGE 19

FUNCTIONS & INDICATORS TABLES (continued)

Standby Mode Functions (continued)

Function Button/Duration

of Press

LED Indicator Audio Indicator Voice Indicator

Reset Paired Devices Volume Up/Volume

Down (5-6 seconds)

2 fast red ﬂashes 2 low tones NONE

Disable Multipoint

Mode

MFB/Volume Up

& Volume Down

(3-4 seconds)

NONE 4 falling tones NONE

Enable Multipoint

Mode

MFB/Volume Up

& Volume Down

(quick press)

NONE 4 rising tones NONE

Establish Service

Level Connection

MFB (quick press) Fast blue ﬂash 1 long tone “Your headset

is connected”

VXi BlueParrott®PointTM User Guide PAGE 20

FUNCTIONS & INDICATORS TABLES (continued)

In-Call Functions

Function Button/Duration

of Press

LED Indicator Audio Indicator Voice Indicator

Volume Up Volume Up

(quick press)

NONE 1 short tone NONE

Volume Down Volume Down

(quick press)

NONE 1 short tone NONE

Mute (On/Off) Volume Up

(1-2 seconds)

NONE 1 tone NONE

Mute Reminder NONE NONE 1 tone (every 10

seconds)

NONE

Answer a Call MFB (quick press) Blue light ﬂashes

slightly slower

2 rising tones NONE

End a Call MFB (quick press) Blue light ﬂashes

slightly faster

2 falling tones NONE

Reject a Call* MFB

(1-2 seconds)

NONE

*Sends call to

voicemail (if

available)

2 falling tones NONE

VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

Inhaltsverzeichnis

Andere BlueParrott Headset Handbücher

BlueParrott

BlueParrott C300-XT Bedienungsanleitung

BlueParrott

BlueParrott B550-XT Bedienungsanleitung

BlueParrott

BlueParrott B350-XT Bedienungsanleitung

BlueParrott

BlueParrott S650-XT Technisches Datenblatt

BlueParrott

BlueParrott B450-XT MS Bedienungsanleitung

BlueParrott

BlueParrott M300-XT Bedienungsanleitung

BlueParrott

BlueParrott B250-XTS Bedienungsanleitung

BlueParrott

BlueParrott C400-XT Bedienungsanleitung

BlueParrott

BlueParrott B250-XT Bedienungsanleitung

BlueParrott

BlueParrott S650-XT Bedienungsanleitung

BlueParrott

BlueParrott B250-XT Bedienungsanleitung

BlueParrott

BlueParrott M300-XT Bedienungsanleitung

BlueParrott

BlueParrott C300-XT MS Technisches Datenblatt

BlueParrott

BlueParrott C300-XT Technisches Datenblatt

BlueParrott

BlueParrott M300-XT SE Bedienungsanleitung

BlueParrott

BlueParrott B550-XT Bedienungsanleitung

BlueParrott

BlueParrott C400-XT Technisches Datenblatt

BlueParrott

BlueParrott S450-XT Bedienungsanleitung

BlueParrott

BlueParrott B450-XT Technisches Datenblatt

BlueParrott

BlueParrott B250-XT Bedienungsanleitung

BlueParrott

BlueParrott B450-XT Bedienungsanleitung

BlueParrott

BlueParrott B650-XT Bedienungsanleitung

BlueParrott

BlueParrott S450-XT Technisches Datenblatt

BlueParrott

BlueParrott B450-XT Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung