Bluestream MX44AB Bedienungsanleitung
MX44AB
User Manual
MX44AB User ManUal
02
contact support@blustream.co.uk / [email protected]
Surge protection device
recommended
This product contains sensitive electri-
cal components that may be damaged
by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of
surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Introduction 03
Features 03
Panel Descriptions 03/04
Remote Control Descriptions 04
Specifications 05
RS-232 Pin Assignment 05
DIP for EDID Setting 05
Application Diagram 06
Package Contents 07
Maintenance 07
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
MX44AB User ManUal
03
contact support@blustream.co.uk / [email protected]
The MX44AB is a 4×4 HDMI Matrix enabling four HDMI sources to
be independently routed to up to four HDTV displays. The MX44AB
also supports 1080p Full HD up to 4K 30Hz plus all 3D formats and
multichannel digital audio formats including Dolby® True HD and
DTS-HD® Master Audio™ pass through. The audio breakout feature
extracts the audio from each of the HDMI outputs and these signals
are outputted through zone specific RCA (S/PDIF) and 3.5mm stereo
L/R analogue outputs. (This feature only works with PCM inputs). The
source specific IR routing feature enables multiple “like” sources to be
controlled discretely by simply routing a specific zone IR input to the
currently selected source IR output. Each source can be routed to any
display using the front-panel push buttons, IR remote control and the
RS-232 interface.
Introduction
Front Panel
• Supports resolutions up to
1080p@60HZ,48-bit deep color,
4k@30HZ
• Allows any source to be displayed on
multiple displays at the same time
• Allows any HDMI display to view any
HDMI source at any time
• Dolby TrueHD and DTS-HD master
audio pass through HDMI output
• Advanced EDID management for
rapid integration of sources and
displays. See below table
• Extract audio from HDMI output via
RCA (S/PDIF) and L/R analogue audio
(From PCM audio on the HDMI feed).
• Multiple switching mode, push-in
button, IR remote control and RS-232
control
• Easy installation with rack-mounting
ears
• Full 3D pass- through.
• HDCP compliant
FEATURES:
2 4 4 4 41 3 3 3 3
1 IR receiver window – Receive the IR from the remote control of MX44AB.
2 Power LED indicator – Indicate the power state of the matrix.
3 HDMI output selection button 1 to 4 – Press to select the desired source input for
the marked output zone 1 to 4.
4 Input LED indicator – Indicates the selected source in the zone output.
MX44AB User ManUal
04
contact support@blustream.co.uk / [email protected]
Rear Panel
MX44AB
21 3 4 4 4 45 5 5 5 6
7 8 9 10
1 IR inputs 1 to 4 – Zone specific
3.5mm stereo phone-jack IR inputs
2 IR outputs 1 to 4 – Source spe-
cific 3.5mm IR jacks which provide
routed IR from the zone IR inputs.
Routing is determined by which
source is selected in a zone.
3 IR extension receiver input –
3.5mm stereo phone-jack enabling
the use of an external IR sensor for
control of the matrix.
4 Coaxial output – RCA (S/PDIF)
output from HDMI output (Zone
specific)
5 L/R output – 3.5mm stereo phone-
jack, audio from HDMI output (Only
supports stereo PCM digital audio
feeds)
6 Power switcher – Press to power
matrix on/o
7 HDMI inputs 1 to 4 – Connect HDMI
sources
8 HDMI outputs 1 to 4 – Output for
displays, AVR etc.
9 RS232 female port – RS232 connec-
tion enabling external third party
setup and control of the matrix.
q Power port – Use included 12V/2A
DC adaptor to power the matrix
switcher.
Remote Control Description
OUTPUT AND INPUT SELECTION
A Selects the zone OUTPUT you wish to
change the source on (Numbers 1 - 4
correspond to the zone outputs 1 - 4)
B Selects the source INPUT you wish to
change on the selected zone
(Numbers 1 - 4 correspond to the
source inputs 1 - 4)
EXAMPLE
To switch source 2 to zone 4 you would
press 4 in the output section (A) followed
by pressing 2 in the Input section (B).
ALL button: The all button selects all the
inputs or outputs in its corresponding box.
Example: (The “All” button in the Output
box selects all the zones so all zones will
change to what source input is selected
next)
PTP: This button will align all the zone
outputs with the like numbered source
inputs. Example: Input 1 to output 1, input
2 to output 2, etc
EDID SET UP
The MX44AB provides a comprehensive
range of EDID settings. Below are three ex-
amples of how to deploy the desired EDID
setting when using the supplied remote.
A. Fix EDID to an INPUT or ALL inpus:
Press the desired video resolution
button (1080I / 1080P / 3D / 4K),
then select the desired audio format
(2.0CH / 5.1CH / 7.1CH), then select
the source input you want this EDID
information allocated to by pressing
the INPUT 1 – 4 or the ALL button
B. Copy EDID of OUTPUT-X to an
INPUT or ALL: Press the COPY but-
ton then select the OUTPUT you wish
to copy the EDID information from,
then select the source input you want
to copy this EDID to by selecting the
INPUT 1-4 or the ALL button.
C. User defined EDID to an INPUT or
ALL inputs: Press USER1 / USER2
button then select the source you
wish to assign this EDID to by select-
ing INPUT 1-4 or the ALL button
NOTE: The button press sequence should
be finished in 5 seconds, otherwise the
operation is discarded.
A
B
EDID
MX44AB User ManUal
05
contact support@blustream.co.uk / [email protected]
Specifications
Video Input Connectors: 4x HDMI Type A,
19-pin, female, locking
Video Output Connectors: 4x HDMI Type A, 19-pin,
female, locking
Audio Output Connectors: 4x RCA (SPDIF), 4xL/R
RS-232 serial port: DB-9, female
IR Input ports: 5x 3.5mm stereo jack
IR Output ports: 4x 3.5mm mono jack
Rack-Mountable: Rack ears included
Dimensions (W x H x D): 428mm x 114mm x 43mm,
without feet
Shipping Weight: 1.0kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature : -4°F to 140°F (-20°C to 60°C)
Power Supply: 12V/2A DC
[DIp]=0000:HDMI1080p@60Hz,Audio2CHPCM
[DIp]=0001:HDMI1080p@60Hz,Audio5.1CHPCM/DTS/DOLBY
[DIp]=0010:HDMI1080p@60Hz,Audio7.1CHPCM/DTS/DOLBY/HD
[DIp]=0011:HDMI1080i@60Hz,Audio2CHPCM
[DIp]=0100:HDMI1080i@60Hz,Audio5.1CHPCM/DTS/DOLBY
[DIp]=0101:HDMI1080i@60Hz,Audio7.1CHPCM/DTS/DOLBY/HD
[DIp]=0110:HDMI1080p@60Hz/3D,Audio2CHPCM
[DIp]=0111:HDMI1080p@60Hz/3D,Audio5.1CHPCM/DTS/DOLBY
[DIp]=1000:HDMI1080p@60Hz/3D,Audio7.1CHPCM/DTS/DOLBY/HD
[DIp]=1001:HDMI4K2K,Audio2CHPCM
[DIp]=1010:HDMI4K2K,Audio5.1CHPCM/DTS/DOLBY
[DIp]=1011:HDMI4K2K,Audio7.1CHPCM/DTS/DOLBY/HD
[DIp]=1100:DVI1280x1024@60Hz,AudioNone
[DIp]=1101:DVI1920x1080@60Hz,AudioNone
[DIp]=1110:DVI1920x1200@60Hz,AudioNone
EDID Control
EDID (Extended Display Identification
Data) is a data structure that is used
between a display and source. This data is
used by the source to find out what audio
and video resolutions are supported by
the display then from this information the
source will determine what the best audio
and video resolutions are to be outputted.
While the objective of EDID is to make
connecting a digital display to a source
a simple plug and play procedure issues
do arise when multiple displays or video
matrix switching is introduced because of
the increased number of variables.
By pre-determining the video resolu-
tion and audio format of the source and
display device we can remove some of
the EDID hand shaking process thus mak-
ing switching quicker and more reliable.
Instructions on these setting can be found
on the right
RS232 Pin Assignment
MT0404-A40 reMOTe cOnTrOl cOnsOle
PIN Assignment PIN Assignment
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 57600 bps
Data Bit: 8-bit
Parity: None
Stop Bit: 1-bit
Flow Control: None
MX44AB User ManUal
06
contact support@blustream.co.uk / [email protected]
CONNECTION DIAGRAM
1 2 3 4
MAXIMUM OF 4 SOURCES
Control
Processor
ZONE
01
ZONE
02
ZONE
03
ZONE
04
ZONE
01
ZONE
02
ZONE
03
ZONE
04
DISPLAY
SOURCE 01
SOURCE 02
SOURCE 03
SOURCE 04
IR Emitter
Link to source
ZONE 01
ZONE 02
ZONE 03
ZONE 04
IR Receiver
Link to control device
MX44AB
Cat 5/5e/6
RS232
HDMI
Stereo Audio
IR Cable
MX44AB User ManUal
07
contact support@blustream.co.uk / [email protected]
Package Contents:
•1x MX44AB
•1x 12V/2A DC power supply
•1x Remote control
•4x IR Transmitter
•5x IR Receiver
•1x mounting kit
•1x user manual
Maintenance
Clean this unit with a so, dry cloth. Never use
alcohol, paint thinner or benzene to clean this unit.
NOTES
www.blustream.co.uk / www.blustream.com.au
Inhaltsverzeichnis
Andere Bluestream Schalten Handbücher
Bluestream
Bluestream SW41AB-V2 Bedienungsanleitung
Bluestream
Bluestream Custom Pro Matrix Bedienungsanleitung
Bluestream
Bluestream SW21AB-V2 Bedienungsanleitung
Bluestream
Bluestream SM11EARC-8K Bedienungsanleitung
Bluestream
Bluestream OPT41AU Bedienungsanleitung
Bluestream
Bluestream MFP72 Bedienungsanleitung
Bluestream
Bluestream MFP112 Bedienungsanleitung
Bluestream
Bluestream SW21AB-V Bedienungsanleitung
Bluestream
Bluestream SW21AB-V2 Bedienungsanleitung
Bluestream
Bluestream SW41HDBT Bedienungsanleitung
