Bluetti AC200MAX Bedienungsanleitung
AC200 Portable Power
Station
User Manual
1
Safety instructions
Please observe the following instructions to ensure safe usage:
1. Do not alter or disassemble this product.
2. Do not move during charging or using it, because the vibration and impact during
3. moving will lead to poor contact of output interface.
4. In case of fire, use dry powder fire extinguishers for this product. Do not use water
fire extinguisher, which may cause electric shock.
5. Close supervision is required when using this product near children.
6. Please confirm the rated specification of your load, and do not use it beyond the
specification.
7. Do not place the product near heat sources, such as electric furnace and heaters.
8. Not permitted on aricrafts because the battery capacity exceeds 100Wh.
9. Do not touch the product or the plug-in points if your hands are wet.
10. Check the product and accessories prior to every use. Do not use if it is damaged or
broken.
11. Please unplug the AC adapter from the wall outlet immediately in case of lightning
stroke, which may cause heating, fire and other accidents.
12. Use original charger and cables.
2
1. Packing list
No.
Product
Quantity(pcs)
standard
option
1
Power Station
1
√
2
AC adapter (including AC charging cable)
1
√
3
MC4 Solar charging cable (MC4 to XT90)
1
√
4
Car charging cable (car to XT90)
1
√
5
XT90 to aviation plug (input)
1
√
6
User manual
1
√
7
Warranty card
1
√
8
Certificate
1
√
9
12V / 25A aviation plug to XT60 (output)
√
10
12V / 25A XT60 to spc45 (output)
√
11
12V / 24V lead acid battery charging cable
XT90 to Red Black clamp (input)
√
12
Connector for dual AC adapter (Female 7909
to XT90)
√
13
Trolley
√
14
Carry bag
√
（1）Standard( accessories included)
（2）Options( not included, buy separately from seller)
The picture is for reference only, take the object for standard.
3
2. Function introduction
1. Power button 7. 12V / 25A output
2. 12V / 10A cigarette lighter port 8. 12V / 3A output
3. Type-C charging port 9. PV / car input port
4. Touchable interaction LCD display 10. AC adapter input port
5. USB output x 4pcs 11. Wireless charging x 2pcs
6. US AC output x 6pcs
(EU/UK AC output x 2 pcs)
Note:
AC stands for alternating current. PV stands for photovoltaic(solar charging).
DC stands for direct current. Car stands for automobile electric energy.
4
3. Startup and shutdown operation
(1) Start up: short press the power button, the indicator light is on, and the machine is in
standby mode.
(2) Shutdown: press and hold the power button for more than 2 seconds, and the
indicator light will be off and the machine shut off.
The LED indicator lamp status warning
BMS Over current or short circuit
protection
Turn off after the indicator light flashes
BMS Startup timeout
The indicator light flashes and not shut down
Normal startup
The indicator light on
Normal shutdown
The indicator light off
(3) DC power switch and AC power switch are integrated in the interaction LCD
screen(Figure 1),press“DC ON/OFF”button and “AC ON/OFF”button on the screen to turn
on/off the DC /AC output.
4. How to use the touch screen
Interaction LCD screen(Information Vision) supports below functions:
(1) Real time display of voltage, current, power, temperature and state of charge and
discharge.
(2) The user can adjust the output voltage, frequency, charging mode, power
consumption mode and time information according to the setting column.
(3) Support energy-saving, and enable Super ECO mode to save more than 30% of
useless energy loss.
(4) Support users to view fault information, historical fault information, software version
independently.
5. The operation steps of touch screen
Warm tip: ●The touchable LCD screen is a resistance screen. we recommend to press
the touch button by fingernail lightly until it "beeps".
●In order to maximize the lifespan of the LCD screen, please avoid direct sunlight on it.
(1) When press the power button,it will enter the main interface of the LCD display screen:
5
(
Figure
1
)
a. Homepage button g. Date/Time
b. Settings button h. DC load information display button
c. Data button i. DC ON/OFF button
d. Faults button j. AC ON/OFF button
e. PV/Car charging display button k. Adapter charging display button
f. BMS information display button l. AC load information display button
(2) Click the settings button in the main interface (Figure 2) to enter the setting interface
as follows (Figure 3) :
Warm tip:Please enter the setting interface to set the date and time according to the
local time zone, and check the output voltage, frequency and other parameters for the first
time.
The default:
JP output:100V/50Hz
US output:120V/60Hz
EU output:230V/50Hz
UK output:230V/50Hz
DC Input Source:PV (solar)
ECO Mode:NO
Press “Next” button to enter language and date setting as below（Figure 3）:
6
Language:Japanese, English
Date and time:2000-00-00、00：00：00
Please set the "Date and time" at least once every 2 weeks.
Press to configure it.
（
F
igure
2
）
（
F
igure
3
）
(3) Return to the main interface (Figure 1), click the “Data” button to enter the page
(Figure 4) :
●Click the “Product Info” button, you can view the product model, control software version,
monitoring software version, BMS monitoring software version and display software
version in turn;
●Click the “ Inverter & Charger Info” button, you can view the PV / Car operation and the
adapter operation status ,DC out operation and AC out operation in turn, which can also
be accessed directly from the shortcut key on the main interface;
7
●Click the “BMS Maintenance” button, you can view the operation information of BMS,
and this part can also be accessed directly from the shortcut key in the main interface;
●Click the “Fault History” button, you can view all the fault information generated by the
machine. All the fault codes recorded here. According to the fault codes, return to the
main interface and click the fault button to view the corresponding fault information. Fault
History is retained up to 10 years if not manually cleared.
(
F
igure
4)
(4) Return to the main interface and click the fault button (Figure 1) to view the current
fault information: the fault button will display orange if there is a fault, click to enter the
corresponding fault information, then the gray light will turn into orange.
6. Charging the product
There are five ways to charge:
(1) Charging mode 1: From AC Wall outlet
● Press the main power button to start charging after connecting the product to the AC
wall outlet, the charging will automatically stop when it reaches 100%.
(2)Charging mode 2: From the solar panels
8
●Choose the solar panel with working voltage DC 35V-150V.
●Connect the solar panel to the product via solar charging cable included.
●Plug and play charging: it will start charging automatically after connecting the solar
panel to the product even it is off status.
● Max. current of the solar is 12A.
(3) Charging mode 3: From the car lighter port
●Press the power button and connect it to the cigarette lighter port through the car
charging cable.
●Enter the setting interface as shown in (Figure2) through the display screen to set DC
input source to car mode; The product can be charged with 8.2A maximum current.
(4) Charging Mode 4: From a generator (gasoline, propane or diesel)
●Connect the AC adapter input to the generator and the output port to the AC charging
port of the machine.
●Press the power button, the product will be charged, the charging will automatically stop
when it reaches 100%.
(5) Charging mode 5: from lead acid battery
9
●Connect to the positive and negative poles of the battery through the provided solar
charging cable(pay attention to distinguish the positive and negative poles of the battery,
the red head is the positive pole, and the black head is the negative pole) .
●Enter the setting interface as shown in (Figure 2) through the display screen to set DC
input source to “car mode” .The product can be used for car charging mode, with the
maximum current of 8.2A. The product has the function of anti over discharge for lead-
acid battery.
7. Discharging
(1) Turn on 12V / 25A, 12V / 3A, cigarette lighter port, USB and type C output: first, press
the power button, then enter the main interface through the touch screen, click the DC
ON/ OFF button and confirm, Turn off these output, and also click the DC on / off button
and confirm.
(2) Turn on AC output: first, press the power button, then enter the main interface through
the touch screen, click the AC ON/ OFF button and confirm. Turn off these AC output
ports, and also click the AC ON/ OFF button and confirm.
8. Application scenario
(1) Outdoor: Car equipment: car fridge, car vacuum cleaner and other car equipment;
Camping equipment: garden electric tools (power tools such as blowers, lawn mowers,
electric drills, electric saws), BBQ grills, LED lights, etc.
(2) Indoor: Refrigerator, kitchen devices such as kettle, toaster, blender, coffee maker,
rice cooker, laptops, phones, lighting, etc.
Andere Handbücher für AC200MAX
7
Inhaltsverzeichnis
Andere Bluetti Stromversorgung Handbücher
Bluetti
Bluetti EP500 Bedienungsanleitung
Bluetti
Bluetti EP500Pro Bedienungsanleitung
Bluetti
Bluetti AC200MAX Bedienungsanleitung
Bluetti
Bluetti EB70S Bedienungsanleitung
Bluetti
Bluetti B300 Bedienungsanleitung
Bluetti
Bluetti EB70S Bedienungsanleitung
Bluetti
Bluetti AC2A Bedienungsanleitung
Bluetti
Bluetti B300 Bedienungsanleitung
Bluetti
Bluetti B300 Bedienungsanleitung
Bluetti
Bluetti EB70S Bedienungsanleitung
Bluetti
Bluetti EB70 716Wh Bedienungsanleitung
Bluetti
Bluetti B300 Bedienungsanleitung
Bluetti
Bluetti AC300 Bedienungsanleitung
Bluetti
Bluetti AC180P Bedienungsanleitung
Bluetti
Bluetti AC60P Bedienungsanleitung
Bluetti
Bluetti AC180 Bedienungsanleitung
Bluetti
Bluetti AC200MAX Bedienungsanleitung
Bluetti
Bluetti EP500Pro Bedienungsanleitung
Bluetti
Bluetti AC200L Bedienungsanleitung
Bluetti
Bluetti AC180 Bedienungsanleitung
