Speech 001
- 5 -
II-1. Charge the Batteries (please refer to Fig.2)
Thank you for buying the Bluetooth Blumax Speech 001.
Before you use it for the first time, please charge the batteries for 6 hours.
After this, you can fully charge the batteries in 4 hours.
Warning: Use only rechargeable batteries.
II-2. Turn on the Blumax Speech 001
If the Blumax Speech 001 is powered off, press and hold “On/Off ” for 2 seconds.A long tone will indicate
that the Blumax Speech 001 has turned on. At the same time, the blue LED will flash for a second. And then,
the blue LED will keep on flashing every 3 seconds.
II-3. Pair the Blumax Speech 001 with Your Bluetooth Mobile Phone
II-3-1. Put the Blumax Speech 001 in pairing mode
When the Blumax Speech 001 is powered off, press and hold “On/Off ” for 5 seconds. In the first 2 seconds,
a long tone will indicate that the Blumax Speech 001 has turned on. At the same time, the blue LED will
flash for a second. At the end of the 5 seconds, a double tone will be heard. Then the red and blue LEDs
will flash alternately, which indicates the Blumax Speech 001 has entered into pairing mode.
Note: Make Sure the batteries are fully charged.
II-3-2. Put your Bluetooth Mobile Phone in pairing mode
II-3-2-1. Follow the operation manual of your Bluetooth mobile phone to start the pairing process. Typically,
this has to be done by going to a setup or connect menu and then selecting the options to show Bluetooth
devices. Bluetooth may take several seconds to establish a connection.
II-3-2-2. Your phone's display will indicate that it has found the new device “BLUMAX SPEECH 001 ”. When
you want to pair it, the phone's display would demand a passkey or PIN, then you can enter a sequence of
“0000”.
II-3-3. Pair the Blumax Speech 001 with your Bluetooth Mobile Phone
The blue LED of the Blumax Speech 001 will flash every 2 seconds indicating successful pairing. The
phone may also ask whether you want to change the Blumax Speech 001's name. We recommend you
should keep the name “BLUMAX SPEECH 001” so please do not change it.
Note: If pairing does not occur as expected, turn off the Blumax Speech 001 and your phone, then wait for
10 seconds. Turn them on again and repeat from Step 3-1 to Step3-3.
