Introduction
Thank you for choosing BMS.
Please read this manual carefully before using the camera. Please make sure you are
understanding this manual completely. In case something is not clear, please get in
contact with your supplier or local dealer. They will be at your service. In case you
have any additional uestions about this manual, please forward them, by email, to
A camera is a precision instrument with delicate glass components. Please
handle with care.
The BMS EcoCam camera has a 5 or 8 megapixel high uality camera sensor, auto
focus, extra long goose neck, WiFi connection, integrated LED illumination in the
head, HDMI with HD1080P resolution, VGA output, ability to annotate, draw or
mark over live or saved images and is easily adaptable for microscopy use with
adapters.
It is recommended that an adult is supervising at all time.
The BMS EcoCam camera makes it possible to study a variety of different 3D
objects and documents but also structures and textures of botanical and zoological
nature at cell level when connected to a microscope. Both prepared slides or self
made slides can be observed.
This camera is developed according the latest technology on optical and mechanical
details.
Safety Information
Always disconnect mains plug from power point before maintenance
Work in a clean and proper environment
Think of the safety of yourself and those working around you
Clean all parts that come in contact with the observed specimen to
prevent infection
Place the camera on a sturdy, level table or working surface
Always use original accessories and power adapters
Caution
The delicate components may get damaged if the camera is not handled with care.
Use the camera in a clean environment. Do not use it when it is subject to direct
sunlight, high temperatures, humidity or dust.
Carry the camera with care, do not carry it by just holding the goose neck.
Please make sure to always use the correct 5V/2A (for BMS EcoCam 5) or 3A (for
BMS EcoCam 8) BMS adapter with your BMS EcoCam camera.
1
