Page | 4
Safety
is machine is a high-performance battery operated tool.
Failure to follow the warnings and instructions may result in
an electric shock, re or serious injuries.
• Always operate the tool with personal
protection equipment (safety helmet and
eye protection, etc...). Using the appropri-
ate safety equipment at all times will avoid
body injury.
• Keep children and bystandards away
while operating this tool. Distractions may
cause serious accidents.
• Do not aim the tool at
those standing around your work area. Se-
rious accidents can happen if you mishan-
dle this tool.
• Do not place your hand
or position the machine mouth (between
arm A and the curl guide) near the body.
is will cause serious injury.
• Do not attempt to dismantle, modify or
perform any major maintenance on this
tool. Any modication may result in a de-
teriorations of the tool’s performance and
may cause serious injury and void any war-
ranty.
• Make sure that the electric switch is in
the o position when the tool is not being
used or when abnormalities occur. When
changing or adjusting the wire coil, or
when changing the battery pack, make sure
to turn o the main power switch and lock
the trigger.
• Do not place ngers or hands in the wire
coil area. is may result in distortion of
the coil and may cause injury to you.
• Do not operate this tool
in the rain or areas where
moisture is present. is may result in
electrical shock or accident.
• Stay particularly alert while working in
a lo area. Do not operate any power tool
under the inuence of drugs, alcohol, or
medication. A moment of inattention may
result in serious injury to you or someone
near you.
• Do not operate this tool in a hazardous
area containing ammable liquid, gas or
powders which may ignite and cause a re.
• e charger has been de-
signed to use standard AC
power (100-240V ~ 50-60Hz). Do no re-
charge the battery using a generator power
supply as this will cause the charger to mal-
function.
• Our batteries charge best when the ambi-
ent temperature is between 32°F and 113°F.
Super-cooling or over-heating environ-
ments are not suitable for charging.
• Continuous use of the
charger is not advised as this will shorten
the life span of the battery and the perfor-
mance of the charger itself. When not in the
charging mode the power supply must be
turned o.
• Please do not carry the charger by the
cord. Do not pull out the power cord from
the wall socket with a strong force, this will
damage the cord and break the wires or
cause a short circuit. A damaged cord must
be repaired or replaced immediately.
• Use only the specied charger that came
with your machine. Using a unauthorized
charger may result in damage to the battery
components and possible explosion.
• Avoid battery terminal
contact with other metal objects. Trying to
recharge the battery with an external wire
could result in a short circuit of the battery.
• Do not throw away the
protective battery cap. Use it to cover the
terminal when not in use.
