Bodyguard BG490 Series Bedienungsanleitung
1
User Manual
BG490 Series
1
Table of Contents
1. Getting Started....................................................... 1
1.1 General Description....................................1
1.2 Product View.................................................2
2. Camera Operations............................................. 4
2.1 Power Supply................................................ 4
2.2 SD Card Information................................ 4
2.3 Camera Modes............................................. 5
2.4 Manual Image / Video Capturing........6
2.5 Manage Images and Videos................... 6
2.6 Trigger Modes.............................................. 7
3. Camera Display & Settings...............................8
3.1 Basic Key Function & Display............... 8
3.2 Camera Setup Options............................. 9
4. PIR Detection Zone........................................... 12
5. Technical Specifications..................................13
6. Parts List................................................................ 14
WARRANTY CARD..........................................15
1
1. Getting Started
1.1 General Description
BG490, is a digital infrared surveillance camera
monitored by a highly sensitive Passive Infrared
(PIR) motion sensor that can be triggered by any
human or animal movements. After being triggered,
the camera then automatically captures pictures or
video clips.
This camera is powered by 4 or 8 AA batteries. It
can sustain in stand-by mode alone for up to 6
months on 8 AA batteries, is designed for outdoor
use, and resistant against rain and snow.
Has the following interfaces: a 2" color LCD display
screen, operation panel, USB connector, SD card
slot and an external DC power connector.
Difference:
BG490-K30M
56pcs of 940nm Black IR LED (invisible)
BG490-I30M
56pcs of 850nm IR LED (visible)
2
1.2 Product View
Front View
3
Inner Panel View
Bottom View
4
2. Camera Operations
2.1 Power Supply
4 or 8 AA batteries high-density, high-performance
rechargeable or non-rechargeable alkaline batteries
are recommended. You can also use NiMH batteries
as well, but each battery should be above 1.5V.
A DC 6-Volt, 2 Amp external power supply adapter
can also be used to power the camera (not
included).
NOTE: when using only 4 AA batteries, insert them
using the 3 top positions along with the first bottom
position (the left position) or the last 4 bottom positions
(the right 4 positions).
2.2 SD Card Information
To take full advantage of the latest technologies, we
recommend Class 10 SD cards or better, which have
fast transfer speeds and long durability for
extensive shooting in the most extreme outdoor
conditions. Some SD cards are Secure Digital High
Capacity (SDHC) PRO cards, which only work with
SDHC compatible devices. Please check that your
product is compatible with SDHC cards.
Insert the SD card into the camera before
turning on the camera
5
This camera supports up to a 32GB capacity SD
card, and has no built-in internal memory. The
camera will not function without the SD card
properly inserted into the camera.
Make sure the SD card is unlocked before
inserting it into the camera
If you experience any problems with an
inserted SD card, try reformatting the SD
card through the camera’s main settings
option.
2.3 Camera Modes
The different modes are according to the position of
the power switch. The three basic operation modes
as below:
OFF Mode
Switching the camera to the OFF position turns
the camera off. The camera will still consume a
small amount of power while in “OFF” mode. It is
recommended to remove the batteries if the
camera will not be used for a long period of time.
ON Mode
Switching the camera to ON position turns the
camera on. When movement occurs within the
monitored region, the camera will take pictures or
record videos automatically according to the
previous programmed settings. After switching
6
the camera to the ON position, the motion
indication LED (red) will blink for about 10
seconds. This time interval is for you to position
the camera for automatic surveillance operation.
SETUP Mode
Switching the camera to the SETUP position
allows you customize your camera settings or play
back pictures and videos the camera has taken on
the LCD display. The camera will automatically
shut down after a few minutes of no operation.
2.4 Manual Image / Video Capturing
Place the camera in SETUP Mode and press SHOT
to manually capture photos or record video. Press
SHOT again to stop video capture.
2.5 Manage Images and Videos
Place the camera in SETUP Mode and press
Playback/Preview to view images or videos. The
latest image or video will be shown on the LCD
screen.
To view:
Press ▲or ▼to view the previous or next image or
video.
To delete:
Find the image or video you want to delete. Press
the Delete key. Press OK to delete, or press MENU
7
again if you decide not to delete the image or video.
Note:the DEL button works only in Playback state.
2.6 Trigger Modes
There are 3 trigger modes for the cameras.
PIR trigger: PIR trigger is constantly working
when the camera is on. The camera takes
photos/videos only when motion is detected.
Time lapse: The time lapse default setting is OFF
by default. If the timer trigger interval is manually
set to a non-zero value, the cameras start to work at
a preset interval.
PIR & Timer trigger: If you want both PIR
trigger and time lapse, you need to set PIR
trigger to “normal, high or low ”sensitivities
according to the external environments. Be sure to
also set the time lapse to a desired non-zero value.
The cameras will capture pictures or videos in
preset time intervals even if there is no motion
detected, and will capture pictures and videos when
motion is detected.
*Time Lapse and PIR Trigger cannot be set to off at the same time.
Additional PIR settings to note:
PIR Interval
This setting indicates how long the PIR sensor will
be disabled after each camera triggering. During
this time the PIR sensor will not react to any
detected motion.
8
3. Camera Display & Settings
3.1 Basic Key Function & Display
To update the camera settings, place the power
switch to the ON position.
MENU: Enter the program menu in preview
mode
▲▼◄►: Parameter settings as described in
the user’s manual
OK: Save parameter settings and play videos
I►: Exchange between playback and preview
DEL: Delete an image
: Capture a photo or record a video manually
When the camera is on, the screen will activate and
display the following:
30M
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
