BOGASING G4 Bedienungsanleitung
G4
Wireless bluetooth speaker
User Manual
Made in China
CONTENTS
English
中文
Italiano
Español
01-11
12-22
23-33
34-44
Deutsch
Français
Pусский
日本語
45-55
56-66
67-77
78-88
Thank you for purchasing the BOGASING-G4 Bluetooth speaker. Please
read the User Manual before use and keep it properly for future
reference. If you have any questions or comments, please contact us by
email: [email protected]
English
01
EN
Specifications
Bluetooth Version:
Bluetooth Range:
Battery Capacity:
Output Power:
Model:
5.3
Up to 18m/60ft
(Unobstructed)
8000 mAh
50W
G4
Weight:
Input Power:
Dimension:
Charging Time:
Frequency Response:
830g
5V 2A
8.86*2.52*3.39inch
3 - 4 hours
48Hz-20KHz
02
EN
8.86inch
3.39inch 2.52inch
Accessories
3.5 mm AUX cable USB-C cable
Button Configuration Status indicator light
Battery indicator light
Power ON/OFF/Sound effect mode
Switch modes/Reset
Play/Pause/Answer/End a call
Volume down/Previous track
Volume up/Next track
USB-C charging port
TF-card slot
Aux-in port
03
EN
Status Indicator
a. Bluetooth light
- Ready to connect: Red and blue lights blinking alternately;
- Connected: Glows solid.
b. Sound effects indicator
- 3D: Glows solid blue
- Vocal: Glows solid red
- Super Bass: Glows solid green
(Note: The sound effect indicator has a memory function, and it will default to the last sound effect you
used when connecting again.)
LED Indicator
Battery Indicator
・When the battery runs low, the speaker make the sound of "beep beep" to prompt the speaker needs to
be charged at this time.
・The battery light blinks while charging. When the battery is fully charged, the blinking stops and the
battery light glows solid.
04
EN
75%-100%
50%-75%
25%-50%
0-25%
BUTTON OPERATION FUNCTION DESCRIPTION
Press twice quickly Enter into True Wireless Stereo (TWS) mode
Press and hold Turn ON/OFF.
Press Switch sound effect modes in turn (3D, Vocal, and Super Bass).
Press Switch the playing modes (Bluetooth, Aux-in, USB-C or TF-card)
Press and hold Press and hold it until you hear a prompt tone to clear all paired
devices or restore to factory settings.
Press
1. Play/Pause.
2. Answer the incoming calls.
3. End the current call.
Press and hold 1. Press and hold for 2s, decline an incoming call.
2. Press and hold for 3s, disconnect the bluetooth device.
Press twice quickly Call back the last call.
05
EN
1. Power on the speaker and the indicator light blinking alternately between red and blue.
2. On your device, enable the Bluetooth feature. Select the speaker which named is "BOGASING-G4"
from the device list.
3. Once connected, you will hear a prompt tone and the indicator light glows solid.
Bluetooth Connection
Press Volume down, total 16 levels
Press and hold Previous track
Press Volume up, total 16 levels
Press and hold Next track
06
EN
Wired Connection
Connect your device with the speaker via 3.5mm audio in cable. When aux cable is plugged, play mode will
automatically switch to AUDIO IN mode.
Multiple Play Modes
1. This speaker supports up to 128GB TF-card; Supports music format: APE/FLAC/WAV/MP3.
2. Insert the TF card into the slot and automatically play the audio file in sequence after recognition.
3. When AUX or USB-C cable is plugged, play mode will automatically switch to AUDIO IN or USB-C mode. If the
bluetooth is connected, press " " button to switch the play mode.
07
EN
TWS Pairing
1. Make sure both speakers are powered on and they are disconnect with other devices;
2. Press the " " button twice quickly on one of the speakers to enter TWS pairing mode;
3. After two speakers are paired, you will hear a prompt tone. At this time, the indicator light of first speaker is
blinking, the other one is solid;
4. Enable the Bluetooth feature of your cell phone or other devices, find and connect the speaker which named of
"BOGASING-G4";
5. After the two speakers are successfully paired, it will automatically enter the TWS mode when the next time you
turning ON, no need to re-pair;
6. If the speaker was ever paired with other speakers, Please press and hold the " " button to reset it. Restart
the speaker after reset, and then refer to steps 1-4 to enter the TWS pairing.
7. In TWS mode, only the main speaker can be use for hands-free calling when there is a call, the other speaker has
no sound.
08
EN
Inhaltsverzeichnis
Sprachen:
Andere BOGASING Sprecher Handbücher
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung