Bogen SAH15 Bedienungsanleitung
• 5-, 15-, and 30-watt models with built-in amplifiers
• All models operate from 24V DC power source
• Digital switching amplifier technology provides low
DC current draw and heat dissipation compared to
conventional analog amplifiers
• Low heat dissipation allows units to operate with
continuous background music and in higher ambient
temperatures than conventional analog self-ampli-
fied horn speakers
• Excellent extended frequency response from 1.6"
diameter voice coil and 90mm, 12-ounce magnet
structure (SAH5 and SAH15) or 100mm, 16-ounce
magnet structure (SAH30)
• Predictable dispersion pattern over the full
frequency range ensures excellent intelligibility and
ease of layout
• 3 ways to position speaker (rotate, tilt, and swivel)
• Weatherproof, UV-protected plastic housing
• Simple and secure cast aluminum swivel mount
• Screw terminal strip for easy wire connections
• Indexed volume control knob
• Easily removable access cover
• Slot in the base allows strapping to be used as a
means of mounting the horn to electrical boxes
(mounting strap included)
• Mountable to an I-beam flange using Bogen's BC1
beam clamp (not included)
• Two-Year Warranty
Features
Description
Specifications subject to change without notice.
© 2005 - 2006 Bogen Communications, Inc.
Part No. 54-8023-16B 0608
5W, 15W, & 30W
High-Efficiency
Digital Switching
Self-Amplified Horns
Models SAH5, SAH15 & SAH30
The SAH5, SAH15, and SAH30 powered horn loudspeakers employ digital switching amplifier technology
resulting in low DC current draw and low heat dissipation.This means fewer power supplies, longer cable
runs, and the capacity to work at higher ambient temperatures when compared to conventional analog self-
amplified horn speakers.
The horn loudspeakers can be positioned in any orientation (rotate, tilt, or swivel).The shape of the horn flare
provides a controlled dispersion of sound for better intelligibility.
They can be used in any environment, indoors or outdoors, without affecting sound quality.
SAH5
SAH15
SAH30
Self-Amplified paging systems are made up of equipment that
consume or provide operating current.To operate properly, the
system needs to provide at least as much 24V current as it con-
sumes.
Each product has a Current Units number.This number is either
positive, negative, or zero to indicate how much current
it provides or consumes from the system.
Note: 1 CU = 50 mA
UnderstandingCurrentUnits
Provides
System Current Consumes
System Current No Draw
on the System
The SAH5, SAH15, and SAH30 shall be self-amplified
horn loudspeakers. All loudspeakers shall operate
from a 24V DC (nominal) power source. All models
shall employ digital switching amplifier technology to
provide low DC current draw and heat dissipation.
The shape of the horn flare shall provide a controlled
dispersion of sound for better intelligibility.
All models shall include a screw terminal strip and a
volume control knob located under a removable
access cover.
The SAH5, SAH15, and SAH30 shall include a simple
to use and secure cast aluminum swivel mount and a
mounting strap to permit mounting to electrical
boxes. All shall be capable of being positioned in any
orientation (rotate, tilt, or swivel).
All models shall be comprised of weatherproof, UV-
protected plastic housing.
All models shall be mountable to an I-beam flange
using Bogen's BC1beam clamp (not included).
Product dimensions of all models shall be 10-5/8" W x
12" H x 11-1/2" D. Product weight for all models shall
be 6 lb.
SAH5
The SAH5 shall be a 5-watt self-amplified horn
loudspeaker.The typical current consumption shall be
4 CU (200 mA).The loudspeaker shall operate from a
24V DC (nominal) power source.The maximum out-
put level shall be 119 dBspl.The input sensitivity shall
be 125 mVrms. The frequency response shall be 275
Hz - 14 kHz. The input impedance shall be 2k ohms.
The dispersion shall be 120° x 90º.
SAH15
The SAH15 shall be a 15-watt self-amplified horn
loudspeaker.The typical current consumption shall be
9 CU (450 mA).The loudspeaker shall operate from a
24V DC (nominal) power source.The maximum out-
put level shall be 124 dBspl.The input sensitivity shall
be 125 mVrms. The frequency response shall be 275
Hz - 14 kHz. The input impedance shall be 2k ohms.
The dispersion shall be 120° x 90º.
SAH30
The SAH30 shall be a 30-watt self-amplified horn
loudspeaker.The typical current consumption shall be
17 CU (850 mA).The loudspeaker shall operate from
a 24V DC (nominal) power source. The maximum
output level shall be 127 dBspl. The input sensitivity
shall be 125 mVrms.The frequency response shall be
275 Hz - 14 kHz. The input impedance shall be 2k
ohms.The dispersion shall be 120° x 90º.
Architect and
Engineer
Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
201-934-8500 FAX: 201-934-9832
Web Site: www.bogen.com
Technical
Specifications
SAH5 SAH15 SAH30
Typical Current Consumption: 4 CU (200 mA) 9 CU (450 mA) 17 CU (850 mA)
Power Supply Voltage (nominal) 24V DC 24V DC 24V DC
Max. Power Rating: 5W 15W 30W
Max. Sound Level: 119 dBspl 124 dBspl 127 dBspl
Input Sensitivity: 125 mVrms 125 mVrms 125 mVrms
Frequency Response: 275 Hz - 14 kHz 275 Hz - 14 kHz 275 Hz - 14 kHz
Input Impedance: 2k ohms 2k ohms 2k ohms
Dispersion: 120° x 90º 120° x 90º 120° x 90º
Dimensions (W x H x D): 10-5/8" x 12" x 11-1/2"10-5/8" x 12" x 11-1/2"10-5/8" x 12" x 11-1/2"
Weight: 6 lb. 6 lb. 6 lb.
Dieses Handbuch passt für folgende Modelle
2
Andere Bogen Horn Handbücher
Beliebte Horn Handbücher anderer Marken
Elk Products
Elk Products 45 Bedienungsanleitung
Valcom
Valcom V-1050C Bedienungsanleitung
Cooper Wheelock
Cooper Wheelock DB3 Series Bedienungsanleitung
Altec Lansing
Altec Lansing 811B HF HORN Bedienungsanleitung
RF Elements
RF Elements UltraHorn CC Series Bedienungsanleitung
Edwards Signaling
Edwards Signaling 869DSTR-G1 Series Montageanleitung
