Bogen Nyquist NQ-S1810CT-G2 Bedienungsanleitung

VoIP Speaker Configuration Guide

NQ-S1810CT-G2, NQ-S1810WT-G2

740-00121B

220518

Contents

Configuring the Nyquist VoIP Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Using the Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Updating Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Network Settings Tab Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Configuration Settings Tab Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Standalone Operation Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Setting DSP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Setting the Channel Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Adjusting Volume Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Knob Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Intercom Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Accessing Log Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Configuring the Nyquist VoIP Speakers

The Nyquist VoIP Ceiling Speaker Gen 2 (NQ-S1810CT-G2) and Nyquist VoIP Wall Baffle

Speaker Gen 2 (NQ-S1811WT-G2) are VoIP talkback speakers designed to work with the

Nyquist Series IP network-based intercom and paging solution.

The ceiling talkback speaker assembly consists of an 8" cone speaker and VoIP module

preassembled onto a 13" steel ceiling grille painted with bright white enamel.

The VoIP wall baffle talkback speaker assembly consists of an 8" cone speaker and VoIP

module preassembled onto a bright white injection-molded wall baffle speaker enclo-

sure.

Both types of speakers are 802.3af-compliant and are designed to facilitate rapid and effi-

cient deployment using existing network Power over Ethernet (PoE) ports. They also have

a Form-C relay for controlling third-party devices. These VoIP speakers enable ease of

placement wherever needed within a facility.

A short press of the appliance’s Reset button reboots the device. If you press the Reset

button for 10 seconds, the appliance returns to the factory default configuration settings.

(Returning to the default configuration settings does not change the appliance’s firm-

ware.)

The Nyquist server can automatically discover and configure the Nyquist VoIP speakers,

but you can also manage the device and manually configure some settings through the

web-based user interface (web UI). The following sections describe the process for

manual configuration. For information about using Nyquist’s automatic configuration

process, refer to the Nyquist System Administrator Guide.

To access the appliance’s UI:

Figure 1. Nyquist Appliance Login

1Access the appliance’s web UI by doing one of the following:

a) On your web browser, enter the IP address for the appliance as the URL.

b) From the Nyquist web UI navigation bar, select Stations, select Stations Status,

navigate to the device that you want to configure, and then select the Link icon.

2At the Nyquist Appliance Login page, enter username and password, and then select

The default username is admin; the default password is bogen.

The dashboard for the selected appliance appears.

Using the Dashboard

The dashboard displays the following fields:

Note: Do not use third-party Chrome browser extensions with the Nyquist user interface.

Figure 2. Nyquist Speaker Dashboard

The following buttons are available at the top of all pages in the application.

Table 1. Appliance Dashboard Fields

Device Type Identifies the model of this device.

Serial Number Identifies the serial number for the device.

MAC Address Identifies the Media Access Control (MAC) address,

which is a unique identifier assigned to network inter-

faces for communications on the physical network seg-

ment.

Firmware Version Identifies the firmware version installed on the station.

Standalone Operation Enables or disables Standalone mode.

Volume Cut Level (dB) Specifies a temporary volume setting for the speaker

during the current intercom call or page.

Note: This is a temporary adjustment that allows the user

to experiment with the loudness of the speaker and will

be reset to the normal setting on subsequent calls. To

make permanent adjustments, change the station-spe-

cific cut level settings on the Nyquist System Controller.

The value can be adjusted between -42 and 0 dB.

Table 2. Appliance Dashboard Buttons

Dashboard Displays the dashboard.

Configuration Settings Accesses the Configuration Settings page where you can

view various options or select to receive configuration

settings from the server.

Network Settings Accesses the Network Settings page where you can view

and set network settings, such as the static IP address.

Firmware Update Accesses the Firmware Update page where you can view

the current Nyquist version, update firmware to a new

version, the configuration to factory defaults, and

reboot the appliance.

Logs Accesses log files, which record either events or mes-

sages that occur when software runs and are used when

troubleshooting the appliance.

DSP Accesses the DSP page where you can view and set

parameters for Digital Signal Processing (DSP).

Updating Firmware

When you select Firmware Update from the appliance’s web UI, the Firmware Update

page appears. From this page you can determine which Nyquist firmware version the

appliance is using and if an update is available. You can also load a firmware release,

install the loaded firmware, restore the configuration to factory defaults, and reboot the

appliance.

To use the Firmware Update page:

Help Accesses the appliance’s online help.

Manual Displays the appliance’s configuration manual.

Logout Logs out of the appliance’s dashboard.

Note: A Nyquist appliance connected to the Nyquist network receives a configuration

file from the Nyquist server that includes the latest firmware available from the server.

If the firmware is different from the one installed on the appliance, an automatic firm-

ware update occurs unless the Firmware parameter for the station is left blank. Refer to

the Nyquist System Administrator Guide for more information.

Figure 3. Firmware Update Page

Table 2. Appliance Dashboard Buttons (Continued)

1On the appliance web UI’s main page, select Firmware Update to view or update the

firmware version.

2If the device is in Standalone mode, selecting the Check for Updates button checks

the Bogen website for the latest firmware version available. If a version newer than

the one currently installed is found, it is downloaded to the appliance.

3If you already have a firmware file you would like to install to the appliance, select

Upload Firmware to upload the firmware file from your computer to the appliance. A

popup screen appears that allows you to select the file that you want to upload. You

can navigate to the file’s location. After you select the file, select Upload.

4The page displays the uploaded firmware version (“New Nyquist Version”) and an

Update Firmware button appears. Select this button if you want to update the appli-

ance’s firmware to the uploaded version.

5If you want to return your appliance to its original factory configuration, select

Restore Factory Settings.

6Select Reboot Appliance to restart your appliance.

Table 3. Firmware Update settings

Current Nyquist Version Shows the version of the appliance’s currently

installed firmware.

New Nyquist Version Shows the version of the firmware that has been

loaded, though not installed, onto the appliance.

Update Firmware Available only when a new firmware version has

been loaded onto the appliance (as specified in

New Nyquist Version).

Installs the loaded firmware. A reboot may be

required after installation.

Upload Firmware Prompts the user to specify a firmware file, which

will then be loaded (though not installed) onto the

appliance.

Note: To obtain the firmware file for a specific ver-

sion, please contact Bogen Customer Service.

Check for Updates Available only when the appliance is configured

for Standalone mode.

Checks the Bogen website for the latest firmware

version available and, if it finds a version newer

than what is currently installed, downloads it to

the appliance.

Network Settings Tab Parameters

Network settings can be configured dynamically by the Nyquist server or manually by

using the appliance’s web UI.

To manually configure network settings:

1On the appliance web UI’s main page, select Network Settings.

2Select your desired network settings.

3Select Save.

Restore Factory Settings Returns the appliance to its original factory con-

figuration.

Note: This does not install the original appliance

firmware. The firmware will not be changed.

Reboot Appliance Restarts the appliance.

Table 3. Firmware Update settings

Network settings are described in the following table:

Figure 4. Network Settings

Table 4. Network Settings

IP Address Identifies the IP address assigned to the appliance.

Netmask Identifies the subnetwork subdivision of an IP net-

work.

Gateway Identifies the address, or route, for the default gate-

way.

VLAN ID Identifies the Virtual Local Area Network (VLAN) for

this appliance. Values range from 0 to 4094.

VLAN Priority Identifies the priority of the network traffic on the

VLAN. Priority can range from 0 through 7.

NTP Server Identifies the IP address or the domain name of the

Network Time Protocol (NTP) Server.

Note: This field is only editable when Standalone

Operation is enabled.

TFTP Server Identifies the host name or IP address of the Trivial

File Transfer Protocol (TFTP) server.

The specified TFTP server can be used to automati-

cally set this device’s Configuration settings via the

Get Configuration from Server button.

If TFTP Server from DHCP (see below) is set to “Yes”,

this value will be auto-configured via DHCP option

66, assuming the DHCP server has been configured

to provide option 66. For details, see the documenta-

tion for your DHCP server.

Note: A TFTP server runs on the Nyquist server on

port 69 (the standard TFTP port) and the optional

Nyquist DHCP service automatically provides this

TFTP address via option 66.

Note: If this value is unspecified, the TFTP Server

from DHCP will automatically be set to “Yes”, this

field will become read-only, and DHCP will be used to

configure this setting. To change this value, the TFTP

Server from DHCP setting must be set to No, which

makes the field editable.

Note: This setting is not available when Standalone

Operation is enabled.

TFTP Server from DHCP “Yes” means the device will use the DHCP option 66

value to retrieve an address for the TFTP Server from

DHCP.

“No” means the device will ignore the DHCP option

66 value and use the manually configured value of

the TFTP Server (see above).

Note: This setting is not available when Standalone

Operation is enabled.

Table 4. Network Settings (Continued)

Andere Handbücher für Nyquist NQ-S1810CT-G2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bogen Sprecher Handbücher

Bogen

Bogen NEAR A2 Bedienungsanleitung

Bogen

Bogen NEAR IG Series Bedienungsanleitung

Bogen

Bogen MB8TSL Bedienungsanleitung

Bogen

Bogen Speaker Line Attenuator UTI1 AUX Bedienungsanleitung

Bogen

Bogen SM1EZ Bedienungsanleitung

Bogen

Bogen ACD2X2 Bedienungsanleitung

Bogen

Bogen R6/R6T Bedienungsanleitung

Bogen

Bogen Quantum WBS810QIP Bedienungsanleitung

Bogen

Bogen SP158A Bedienungsanleitung

Bogen

Bogen FMH15T Bedienungsanleitung

Bogen

Bogen BDT30A Bedienungsanleitung

Bogen

Bogen VRS1 Bedienungsanleitung

Bogen

Bogen Easy Design HS15EZ Bedienungsanleitung

Bogen

Bogen HFCS1 Leitfaden

Bogen

Bogen A12 Bedienungsanleitung

Bogen

Bogen NQ-S1810CT-T1 Bedienungsanleitung

Bogen

Bogen NYQUIST NQ-S1810WT-G2 Bedienungsanleitung

Bogen

Bogen NEAR Orbit OCS1 Leitfaden

Bogen

Bogen SCW20 Bedienungsanleitung

Bogen

Bogen 8805 Bedienungsanleitung

Bogen

Bogen HFCS1 Leitfaden

Bogen

Bogen BBFM6 Bedienungsanleitung

Bogen

Bogen HFSF1 Bedienungsanleitung

Bogen

Bogen MPS1B Leitfaden

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung