02 © Böhmer-AG 2020
AG-178FD / AG-192FD
Safety
Use the equipment and accessories etc. in
accordance with these instructions, taking
into account working conditions and the
work to be performed. Using the equipment
for operations different from those intended
could result in hazardous situations.
Before use, inspect the equipment for
misalignment or binding of moving parts,
loose components, damage or any other
condition that may affect its operation. If
damaged, have the equipment repaired by
an authorized service centre or technician
before use.
Always keep the equipment and accessories
(cutting tools, nozzles, bits etc) properly
maintained. Keep the equipment, controls
and handles dry and free from dirt, oil and
grease.
Store the equipment out of reach of children
or untrained persons. To avoid burns or re
hazards, let the equipment cool completely
before transporting or storing. Never place
the equipment in places where there are
ammable materials, combustible gases or
combustible liquids etc.
The equipment is not weatherproof, and
should not be stored in direct sunlight, at
high ambient temperatures or locations that
are damp or very humid.
General Work Safety
Work areas should be clean and well it.
Do not operate the equipment if bystanders,
animals etc are within operating range of
the equipment or the general work area.
Personal Safety
Keep packaging away from children - risk
of suffocation! Operators must use the
equipment correctly. When using the
equipment, consider conditions and pay due
care to persons and property.
Prevent unintentional starting of the
equipment - ensure equipment and power
source switches are in the OFF position
before connecting or moving the equipment.
Do not carry equipment with hands/ngers
touching any controls. Remove any tools
or other items that are not a part of the
equipment from it before starting or
switching on.
Stay alert and use common sense when
operating equipment. Do not overreach.
Keep proper footing and balance at all
times. Do not use equipment when tired
or under the inuence of drugs, alcohol or
medication. This equipment is not intended
for use by persons with reduced physical,
sensory or mental capabilities.
You must wear appropriate protective
equipment when operating, servicing, or
when in the operating area of the equipment
to help protect from serious injury, including
eye injury, inhalation of toxic fumes,
burns, and hearing loss. Always wear eye
protection. Protective equipment such as
respirators, non-skid safety shoes, hard hat,
hearing protection etc should be used for
appropriate conditions. Other people nearby
should also wear appropriate personal
protective equipment. Do not wear loose
clothing or jewellery, which can be caught in
moving parts. Keep hair and clothing away
from the equipment.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
General
Do not force the equipment. Use the correct
equipment for your application. The correct
equipment will perform better and be
safer within its design parameters. Do not
use the equipment if the ON/OFF switch
malfunctions – any equipment that cannot
be controlled with the ON/OFF switch is
dangerous and must be repaired.
It is important that you read and understand
the instruction manual before use and
keep the manual in a safe place for future
reference. Safety information presented
here is generic in nature – some advice
may not be applicable to every piece of
equipment.
All safety precautions must be observed
to reduce the risk of personal injury when
operating the equipment.
The term “equipment” refers to your
product, be it electrical mains, battery or
petrol engine powered.
IMPORTANT – Handle the equipment safely
and carefully.
BEFORE USE - If you are not familiar
with the safe operation/handling of this
equipment, or are in any way unsure of any
aspect of suitability or correct use it for your
application, you should complete training
conducted by a person or organization
qualied in safe use and operation of this
equipment, including fuel/electrical handling
and safety.
WARNINGS
• Read all safety warnings and all
instructions. Failure to follow
warnings and instructions may result
in electric shock, fire and/or serious
injury.
• Never run a petrol engine in confined
areas.
• Do not operate the equipment in
flammable or explosive environments,
such as in the presence of flammable
liquids, gases or dust. Engine and
equipment may create sparks or heat
that may ignite vapors, dust etc
• Keep clear of moving parts.
• This equipment may be a potential
• source of electric shock if misused.
• Do not operate the equipment if it is
damaged, malfunctioning or is in an
excessively worn state.
• Do not allow others to use the
equipment unless they have read this
manual and are adequately trained.
• When using the equipment, basic
safety precautions detailed here must
always be followed to reduce the risk
of fire, electric shock, personal injury
and material damage.
• When wiring electrically powered
equipment, follow all electrical and
safety codes.
• Ensure all power sources conform to
equipment voltage requirements and
are disconnected before connecting
equipment.
You Can be
INJURED if you do not
follow instructions or
equipment damage
may occur.
You CAN be KILLED or
SERIOUSLY INJURED if
you do not follow
instructions.
You WILL be KILLED or
SERIOUSLY INJURED
if you do not follow
instructions.
