Boland BVB4K-55 Bedienungsanleitung

User Manual

1 of 23

High-Definition Serial Digital Interface

Multi Format 4K LCD Monitor

User Manual

BVB4K-55

User Manual

2 of 23

CAUTION ...................................................................................................................................................... 4

FEATURES ................................................................................................................................................... 6

CONTROLS, INDICATORS AND CONNECTIONS ..................................................................................... 7

BVB4K-55 FRONT....................................................................................................................................... 7

BVB4K-55 REAR......................................................................................................................................... 7

FRONT KEYS OPERATIONS ........................................................................................................................... 8

REAR PANEL .............................................................................................................................................. 9

MENU BASIC OPERATION ....................................................................................................................... 10

TO SHOW AND REMOVE THE MENU.............................................................................................................. 10

TO GO TO THE NEXT LEVEL.......................................................................................................................... 10

TO GO BACK TO THE PREVIOUS LEVEL.......................................................................................................... 10

TYPICAL MENU OPERATION ........................................................................................................................ 10

TURNING ON THE MONITOR........................................................................................................................ 10

VOLUME ADJUSTMENT................................................................................................................................ 10

HOW TO SELECT VIDEO SOURCE BY OSD................................................................................................... 11

PICTURE MENU ......................................................................................................................................... 12

ADJUST ..................................................................................................................................................... 12

COLOR TEMPERATURE CONTROL................................................................................................................ 12

ASPECT RATIO........................................................................................................................................... 12

PICTURE OPTION........................................................................................................................................ 13

PEAKING FILTER......................................................................................................................................... 13

AUDIO MENU ............................................................................................................................................. 14

SDI GROUP/CHANNEL................................................................................................................................ 14

VOLUME .................................................................................................................................................... 14

DISPLAY MENU ......................................................................................................................................... 15

MARKER .................................................................................................................................................... 15

LEVEL METER ............................................................................................................................................ 15

TIME CODE................................................................................................................................................ 16

OSD SET .................................................................................................................................................. 16

U.M.D....................................................................................................................................................... 16

CAPTION.................................................................................................................................................... 17

VIDEO RANGE............................................................................................................................................ 17

REMOTE MENU.......................................................................................................................................... 18

GPI CONTROL &GPI#............................................................................................................................... 18

SETUP MENU............................................................................................................................................. 19

FACTORY DEFAULT .................................................................................................................................... 19

FUNCTION SWITCH..................................................................................................................................... 19

CONTROL................................................................................................................................................... 20

COMMUNICATION........................................................................................................................................ 20

IP CONFIG ................................................................................................................................................. 20

FAN CONTROL ........................................................................................................................................... 20

INFO MENU ................................................................................................................................................ 21

FACTORY MENU........................................................................................................................................ 21

FACTORY MODE MENU ENTRY ..................................................................................................................... 21

User Manual

3 of 23

COLOR CONTROL....................................................................................................................................... 21

RESET....................................................................................................................................................... 22

DOWNLOAD................................................................................................................................................ 22

VERSION.................................................................................................................................................... 22

INPUT SUPPORT MODE............................................................................................................................ 23

SUPPORT SIGNALS..................................................................................................................................... 23

SUPPORT TIMINGS ..................................................................................................................................... 23

MECHANICAL DIMENSION....................................................................................................................... 23

BVB4K-55 ................................................................................................................................................ 23

User Manual

4 of 23

Caution

Before operating the set, please read this manual carefully.

WARNING:

To reduce the risk of electric shock does not remove cover (or back). No user serviceable parts inside.

Refer servicing to qualified service personnel. To prevent fire or shock hazard, do not expose the rear of

the set to rain or moisture. Do not rub or strike the Active Matrix LCD with anything hard as this may

scratch, mark, or damage the Active Matrix LCD permanently.

Unauthorized tampering with the inside of the monitor invalidates the warranty.

The manufacturer shall not warrant for any damage caused by improper maintenance and/or repair. Work

by third parties.

Important safeguards for you and your new product:

Your product has been manufactured and tested with your safety in mind. However, improper use can

result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built

into your new product, please read and observe the following safety points when installing and using your

new product and save them for future reference.

Read Instructions

Follow Instructions

All operating and use instructions should be followed.

Retain Instructions

The safety and operating instructions should be retained for future reference.

Heed Warnings

All warnings on the product and in the operating instructions should be adhered to.

Cleaning

Disconnect the unit from the electricity supply before cleaning. Do not use abrasive cleaners. Use a damp

cloth for cleaning.

Water and Moisture

Do not use this apparatus near water.

Transporting Product

A product and cart combination should be moved with care. Quick stops, excessive force and uneven

surfaces may cause the product and cart combination to overturn.

Attachments

Do not use attachments not recommended by Boland as they may cause hazards.

Ventilation

Do not block any of the ventilation openings.

Install in accordance with the manufacturer’s instructions.

Power Sources

This product should be operated only from the type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, consult your supplying dealer.

Power Lead Polarization

This product is equipped with a three-wire grounding-type cord. This is a safety feature. Do not defeat the

safety purpose of the grounding-type cord.

Power Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords at plugs, convenience receptacles and

the point where they exit from the product.

Outdoor Cable Grounding

User Manual

5 of 23

Caution

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is

grounded so as to provide some protection against voltage surges and built-up static charges. A “face

plate” also needs to be installed with an isolating capacitor to prevent any damage from static.

Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will

prevent possible damage to the product due to lightning and power-line surges.

Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to avoid contact with such power lines or circuits, as

contact with them might be fatal.

Earthing the product

This product must be earthed properly to comply with the safety regulations in the country of use. If you

are unsure of these regulations, please consult a qualified electrician.

Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltages or other hazards. Refer all servicing to qualified service personnel. If the Set does not

operate properly, switch it off and call your dealer.

Damage Requiring Service

Isolate this product from the mains supply and refer servicing to qualified service personnel under the

following conditions:

If the power-supply cord or plug is damaged.

If the glass front has been damaged.

If there is ingress of water between the glass and the LCD screen.

If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions as an improper adjustment of other controls

may result in damage and will often require extensive work by a qualified technician to restore the

product to its normal operation.

If the product has been dropped or the cabinet has been damaged.

If the product exhibits a distinct change in performance.

Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating condition and the front seal is intact.

Mounting

The product should be mounted on a wall only as recommended in the instructions.

Power

This set operates on an AC supply; the voltage is as indicated on the label on the Manual. This appliance

must be earthed at all times through the chassis as well as through the power lead.

User Manual

6 of 23

Features

This product is the multi-format Digital LCD Panel to display various kinds of digital video input signal as

12G/HD/SD-SDI//HDMI Digital.

This is also High Definition Broadcasting Monitor which can make it available to do output of stable video

signal with the menu of considering convenient user interface and the easy control for brightness and

color, and by EQ function of HD-SDI input part.

•4K includes 2x input / 2x output (Not Supported Dual link/ SD Timing)

•Quad Link Display (Square Division, 2 Sample interleave)

•HDMI input accepts up to 2160p 1x port (Not Supported 4:2:0 Color Format)

•HDMI 2.0 support (Not supported HDCP)

•ETHERBET (System Control) / Firmware Upgrade

•3D LUT

•Color Temperature –User, VAR, 9300K, 6500K, 5400K, 3200K

•USB Firmware Upgrade

•16 ch Audio Lever Meter Display. (SDI only)

- Lever Meter Position display selectable

•Focus Assist / Peaking filter

•Time code

•H / V Flip

•H / V Delay

•Marker

•Aspect Ratio

•Over Scan/Zero Scan/Under Scan/Pixel to Pixel

•Auto Calibration

: CA-210, CA-310 (Minolta), K-10 (Klein)

• Supported External GPI Control (RJ-45).

•UMD

• Supported RS-232C, RS-422.

User Manual

7 of 23

Controls, Indicators and Connections

BVB4K-55 Front

HDMI

QUAD

SDI 2

SDI 1

2SI

◀

ADJUST

MENU▼

▲

INPUT▶

HEADPHONE

(Power)

BVB4K-55 Rear

SDI 4 OUT

HDMI IN

SDI 3 OUT

SDI 2 IN

SDI 2 OUT

SDI 3 IN

SDI 4 IN

SDI 1 IN

RS422 OUT

ETHERNET

GPI

USB

RS422 IN

SPEAKER

RS-232C

SDI 1 OUT

DC 24V

User Manual

8 of 23

Controls, Indicators and Connections

Front Keys Operations

(Power)

Power ON/OFF Button.

SDI 1 / SDI 2 Input

Select SDI 1/ SDI 2 input signal.

QUAD

Select QUAD-SDI input signal.

2SI

Select 2-SAMPLEINT-SDI input signal.

HDMI

Select HDMI input signal

FUNCTION 1 ~ 5

Executes functions of user selected

(Undefined, Aspect, Color Only, Level Meter, Audio Group, Audio Channel, Audio mute, H/V Delay, Scan,

Flip, Marker on/off, Aspect/Area Marker, Gamma Select)

MENU ▼(Down)

Activates main OSD menu

Navigates higher menu in main OSD menu

▲ (Up)

Executes function (by OSD help commands) in main OSD menu

Navigates higher menu in main OSD menu



◀

(Left)

Decreases sound volume of speaker

Decreases values of user menu in main OSD menu

Executes function (by OSD help commands) in main OSD menu

Exits OSD menu

INPUT

▶

(Right)

Increases sound volume of speaker.

Increases values of user menu in main OSD menu

Executes function (by OSD help commands) in main OSD menu

Activates OSD menu of input source selecting

Changes input source by selecting

ADJUST

Adjust Picture Menu (Volume ->Backlight Adjust ->Brightness -> Contrast -> Color -> Tint ->

Sharpness)

Turn Right (with ‘Right’ button is same)

Turn Left (with ‘Left’ button is same)

User Manual

9 of 23

Controls, Indicators and Connections

REAR Panel

SDI 1/SDI 2 IN_OUT

12G/HD SDI / SD SDI Input_ Loop Out

SDI 3/SDI 4 IN

SDI 3, SDI 4 Only Quad Input

SDI 3/4 OUT

SDI 3/4 Loop Out

HDMI

High Definition Multimedia Input

RS-232C

Auto color calibration

USB

Firmware Upgrade

GPI

GPI 1 ~ 7 Control Port

ETHERNET

Network System Control/ Firmware Upgrade

RS422 IN/OUT

Monitor System Control

DC 24V IN

PIN NO

Description

1,2

GND

4,5

+ 24V

User Manual

10 of 23

MENU Basic Operation

In this menu system, there are several ways to customize the menu settings provided.

Most menus consist of three levels to set up the options, but some require greater depth for the variety of

settings. If you press the MENU button, only the first and second level of the menu system will appear on

the monitor screen. The third level can be displayed by pressing INPUT

▶

. If a menu has more than three

levels, the pop-up dialogue box will be displayed as the fourth or fifth level.

To show and remove the Menu

Press the MENU button to display the menu. A second press of the MENU button will take you back to

monitor viewing.

To go to the next level

Press INPUT

▶

button.

To go back to the previous level

Press

◀(Left)

button

Typical Menu Operation

1. Press MENU button: The main menu will appear.

2. Use UP/DOWN button to select the desired menu option (icon).

3. While the desired menu option is selected, press INPUT to move to the second level.

4. Use UP/DOWN button to select the second menu option.

5. Press INPUT to move to the third level: Some menu options require additional steps.

6. Press MENU to return to the previous menu to return to monitor viewing.

Turning On the Monitor

1. First, connect power cord correctly. At this moment, the monitor switches to standby or power on mode.

In standby mode, in order to turn monitor on, press the Power button.

2. Select the viewing source by using INPUT button on Keypad in front of monitor

Volume Adjustment

1. Press the ADJUST button on Keypad.

2. If you want to switch the sound off, press the FUNCTION (Audio mute) button.

3. You can cancel this function by pressing the FUNCTION (Audio mute) or volume control button.

Inhaltsverzeichnis

Andere Boland Monitor Handbücher

Boland

Boland LVB32 Bedienungsanleitung

Boland

Boland BVB4K-65 Bedienungsanleitung

Boland

Boland BVB4K-24 Bedienungsanleitung

Boland

Boland BVB4K-31 Bedienungsanleitung

Boland

Boland viewport v084a Bedienungsanleitung

Boland

Boland TP Series Bedienungsanleitung

Boland

Boland 4K49aHDR5 Bedienungsanleitung

Boland

Boland 6.5"- DHD65DB & LED Bedienungsanleitung

Boland

Boland BVB07 Bedienungsanleitung

Boland

Boland ViewPort d084c Bedienungsanleitung

Boland

Boland BVB Series Bedienungsanleitung

Boland

Boland PVB17 Bedienungsanleitung

Boland

Boland VIEWPORT v4x4b Bedienungsanleitung

Boland

Boland v056 Bedienungsanleitung

Boland

Boland Vp Series Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung