BOOCAX Penguin PG01 Bedienungsanleitung
Penguin PG01
Plasma Air Disinfection Robot
Product Manual
V 1.0.1
BooCaX Technology Co; Ltd
400 -161- 8661
Better Robot, Better Life
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 1/26 www.boocax.com
Safety and Precautions
The use of plasma air sterilizing robot shall follow the operation instructions. Use beyond the
range is prohibited!
BooCax will not assume any responsibilities for the losses caused by improper operation .
01/ Safety instructions for the use of robots
1 ) The following acts are prohibited
1Do not use the robot in flammable gas and similar dangerous environments；
2Do not throw any foreign objects into the cabin；
3Do not perform unnecessary operations such as cleaning and maintenance when the
robot is turned on；
4Do not disassemble the robot for repair or debugging；
5Do not touch the circuit terminals when the robot is charging；
6Do not replace any parts. If necessary, please do so under the direction of BooCax .
2 ) Safety instructions For Use
1The robot should be parked in a flat and solid place at normal temperature ;
2If there is odor or abnormal noise DURING DISINFECTING, please immediately turn off
the power of robot and report it to the after-sale service ;
3Before starting the robot, please check whether the safety components (sensor,
emergency stop switch, etc.) are in normal conditions;
4If the floor is waterlogged and greasy, please clean the floor promptly ;
5The robot body must be maintained by a trained professional ;
6Before using the machine, please install the outlet grille, filter screen and inlet grille in
place;
02 / Robot Daily Maintenance Instructions
When cleaning the robot fan, please make sure that the robot is turned off, the ventilation
grille is removed, and the power supply is unplugged or away from the charging station!
Otherwise, electric shock or serious malfunction may result.
It is strictly forbidden to use tap water to directly flush the robot and charging pile, which
may cause the accumulation of water vapor or water in the device, resulting in serious and
irreparable failures.
1) Cleaning
1Regularly use wet paper towel to clean the dust on the fan;
2Regularly use a brush to clean the surface of the driving wheel and universal wheel of the
robot to remove foreign objects such as hair dust;
3Gently wipe the outer surfaces of the robot regularly with detergent and a lint-free cloth;
4Regularly contact the after-sales service for maintenance work such as oiling and
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 2/26 www.boocax.com
dustproofing of the shock-absorbing spring and universal wheel bearing;
5The LiDAR sensor is an expensive and precise part in the robot, and should be wiped
with a clean cloth on a regular basis. Do not use force or other cleaning agents to wipe it,
otherwise it will easily cause functional damage;
6When the robot is not in use for a long time, try to store it in a dry and cool place
indoors .
2) Check if the screws are loose
Shake the components lightly periodically to observe whether there is an abnormal sound
when the components are loosened with the shaking. All the screws of the robot have been
treated with anti-loosening treatment and are not easy to loosen. But for the sake of safety, in
case of looseness, please contact "BooCax Official After-sales Service Center" regularly.
03/ Disclaimer and other legal statements
BooCax Technology owns a number of patents related to atomization and disinfection
robots, which are not allowed to be used by any institution or individual.
The internal structure of the robot is very precise, and unauthorized disassembly can easily
affect safety. Except for the authorized personnel of BooCax Technology, no one shall
disassemble the robot without permission, otherwise the warranty qualification of the product
will be lost. For any damage, failure and property/personal damage caused by unauthorized
disassembly, BooCax Technology will not assume any responsibility. Determination of
unauthorized disassembly will be based on the anti-disassembly mark on the body of the
robot.
04/ After-sale Support
If you have any questions about maintenance and safety during the use of BooCax
atomization disinfection robot, you can contact us by phone / email as shown in this manual.
We are very willing to provide you with product related services.
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 3/26 www.boocax.com
目录
1. Overview
1.1. Disinfection principle ...............................................................................................................................4
1.2. Scope of application and object of action .........................................................................................4
1.3. Main bactericidal factors and their intensity..................................................................................... 4
1.4. Killing microorganism ............................................................................................................................. 4
1.5. Machine life..............................................................................................................................................4
1.6. Product advantages................................................................................................................................ 4
2. Product Features........................................................................................................................................ 5
3. Disinfection Effect......................................................................................................................................5
4. Product Specification................................................................................................................................6
5. Appearance Size.........................................................................................................................................8
6. Function Module........................................................................................................................................ 9
7. Preparation before use
7.1. QR code deployment ........................................................................................................................... 10
7.2 Clean up barriers .................................................................................................................................. 11
8. Assembly and use
8.1. Unpack & inpect items .........................................................................................................................12
8.2. Assembly robot......................................................................................................................................12
8.3. Download & install app ....................................................................................................................... 13
8.4. Start-up, registration ............................................................................................................................ 14
8.5. Connect robot ........................................................................................................................................ 16
8.6. Build the map......................................................................................................................................... 16
8.7. Deploy route...........................................................................................................................................17
8.8 Setting the air volume........................................................................................................................ 18
9 Set the scheduled startup time.............................................................................................................19
10. Start disinfection................................................................................................................................... 20
11. More function settings........................................................................................................................ 21
Appendix 1: Robot disinfection effect test report.............................................................23
Appendix 2：Robot qualification...........................................................................................24
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 4/26 www.boocax.com
1. Overview
BooCax Penguin PG01 plasma air sterilizing robot produces plasma rapidly by the air exchange
method can effectively purify the ambient air in the space; Because it does not produce harmful
substances, it can coexist with humans and machines. The robot has the autonomous movement
function can sterilize the environmental space at regular intervals and kill harmful microorganisms
and viruses in the air, thereby to achieve the purpose of self-cleaning space.
1.1. Disinfection principle
Through the rapid generation of plasma and the ventilation of fans, the effective purification of
the ambient air in the space is realized. Amino acids are prone to chemical reactions with active
particles in the plasma, oxidizing amino acids and destroying cell membranes. Active particles in
the body are the most fundamental cause of cell death.
1.2. Scope of application and object of action
It can be used for air disinfection in closed and non-closed space environments, and the effective
volume of a single disinfection up to 255m³, the maximum air exchange rate of the equipment
can reach 560m³/h.
1.3. Main bactericidal factors and their intensity
The plasma density is 1.65 × 1018/m³~9.10 × 1018 /m³
Plasma density represents the amount of plasma generated, and the unit is units/m³.
The higher the plasma density, the higher the disinfecting rate of the passing airKilling
microorganism category
Plasma is effective against harmful microorganisms and diseases such as Staphylococcus albicans
and natural bacteria in the air.
The poison has a strong killing effect, and the killing and inactivation can be completed in an
instant
1.4. Service life of the whole machine
The product is valid for 5 years.
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 5/26 www.boocax.com
1.5. Product Advantages
The BooCax PG01 plasma air disinfection robot can realize autonomous navigation, and can walk
autonomously to reach the designated area for full disinfection; it is controlled by App, which can
be controlled remotely, and the coexistence of man and machine; at the same time, it is simple to
deploy and easy to maintain and manage.
2. Product Features
①The fuselage is small and flexible, and is not restricted by the passage of space;
②The maximum ventilation volume is 560m³/h;
③High-efficiency plasma generator, which can realize "one-shot" air sterilization;
④Precise ozone controlled release
⑤App, button panel control, support two disinfection modes: timed and instant;
⑥ The disinfection log is automatically recorded for 120 days, and the log export is supported;
⑦With high-precision autonomous navigation function, it can independently set the working
area (room) and working time;
⑧ Support multi-area (room) and complex layout applications to ensure the uniformity and
consistency of disinfection;
⑨ With automatic obstacle detection and voice reminder function;
⑩ Support automatic charging, which can completely eliminate the trouble of line charging;
⑪Filter installation reminder, disinfection tasks will be prohibited when no filter is installed;
⑫Support fixed position use, support manual fixed point disinfection.
3. Disinfection Effect
In a confined space of about 20m³, the plasma air disinfection robot kills 120 minutes according
to the set program (minimum air exchange volume and plasma action time) under the condition
of no one indoors, and the killing rate of Staphylococcus albus is greater than 99.9%. The killing
rate of natural bacteria in the air is more than 90%.
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 6/26 www.boocax.com
4. Product Specification
Types Name Penguin PG01 Plasma Air Disinfection Robot
Basic
parameter
Model BKS-LTP-PG01
Application Using plasma technology to disinfect germs in the air,
remove odor, and remove formaldehyde
Appearance
size 407mm*421mm*611mm
Body weight 20kg
Performance
parameters
Circulating
air volume
Less than or equal to 560m³/h (3rd gear adjustable)
Applicable
space
30～255m³
Noise ≤65db，minimum gear45dB
Plasma
density
1.65
×
10
18
𝑚
−
3
~9.10
×
10
18
𝑚
−
3
Elimination
rate
Simulate the scene ≥99.9%，On-site natural
conditions≥90%
Notice
Wind speed gear Circulating air volume
m³/h
Noise dB
1st gear 200 45
2nd gear 360 55
3rd gear 560 65
Mobility
Movement
mode Autonomous path planning and auto-navigation
Moving
speed 0.3 m/s
Drive mode Differential drive
Obstacle
crossing
ability
≤10 mm
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 7/26 www.boocax.com
Gradeability ≤5°
Travel lane
width ≥600 mm
Power supply
capability
Continuous
running hours 6h
Charging
method Auto-charging
Charging
time 3h（0-80%）
Charging pile
Support 110V～240V wide voltage
input
Rated output: voltage 29.4V, current 5.0A
Safety and
Environment
Safety
protection visual obstacle avoidance
Bumper strip 1 group
Working
temperature 0°～50°
Ozone
concentratio
n
≤0.046PPM（Human-machine coexistence）
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 8/26 www.boocax.com
5. Appearance Size
Axonometric view
PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd. 9/26 www.boocax.com
6. Function Module
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere BOOCAX Robotik Handbücher
Beliebte Robotik Handbücher anderer Marken
STEMCenter USA
STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung
SunFounder
SunFounder PiDog Bedienungsanleitung
Universal Robots
Universal Robots UR5 Bedienungsanleitung
Universal Robots
Universal Robots E Series Bedienungsanleitung
YASKAWA
YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung
EFORT
EFORT ECR5 Gebrauchsanweisung
