Bora Universal recirculation unit 1 Bedienungsanleitung

UUE1UMEN-000

www.bora.com

Operating and installation instructions UUE1

Universal recirculation unit 1

Operating and installation instructions: Original Translation

Manufacturer

BORA Lüftungstechnik GmbH

Rosenheimer Str. 33

83064 Raubling

Germany

Contact

T +49 (0) 8035 / 907-240

F +49 (0) 8035 / 907-249

[email protected]

www.bora.com

The distribution and duplication of this document, as well as the use and disclosure of its contents are prohibited

unless expressly authorised.

www.bora.com

1 General 4

2 Safety 6

2.1 General safety instructions .................................6

2.2 Safety instructions – operation ...........................6

2.3 Intended use ....................................................... 6

3 Device description 8

3.1 Technical data..................................................... 8

3.2 Structure ............................................................. 8

3.3 Functional principle............................................. 8

4 Installation 9

4.1 Checking the scope of delivery ...........................9

4.2 Assembly instructions .........................................9

4.3 Installing the recirculation unit............................9

4.3.1 Installing the recirculation unit............................9

4.3.2 Replacing the Universal recirculation unit...........9

4.4 Handover to user................................................. 9

5 Cleaning and maintenance 10

5.1 Cleaning agents................................................. 10

5.2 Cleaning ............................................................10

6 Troubleshooting 11

7 Warranty, service and spare parts 12

7.1 Warranty............................................................12

7.2 Service ..............................................................12

7.3 Spare parts........................................................ 12

8 Decommissioning, disassembly and

disposal 13

8.1 Decommissioning..............................................13

8.2 Disassembly ......................................................13

8.3 Disposing of the product in an environmentally

friendly way....................................................... 13

9 Notes 14

Table of Contents

General

www.bora.com

1 General

Target group

These operating and assembly instructions are intended

for the following target groups:

Target group Requirements

Users The Device may be used by children

from the age of 8 as well as by people

with limited physical, sensory or mental

capabilities or a lack of experience and/or

knowledge, provided they are supervised,

have been instructed in the safe use of the

device and have understood the dangers

involved. Children must be supervised. All

safety and warning information and handling

instructions in the operating manual must

be followed.

Ambitious Diyers Ambitious Diyers may carry out all the

necessary carpentry and assembly work

themselves providing that they have the

necessary skills and knowledge. They must

not connect the current and gas themselves.

Assembly

expert

The assembly expert must carry out all the

necessary carpentry and assembly work

taking existing regulations into account.

The current and gas connections must be

approved for the system in use by a certified

electrician or gas engineer before use.

Electrical

expert

The electrical connection must only be

executed by a certified electrician. He/she

also assumes responsibility for the proper

electrical installation and commissioning.

Expert

gas connection

The gas connection must only be implemen-

ted by a certified gas engineer. He/she also

assumes responsibility for the proper gas

installation and commissioning.

Tab. 1.1 Target groups

INFO BORA Holding GmbH, BORA Vertriebs

GmbH & Co KG, BORA APAC Pty Ltd and BORA

Lüftungstechnik GmbH - hereinafter referred

to as BORA - shall not assume any liability for

damage caused by non-compliance with these

documents nor by improper assembly!

The electricity and gas connections must be

implemented by a certified engineer.

Assembly must only take place in compliance

with the applicable norms, regulations and

laws. All safety and warning information and

handling instructions in the operating and

assembly instructions must be followed.

Validity of the operating and assembly

instructions

This manual is valid for several versions of the device.

For this reason, it is possible that individual features are

described in the manual that do not apply to your device.

Other applicable documents

Additional documents are valid as well as these operating

and assembly instructions, and likewise need to be

observed.

Please observe all documents included in the scope of

delivery.

INFO BORA cannot assume any liability for damage

caused by non-compliance with these

documents!

Guidelines

These devices meet the following EC guidelines:

2004/108/EC EMC Directive

2006/95/EC Low-Voltage Directive

2009/125/EC Ecological Design Directive

2010/30/EC Energy label Directive

2011/65/EC RoHS Directive

Depiction of information

We used standard formatting, numbering, symbols, safety

instructions, terms and abbreviations so that you can

work quickly and safely when using this manual.

Instructions are marked with an arrow.

 Always perform all instructions in the prescribed order.

Enumerations are indicated with a square bullet point at

the start of the line.

 Enumeration 1

 Enumeration 2

INFO Information notes point to special features that

must be taken into account.

Safety and warning instructions

The safety and warning instructions in this manual are

emphasised with symbols and signal words.

Safety and warning instructions are structured as follows:

WARNING SYMBOL AND

SIGNAL WORD!

Type and source of the danger

Results of non-compliance

Measures to minimise risk

General

www.bora.com

Please note:

 The warning symbol draws your attention to the risk.

 The signal word indicates the severity of that risk.

Warning

symbol

Signal word Risk

Danger Indicates an immediate,

hazardous situation which

causes death or serious injury if

not respected.

Warning Indicates a potentially

hazardous situation which can

cause death or serious injury if

not respected.

Caution Indicates a possible

hazardous situation which

can cause minor injury if not

respected.

— Caution Indicates a situation which

can cause minor injury if not

respected.

Tab. 1.2 Meaning of the warning symbols and signal words

Safety

www.bora.com

2 Safety

2.1 General safety instructions

INFO The appliance complies with the

stipulated safety requirements. The

user is responsible for appliance

cleaning and maintenance as well as

its safe use. Improper use can lead

to personal injury and damage to

property.

 The operating and installation instructions

contain important information about

installation and operation. These enable you

to protect yourself against injuries and

prevent damage to the appliance. Contact

details for further information as well as

application and usage questions can be

found on the back of these operating and

installation instructions.

 The term ‘appliance’ is used for the

Universal recirculation unit 1 (UUE1) and

the Universal recirculation unit 3 (UUE3).

Read the operating and installation

instructions fully before using the appliance

for the first time.

Always store the operating and installation

instructions within easy reach so that they

can be accessed if required.

Pass the operating and installation

instructions to the next owner if you sell

the appliance.

Conduct all work extremely attentively and

conscientiously.

Check the appliance for visible damage

when unpacking it.

Do not connect a damaged appliance.

Only use the appliance once all installation

activities are complete. This is the only way

to ensure safe operation.

Keep pets away from the appliance.

Recirculation mode

INFO When cooking, additional moisture is

released into the ambient air.

INFO In recirculation mode, only a slight

amount of moisture is removed from

the cooking vapour.

When using recirculation mode, ensure a

sufficient supply of fresh air, e.g. by

opening a window.

Ensure a normal and comfortable room

climate (humidity of 45 – 60%), e.g. by

opening natural ventilation openings or

using domestic ventilation systems.

After every use in recirculation mode,

switch the cooktop extractor to a low level

for about 15 minutes or activate the

automatic after-run function.

Households with children and people with

special needs

The appliance can be used by children aged

8 and above as well as people with reduced

physical, sensory or mental capacities or a

lack of experience and/or knowledge if

they are supervised or have been instructed

how to safely use the appliance and

understand the resultant risks.

Supervise children in the vicinity of the

appliance.

Children must not play with the appliance.

Do not store any items that could be of

interest to children in storage spaces above

or behind the appliance. Children will

otherwise be encourage to climb on the

appliance.

Unauthorised modifications

Unauthorised modifications can cause the

appliance to pose risks.

Do not conduct any modifications to the

appliance.

Cleaning and maintenance

The activated charcoal filters must be

regularly replaced.

Dirty filters can lead to unpleasant odours

(see the Cleaning and maintenance section).

2.2 Safety instructions – operation

The appliance must only be used in

connection with a BORA cooktop extractor.

Please also see the BORA cooktop extractor

operating instructions in this regard.

2.3 Intended use

The appliance is only intended for use in

private households to reduce odours during

food preparation. It is not intended for:

Safety

www.bora.com

 Outdoor use

 Installation in vehicles

 Heating rooms

 Use in non-stationary installation sites

(e.g. on ships)

 Use with an external timer or a separate

remote control system (remote operation)

Any use other than that specified in these

operating and installation instructions or any

use that goes beyond that which is described

here is classed as unintended. BORA does not

assume any liability for damages caused by

improper use or incorrect operation.

All misuse is prohibited!

INFO BORA Holding GmbH, BORA Vertriebs

GmbH & Co KG, BORA APAC Pty Ltd

and BORA Lüftungstechnik GmbH do

not assume any liability for damage

arising from non-adherence to the

safety and warning information.

Device description

www.bora.com

3 Device description

 Observe all safety and warning information during

operation (see the Safety section).

The Universal recirculation unit 1 (UUE1) has the

following features:

 Activated charcoal foam

 Fine filter fleece

3.1 Technical data

Parameter Value

Weight (incl. accessories/packaging) Approx. 2.0 kg

Activated charcoal foam 1.0 kg

Housing material Plastic

Dimensions (width x depth x height)

Recirculation unit with plinth 330 x 450 x 94 mm

Inlet opening (exterior dimensions)

222 x 89 mm

Tab. 3.1 Technical data

3.2 Structure

23 1

Fig. 3.1 Recirculation unit 1 (UUE1)

[1] Activated charcoal foam

[2] Fine filter fleece

[3] Sealing lip

450

330

Fig. 3.2 Appliance dimensions (UUE1)

3.3 Functional principle

 The cooking vapours created are extracted at the

cooktop by the BORA cooktop extractor and fed into

the recirculation unit.

 Inside the filter, the cooking vapour is pre-filtered by

the fine filter fleece.

 Odour absorption takes place in the activated charcoal

foam.

 The purified air is then expelled.

Installation

www.bora.com

4 Installation

 Observe all safety and warning information (see the

Safety section).

 Follow the enclosed manufacturer’s information.

INFO The product must not be installed above

cooling devices, dishwashers, stoves, ovens,

washing machines or driers.

4.1 Checking the scope of delivery

Name Quantity

Recirculation unit 1 (UUE1) 1

Operating and installation instructions 1

Tab. 4.1 Scope of delivery

 Check the scope of delivery for damage and make sure

it is complete.

 If there are any missing or damaged parts, please

notify BORA After Sales Service.

 Do not under any circumstances install parts which are

damaged.

 Dispose of transport packaging in the proper manner

(see the Decommissioning and Disposal section).

4.2 Assembly instructions

 Keep the airflow channels as short as possible.

 Do not install the recirculation unit in floor units or

bodies with no separation from the doors or drawers

as the positive pressure could cause these to open of

their own accord.

 The drawers, back panels and shelves in the floor unit

must be removable for maintenance and cleaning

purposes.

 If the recirculation unit is installed in an adjacent room,

air recirculation must occur in the room in which the

vapour extraction system is installed so as not to

generate any low pressure.

4.3 Installing the recirculation unit

INFO A return flow aperture of > 500 cm2in the

plinth area must be provided for recirculation.

INFO The air duct diameter must be no less than

150 mm (176 cm2).

INFO With an air duct length of 50 cm, no corner or

bend should be installed before the fan module

(motor).

INFO Install straight duct pieces with a length of at

least 50 cm between the corners or bends.

4.3.1 Installing the recirculation unit

 Compressed tape is installed on the recirculation

unit’s internal connection to enable this to be securely

attached.

 Connect the duct with the recirculation unit’s ducting.

 Evenly push the recirculation unit onto the ducting.

 Remove the protective film from the Velcro fastener on

the outer side of the recirculation unit.

 Use the Velcro fastener to prevent the recirculation

unit from slipping.

 Stick the connections for the ducting sections to the

housing with an air tight join

 UDB25 sealing tape can also be used for air-tight

installation (not included in the scope of delivery). The

UDB25 sealing tape (Universal accessory UDB25) can

be obtained from your BORA distributor.

4.3.2 Replacing the Universal recirculation

unit

Switch off the cooktop extractor as shown in the BORA

cooktop extractor operating instructions.

 Open the revision option to access you appliance.

 Loosen the appliance with the angle brackets.

 Remove the appliance from the ducting.

 Clean the ducting with a soft cloth and detergent or

water.

 Install the replacement appliance as described in the

Installation section.

 Check that all the duct connections are tight and

secure.

 Check that the appliance functions correctly.

 Do this by putting the cooktop extractor into operation

as shown in the BORA cooktop extractor operating

instructions.

 Seal any possible leakages.

 Re-check the tightness of the connections.

 Seal the revision option.

 Properly dispose of the used filter.

4.4 Handover to user

Once installation is complete:

 Explain the main functions to the user.

 Explain all safety-related aspects of operation and

handling to the user.

 Provide the user with the accessories and the

operating and installation instructions for safe storage.

Cleaning and maintenance

www.bora.com

5 Cleaning and

maintenance

 Observe all safety and warning information (see the

Safety section).

 Follow the enclosed manufacturer’s information.

 When conducting scheduled cleaning and other work

on the appliance, ensure that the cooktop extractor is

fully switched off so as to prevent injury. For how to do

this, please see the BORA cooktop extractor operating

instructions.

 After every use, switch the cooktop extractor to a low

level for about 15 minutes or activate the automatic

after-run function.

 Adhere to the following replacement and service

cycles:

 In the event of odour formation

 Declining extraction performance

Component Replacement

cycle

Service

cycle

Recirculation unit 1 (UUE1) 1x per year

Recirculation unit 3 (UUE3)

Activated charcoal filter

Every 2 years

Tab. 5.1 Replacement and service cycles

 Contact your BORA specialist supplier or the BORA

After Sales Service to commission a service cycle to be

performed.

5.1 Cleaning agents

 Never use steam cleaners, abrasive sponges, scouring

pads or chemically aggressive cleaning agents (e.g.

oven cleaner spray).

 Make sure that the cleaning agent does not contain

any sand, soda, acids, lyes or chloride.

5.2 Cleaning

Users are not intended to clean the inside of the

appliance and must not do this under any circumstances.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere bora Wasserfiltersystem Handbücher

bora

bora UUE 3 Leitfaden

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung

bora Universal recirculation unit 1 Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken