3. Safety provisions
1. Works on the machine must only be conducted by professionally instructed
personnel. Observe the legal minimum age!
The warranty expires if damages occur due to improper handling.
2. We point out that we do not assume liability for damages that occur due to
non-compliance with this operating manual.
3. The machine operator must make sure that at least one copy of this operating
manual is kept in immediate vicinity to the machine and that it is accessible to
all persons working on the machine.
4. The operator must make sure that the safety information and the hazard
warnings on the machine are observed and that the signs are in legible
condition.
5. Never work without safety goggles.
6. Wear tight clothes and a hair net if you have long hair. Do not wear loose
clothing (ties, shirt sleeves, jewellery etc.).
7. Ear protection must be worn as of an emission sound pressure level of 80 dB
(A) in the workplace.
8. Never leave the machine running without supervision.
9. Categorically, no safety installations must be modified, disassembled or taken
out of commission. The safety installations prevent damages.
10.Secure the machine in a way so that it cannot be activated by children.
Persons not instructed must not activate the machine.
11.Make sure before using the machine that it is in proper condition. Shut down
the machine if any recognisable damage or defect impairing the safety has
occurred or if any unusual noises can be heard. Pay special attention to any
damages on the main plug or the electric connection. Never use the machine
with a defective, pinched or bare cable.
12.Insert the shock proof plug into a main socket suitable for the machine. The
supply line for the machine must only be connected to a isolated ground
receptacle. The main socket or the terminal box must have been installed by
an electrically qualified person beforehand.
13.The isolated ground receptacle must be close to the machine so that there is
no tensile load on the current-carrying cable.
14.Installation work must only be conducted with deactivated drive.
15.Do not reach into the running machine.
16.Always shut down the machine if you do not use it.
