Bosch VJR-A3-IC54 Bedienungsanleitung
IP-54 In-ceiling Mount
VJR-A3-IC54
en Mounting Guide
AutoDome Junior Table of Contents | en 3
Bosch Security Systems, Inc. Mounting Guide F.01U.201.538 | 1.0 | 2010.12
Table of Contents
1 Important Safety Instructions 4
2 Unpacking 6
2.1 Parts List 6
3 Installing a Recessed Mount 7
3.1 Description 7
3.1.1 Additional Requirements 9
3.1.2 Preparing the Ceiling for Installation 9
3.1.3 Installing the Camera to the Mounting Plate 15
4en | Important Safety Instructions AutoDome Junior
F.01U.201.538 | 1.0 | 2010.12 Mounting Guide Bosch Security Systems, Inc.
1 Important Safety Instructions
Read, follow, and retain all of the following safety instructions.
Heed all warnings on the unit and in the operating instructions
before operation.
1. Clean only with a dry cloth. Do not use liquid cleaners or
aerosol cleaners.
2. Do not install unit near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.
3. Do not block any ventilation openings.
4. Do not use the unit near water or expose to rain or
moisture. Never spill liquid of any kind on the unit.
5. Unplug the unit during lightning storms or when unused for
long periods.
6. Adjust only those controls specified in the operating
instructions.
7. Do not overload outlets and extension cords, as this can
cause fire or electrical shock.
8. Protect the plug and power cord from foot traffic or
pinching, at electrical outlets, and at its exit from the unit.
9. Operate the unit only from the type of power source
indicated on the label.
10. Unless qualified, do not attempt to service a damaged unit
yourself. Refer all servicing to qualified service personnel.
11. Use only replacement parts specified by the manufacturer.
12. Install in accordance with the manufacturer's instructions
in accordance with applicable local codes. Use only
attachments/accessories specified by the manufacturer.
Equipment change or modification could void the user's
guarantee or authorization agreement.
AutoDome Junior Important Safety Instructions | en 5
Bosch Security Systems, Inc. Mounting Guide F.01U.201.538 | 1.0 | 2010.12
You can view and print the full version of this Installation
Manual with Adobe Acrobat Reader, both provided on the
enclosed CD-ROM. This user guide is the intellectual property
of Bosch Security Systems; protected by copyright. Contact:
www.BoschSecurity.com
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as “Dangerous Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
if not avoided, this could result in property damage or risk of
damage to the unit.
6en | Unpacking AutoDome Junior
F.01U.201.538 | 1.0 | 2010.12 Mounting Guide Bosch Security Systems, Inc.
2 Unpacking
This equipment should be unpacked and handled with care. If
an item appears to have been damaged in shipment, notify the
shipper immediately.
Verify that all the parts listed in the Parts List below are
included. If any items are missing, notify your Bosch Security
Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to
transport the unit and must be used if returning the unit for
service. Save it for possible future use.
This installation should be made by qualified service personnel
and conform to the National Electrical Code and applicable
local codes.
2.1 Parts List
The following table lists the parts included with the VJR-A3-
IC54 AutoDome Junior IP54-rated In-ceiling mount kit:
Quantity Part
VJR-A3-JW Junction Box
3 – M4–.7 x 8 Phillips Pan Head Machine Screws
1 – #10–32 x 3/8 Phillips Pan Head Machine Screw
VJR-A3-IC54BK
1 – IP54-rated Mounting Bracket with Clamp Plate
4 – M4 x 16 Phillips Pan Head Machine Screws
4 – M3 x 10 Torx Screws
4 – O-rings, 3.97 mm I.D. by Ø1.78 mm
1 – White trim ring with 2 (two) M3 captive screws
1 – Black trim ring with 2 (two) M3 captive screws
1–MountingGuide
AutoDome Junior Installing a Recessed Mount | en 7
Bosch Security Systems, Inc. Mounting Guide F.01U.201.538 | 1.0 | 2010.12
3 Installing a Recessed Mount
3.1 Description
This chapter details how to recess mount the AutoDome Junior.
NOTICE!
The image sensors in modern cameras are highly sensitive and
require special care for proper performance and extended
lifetime. Follow the guidelines for optimum results with your
camera:
– Do not expose to direct sunlight or bright spotlights in
operating and nonoperating conditions.
– Avoid bright lights in the field of view of the camera. Bright
lights cause a “smearing” effect, which is visible as white
lines above and below the highlight. Prolonged exposure to
bright lights may cause bleaching of the sensor's color
filters. This will be visible as colored spots in the picture
and is irreversible.
8en | Installing a Recessed Mount AutoDome Junior
F.01U.201.538 | 1.0 | 2010.12 Mounting Guide Bosch Security Systems, Inc.
Mounting Assembly
The following illustrations shows the components of the recess
mount:
Figure 3.1 AutoDome Junior with IP54-rated In-ceiling Mount
1 VJR-A3-JW Junction Box
2 Mounting Bracket
3 AutoDome Junior Camera
4TrimSkirt
AutoDome Junior Installing a Recessed Mount | en 9
Bosch Security Systems, Inc. Mounting Guide F.01U.201.538 | 1.0 | 2010.12
3.1.1 Additional Requirements
– Appropriate straight slot screwdrivers
– No. 2 Phillips screwdriver
– Appropriate tool for cutting a hole in drywall or ceiling tile
(if applicable)
– T-10 Torx wrench
– Retaining ring with gasket
(supplied with AutoDome Junior camera kit)
– Three (3) M3 – .5 x 6 Phillips flat head machine screws for
use with the retaining ring
(supplied with AutoDome Junior camera kit)
– VJR-A3-SP, support kit for VJR-A3-IC54 mounting kit, if
mounting to a drop ceiling
3.1.2 Preparing the Ceiling for Installation
To mount to a recess mount, do the following:
1. Determine a secure location for the recessed mount.
Figure 3.2 Recess Mount Dimensions
229
(9.0)
145
(5.7)
70
(2.8)
mm
(in.)
10 en | Installing a Recessed Mount AutoDome Junior
F.01U.201.538 | 1.0 | 2010.12 Mounting Guide Bosch Security Systems, Inc.
2. Drill or cut a 200 mm hole with a tolerance of 2.2 mm ( 7.9
in. ± 1/8).
3. Optional: if installing the AutoDome Junior to a suspended
ceiling tile or any other surface where additional support is
required, the VJR-A3-SP mounting kit is recommended
(supplied separately).
4. Ensure that the gasket is attached to the retaining ring. If
the gasket and the retaining ring are separate:
a. Locate the flat side of the gasket and the recessed
side of the retaining ring.
b. Thread the flat side of the gasket (item 1, below) onto
the recessed side of the retaining ring (item 2). The
illustration below shows a cross-section of the gasket
on the retaining ring.
CAUTION!
You must ensure that the gasket is attached to the retaining
ring as shown above to ensure an environmentally tight seal.
Inhaltsverzeichnis
Andere Bosch Kamerazubehör Handbücher
Bosch
Bosch LTC 9385 Series Bedienungsanleitung
Bosch
Bosch High-Speed Positioning System Bedienungsanleitung
Bosch
Bosch D1218 Bedienungsanleitung
Bosch
Bosch UHO-HBPS Bedienungsanleitung
Bosch
Bosch PowerMore 250 Bedienungsanleitung
Bosch
Bosch UHI-SBG-0 Bedienungsanleitung
Bosch
Bosch PowerTube 500 Bedienungsanleitung
Bosch
Bosch BC630 Kurzanleitung
Bosch
Bosch GBA 36 V Professional 6.0Ah Hw-D Bedienungsanleitung
Bosch
Bosch FLEXIDOME VDA-WMT Bedienungsanleitung
Bosch
Bosch VEZ-A4-IC Bedienungsanleitung
Bosch
Bosch UPH-C495N-L8120 Bedienungsanleitung
Bosch
Bosch LTC 9312/00 Bedienungsanleitung
Bosch
Bosch UPH-C485N-L8120 Bedienungsanleitung
Bosch
Bosch LTC9316/00P Bedienungsanleitung
Bosch
Bosch VDA-PLEN-DOME Bedienungsanleitung
Bosch
Bosch PowerPack 400 Bedienungsanleitung
Bosch
Bosch TC9320 Bedienungsanleitung
Bosch
Bosch Rexroth HAB-7X Series Bedienungsanleitung
Bosch
Bosch HSG9583 Series Bedienungsanleitung
