Bosch CLIMATE 5000 VRF RDCI Series Bedienungsanleitung

6 720 862 466 (2017/05) GB

Before using your air conditioning system, please read this manual carefully and keep it for future reference.

CLIMATE 5000 VRF

Bosch VRF Intelligent Manager (Network Controller)

BVIM

Installation-user manual

Contents

1. SAFETY INFORMATION ................................................................................................................................................................3

2. ACCESSORIES ............................................................................................................................................................................3

3. BVIM GATEWAY CONTROLLER INSTRUCTIONS .............................................................................................................................. 4

4. SYSTEM INTRODUCTION .............................................................................................................................................................8

5. SETTINGS .................................................................................................................................................................................12

6. OPERATION INSTRUCTIONS .......................................................................................................................................................14

7. TROUBLESHOOTING .................................................................................................................................................................20

2 | Contents

6 720 862 466 (2017/05) CLIMATE 5000 VRF

1. SAFETY INFORMATION

The following contents are stated on the product and the operation manual, including usage, precautions against injury and property damage, and the methods of

using the product correctly and safely.After fully understanding the following contents (identiﬁers and icons), read the text body and observe the following rules.

■Identiﬁer description

Identiﬁer Meaning

Warning Means improper handling may lead to personal injury.

Caution Means improper handling may lead to personal injury or property damage.

■Icon description

lcon Meaning

Forbidden.

It indicates compulsory implementation. The compulsory subject-matter is indicated in the icon or by images or characters aside.

Warning

Delegate installation

■ Ensure qualiﬁed personnel install and maintain the equipment. Improper installation performed by the user without

permission may cause ﬁre, electric,shock, personal injury or water leakage.

■Be careful when handling the BVIM gateway. Improper installation or use may result in injury or property damage.

Usage Warning

Forbidden Do not spray ﬂammable aerosol to the BVIM gateway controller directly. Otherwise, ﬁre may occur.

Forbidden Do not operate with wet hands or let water enter the BVIM gateway controller. Otherwise, electric shock may occur.

2. ACCESSORIES

Table 2-1

Accessory Name Qty. Sharp Purpose

Owner’s & Installation Manual 1

Control box 1

Power line 1

Communication socket with 3 terminals 8

Communication socket with 6 terminals 1

One Button battery 1

Note:

As the product updates, this document will be changed without prior notice.

NOTE

CLIMATE 5000 VRF 6 720 862 466 (2017/05)

SAFETY INFORMATION |3

■Do not install where naked ﬂames are present;

■Ensure you don’t over tighten or press terminals when tightening. This may break the BVIM or cause over heating of the module.

Before carefully read this manual, do not connect the control system power, and do not do any installation work, until the preparation work has been done.

3. BVIM GATEWAY CONTROLLER INSTRUCTIONS

CAUTION

■Do not install near where has electromagnetic interference or network stations;

■Do not install near a place with any heat source and steam source or ﬂammable gas source, which will affect the operation of this product.

■Installation should comply with the local rules

■Ensure there is enough installation space and space to maintain the product.

3.1. BVIM Gateway controller structure

1) Front view of BVIM gateway controller (Unit: mm)

251

173

292.5

319

Fig.3-1

2) Side view of BVIM gateway controller (Unit: mm)

319±1

66.4±1

Fig.3-2

4 | BVIM GATEWAY CONTROLLER INSTRUCTIONS

6 720 862 466 (2017/05) CLIMATE 5000 VRF

3) Detailed drawing of installation holes (Unit: mm)

Installation precautions:

■Must be installed indoors, guarantee the gateway controller installation must be higher than the ground 50 cm;

■Install at a place where should not be affected by electromagnetic wave or dust;

■Avoid installing in a place of direct sunshine or heat source;

■Avoid installing in a place with high humidity;

■ Avoid installing in corrosive areas.

■If suspension installed, make sure put the communication termnal at the upper side.

Please install according to the above requirements, check installation environment before installation.

3.2. System framework speciﬁcation

Fig.3-4

BVIM gateway controller is used for querying and controlling the air-conditioning indoor unit, and transmits the status information of indoor unit to the computer and transmits the

controlling and querying orders sent by the computer to the indoor unit.

1) BVIM gateway controller indication instructions

LED indication

lamp

Main power

terminal

Power ON/OFF switch

B-net terminal

I/O terminal

LAN terminal

Console terminal

Fig.3-5

BVIM gateway has 8 B-net terminals, 1 LAN terminal, 8 B-net terminal indication lamps, 4 status display lamps (Power, Status, Alarm, and Modem) and power switch.

Connect to the central air-conditioning system through the B-net terminal, and connect the local area network or Internet network through LAN terminal. Computer or

other similar devices can visit BVIM WEB through browser and the local or remote control the devices.

5.5

R3.5

Fig.3-3

CLIMATE 5000 VRF 6 720 862 466 (2017/05)

BVIM GATEWAY CONTROLLER INSTRUCTIONS |5

NOTE

■Install the gateway at a side of B-net communicating bus, do not install it in the middle of the bus.

■Use 3-core shielding wire with 0.7mm2~1.0mm2 for wiring, details please refers to professionals.

2) Terminal ﬁgure

LAN terminal

Console terminal

I/O terminal

Fig.3-6

3) LED indication lamp instructions

Table.3-1

Indication lamp Color Indication lamp instructions

TX1~TX8 Yellow No.1-8 sending terminals indication lamp

RX1~RX8 Green No.1-8 receiving terminals indication lamp

Power Red Power indication lamp

Status Green Status indication lamp

Alarm Yellow Alarm indication lamp

Modem Green Reserve indication lamp

LED status:

■Under normal situation, Status lamp will ﬂash with 1HZ frequency, and Alarm lamp will be off;

■Under error situation, Status lamp will ﬂash with 1HZ frequency, and Alarm lamp will ﬂash with 1HZ frequency.

4) Speciﬁcation parameters of BVIM gateway controller

Table.3-2

Power speciﬁcation Voltage range Single phase AC 100~240V, 50/60 Hz

Consumed power Max.15W

Using conditions

Voltage ﬂuctuation Rated value ±10%

Ambient temp. -10~50°C

Ambient humidity 0~95%

Storage temp. -20~60°C

Capacity Insulated resistance When it is DC 500VM, it will over 50MQ

Weight 4.4kg

Colour of the cover Milky white

XYE

K1K2E

6 | BVIM GATEWAY CONTROLLER INSTRUCTIONS

6 720 862 466 (2017/05) CLIMATE 5000 VRF

5) Deﬁnitions for code switch as follow

Table.3-3

Gateway controller On Off (Factory state)

SW1-1 No power consumption function power consumption function

SW1-2 Dial code setting IP WEB setting IP

OFF

SW1-3 Manual topology Auto topology

SW1-4 Reserve

Note: Dial Code requires setting before powering on. Take off the cover to do this.

6) Button battery installation

Fig.3-7 Fig.3-8

NOTE

After adjusting the dial switch, ensure you install the battery provided in your pack. 5.2 Time setting.

7) IO terminal

Table.3-4

Gateway controller Base pin name Function deﬁnition

Pin1

1 2 3

Gateway controller error output;

Pin2

When the device operates normally, break off Pin1

and Pin2, close Pin2 and Pin3; when it is error, close

Pin1 and Pin2, break off Pin2 and Pin3.

Pin3 When it’s powered off, the device still output error.

Pin4 IN1 IN2 E

4 5 6

Emergency stop signal, this signal is input signal,

and if this signal is high-level (12~36VDC), then

means emergency stop; if this signal is low-level

(0~0.7VDC), then means normal.

Pin5 Reserve function

Pin6 Ground wire with emergency signal

8) Uninterruptible power supply (UPS BK650-CH optional)

Table.3-5

Requirements Performance

Capacity 650 VA/400 Watt

Voltage 220V±8%(Battery)

Control signal 50Hz±1Hz(Battery)

Note: When cut off the power please completely close the computer.

CLIMATE 5000 VRF 6 720 862 466 (2017/05)

BVIM GATEWAY CONTROLLER INSTRUCTIONS |7

4. SYSTEM INTRODUCTION

BVIM is a Central Air-conditioning multi-connected devices’ gateway which based on WEB, is an important part of Intelligent Manager system. Connect to Central

Air-conditioning devices through the B-net terminal. Allows you to connect multiple systems through the B net connector (B-net connector is XYE communication

terminals and K1K2E communication terminals); under the auto topology mode, it can connect 4 refrigerant systems at once (can insert 256 sets indoor units and 16

sets outdoor units); under the manual topology mode, it can connect16 refrigerant systems at once (can insert 256 sets indoor units and 64 sets outdoor units). The

operation methods of auto topology and manual topology please refer to Technical Manual. The appearance interface of BVIM gateway as follow displays:

4.1. BVIM Network

1) BVIM gateway can connect the local area network or Internet network through LAN terminal. BVIM network topology as follows Fig 4-1.

2) B-net terminals are listed in two rows, 1-4 are XYE terminals, 5-8 are K1K2E terminals. Computer or other similar devices can visit BVIM WEB through browser, and

then local or remote control the devices.

Fig.4-1

4.2. Models which could be inserted

1) Can freely insert all VRF models.

2) If mini VRF outdoor units are connected to BVIM, a separate power supply will be required.

3) Details refer to Technical Manual.

4.3. Base on WEB technology

BVIM is a gateway based on WEB technology, unrelated to computer or similar devices operation systems. BVIM insert into network then can browse the WEB page

through the browser of system platform, we suggest using IE (9.0 or above), Firefox (11.0 or above), Chrome (18.0 or above) or Safari (5.1 or above).

4.4. Local network connection

BVIM gateway can connect to the LAN network through switch. IP address of computer or similar devices must in the same subnet area as the IP address of BVIM

gateway.

4.4.1. IP conﬁguration

Default IP of gateway is 192.168.100.40, subnet cover code is 255.255.255.0. IP address of computer or similar devices should manual conﬁgure the statistic IP and

within the range of 192.168.100, subnet cover code should be 255.255.255.0. If the computer only has the BVIM network, then use the way of conﬁguring single IP;

if the computer also has the local network beside BVIM network, then use the way of conﬁguring several IP. Methods as follow (Take windows 7 system for example).

1) Conﬁgure single IP

Open the property dialogue box to conﬁgure the IP address and subnet cover code, for example: IP: 192.168.100.44, subnet cover code: 255.255.255.0.

8 | SYSTEM INTRODUCTION

6 720 862 466 (2017/05) CLIMATE 5000 VRF

Fig.4-2

After conﬁguration, click the “OK” button.

2) Conﬁgure several IP

Before conﬁguring several IP’s it needs to conﬁgure a statistic IP address, conﬁguring steps as follow:

■Check the local IP

Open the property dialogue box, as Fig.4-2 display, if the option “Use the following IP addresses(S)” has been selected, and the interface displayed IP address,

that means the local IP is static IP address.Otherwise it is a dynamic IP address, then it needs to conﬁgure a static IP address.

■Conﬁgure static IP address

Open the “Start” menu, and type “cmd” in the search column, and display the dialogue box as follow:

Fig.4-3

Type “ipconﬁg” in the above ﬁgure, then the interface will display the local dynamic IP address, and it will write this IP address into the property dialogue box, and ﬁnish

the statistic IP address conﬁguration, details please consult the local network administrator.

After the static IP address conﬁguration is complete, open the property dialogue box again, select the “Advanced”, and display the TCP/IP setting dialogue box as

follow:

CLIMATE 5000 VRF 6 720 862 466 (2017/05)

SYSTEM INTRODUCTION |9

Fig.4-4

Click the “ADD” button under IP address column, and add a IP address with the same network segment of “192.168.100.40”, such as IP: 192.168.100.101, sub

network cover code: 255.255.255.0, and click “OK” button.

4.4.2. Local LAN access

If there is a computer or other similar device of same subnet area as BVIM in LAN, then type the link address of BVIM gateway (e.g.: http://192.168.100.40) on the

browser address bar can visit the BVIM WEB interface to operate the air-conditioning device. The local visit topology structure as follow display:

Fig.4-5

4.5. Remote network connection

Under the following situation, BVIM gateway can set in the ofﬁce network; the user can operate the air-conditioning device through the computer or similar devices.

VPN:

Only VPN use is allowed to access from internet.

■Router establishing

BVIM gateway might use a same public IP address with other devices, under the situation of network cannot send terminal mapping to BVIM gateway, and then can

use VPN for visiting. As the ﬁgure displayed, VPN tunnels establish between routers, and then can visit WEB interface through VPN tunnels. VPN Server can be

established by oneself also can be rented.

Fig.4-6

Its topology structure as follow display:

10 | SYSTEM INTRODUCTION

6 720 862 466 (2017/05) CLIMATE 5000 VRF

Andere Handbücher für CLIMATE 5000 VRF RDCI Series

Inhaltsverzeichnis

Andere Bosch Controller Handbücher

Bosch

Bosch Rexroth IndraControl L45 Technisches Handbuch

Bosch

Bosch REXROTH SB356 Bedienungsanleitung

Bosch

Bosch ARC R-1 Betriebsanleitung

Bosch

Bosch GAL 18V-160 C Professional Bedienungsanleitung

Bosch

Bosch Rexroth IndraDrive CsDrive System with HCS01 Bedienungsanleitung

Bosch

Bosch FW 100 Montageanleitung

Bosch

Bosch Rexroth VT-HNC100 3X/S Series Gebrauchsanweisung

Bosch

Bosch PXI-CORE Edge controller Bedienungsanleitung

Bosch

Bosch EasyControl CT200B Bedienungsanleitung

Bosch

Bosch CRC200 Bedienungsanleitung

Bosch

Bosch KJR-120C1/BTF-E Betriebsanleitung

Bosch

Bosch APC-AMC2-4R4CF Bedienungsanleitung

Bosch

Bosch REG 73-1 Bedienungsanleitung

Bosch

Bosch CS 550 Bedienungsanleitung

Bosch

Bosch E2800 Bedienungsanleitung

Bosch

Bosch FW 200 Bedienungsanleitung

Bosch

Bosch rexroth CytroForce-M Bedienungsanleitung

Bosch

Bosch Rexroth lndraDrive HCS02 Series Bedienungsanleitung

Bosch

Bosch D1255TD Bedienungsanleitung

Bosch

Bosch 2600 Series Bedienungsanleitung

Bosch

Bosch CR 10H Bedienungsanleitung

Bosch

Bosch EasyControl CT200 Bedienungsanleitung

Bosch

Bosch ACC MT Bedienungsanleitung

Bosch

Bosch APC-AMC2-4R4CF Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch