Bosch PCW915B90A Bedienungsanleitung

Carl-Wery-Straße 34

81739 München

Robert Bosch Hausgeräte GmbH

www.bosch-home.com

This cooktop is for use with Natural Gas and Universal LPG

PCW915B90A

Cod. 9000581463 A

Content

Safety considerations . . . . . . . . . . . . . . . . 5

For your safety . . . . . . . . . . . . . . . . . . . . . . . 5

What to do if you smell gas . . . . . . . . . . . . . . 5

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation . . . . . . . . . . . . . . . . . . . . . . . . . 7

Statutory requirements . . . . . . . . . . . . . . . . . . 7

Preparing to install . . . . . . . . . . . . . . . . . . . . . . . 7

Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installation of cooktop into the kitchen bench . . 9

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Conversion from Nat. Gas to Universal LPG . . 11

To change injectors . . . . . . . . . . . . . . . . . . . . 11

Changing the nozzles of the burners on the

cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjustment of the taps . . . . . . . . . . . . . . . . . 12

Operating instructions. . . . . . . . . . . . . . . . 14

Burner locations . . . . . . . . . . . . . . . . . . . . . . . . 14

The gas burners. Operation . . . . . . . . . . . . . . . 14

Switching on automatically . . . . . . . . . . . . . . . 15

Safety system . . . . . . . . . . . . . . . . . . . . . . . . . 15

Switching off a burner . . . . . . . . . . . . . . . . . . . 15

Power levels . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Suitable pans . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Additional wok pan support . . . . . . . . . . . . . . 17

Cooking recommendation . . . . . . . . . . . . . . . . 17

Precautions for use. . . . . . . . . . . . . . . . . . . . . . 19

Cleaning and maintenance . . . . . . . . . . . . . . 20

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Unsuitable products . . . . . . . . . . . . . . . . . . 20

Maintenance . . . . . . . . . . . . . . . . . . . . . . . 20

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . 22

Dear customer,

Congratulations on your choice and thank you for purchasing one of our appliances. This

practical, modern and functional appliance is manufactured using materials of the highest

quality which are subject to strict quality control checks throughout the entire manufacturing

process. The appliance is meticulously tested to ensure that it meets your demands and

produces perfect cooking results.

Do not remove the appliance from its protective packaging until it is installed in the unit.

Please read these instructions carefully before proceeding to install and use the appliance.

The information contained in these instructions is essential for the correct operation of the

appliance and, more importantly, for your safety.

The packaging of your appliance has been manufactured using only the materials which are

strictly necessary to guarantee efficient protection during transport.

These materials are 100% recyclable, thus reducing the environmental impact. You can also

contribute to caring for the environment, by following the advice below:

- dispose of the packaging in the appropriate recycling bin

- before you get rid of an old appliance, make sure you disable it. Contact your local authority

to find out the address of your nearest recycling centre to dispose of your appliance

- do not pour used oil down the sink. Collect it in a sealed container and take it to an

appropriate collection point or, failing that, place it in the rubbish bin (it will end up in a

controlled dump; this is probably not the best option, but it will avoid contaminating ground

water)

IMPORTANT:

In the unlikely event that the appliance should be damaged or not meet your expectations

in terms of quality, please inform us as soon as possible. For the warranty to be valid, the

appliance must not have been tampered with, or used inappropriately.

Safety considerations

For your safety If the information in this manual is not followed exactly, a

fire or explosion may result causing property damage,

personal injury or death.

Do not store articles on or against this appliance.

Do not store flammable material near this appliance.

Do not spray aerosols in the vicinity of this appliance

while it is in operation.

What to do if you

smell gas

Do not try to light the appliance.

Do not touch any electrical switch; do not use any phone

in your building.

Inmediately call your gas supplier from a neighbour’s

phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire

department.

Installation and service must be performed by an

authorised person.

Warnings DO NOT MODIFY THIS APPLIANCE.

Do not allow the flame to extend beyond the edge of the

cooking utensil. This instruction is based on safety

considerations.

Do not forget that the unit becomes hot when in use.

Common sense is important. Just because the flame is

out, does not mean parts cannot still be hot.

This appliance shall not be used for space heating. This

instruction is based on safety considerations.

Be sure to disconnect the electrical supply before

disassembly of the appliance.

Keep the appliance area clear and free from combustible

materials, gasoline and other flammable vapours and

liquids.

This appliance must be installed in a position with the

proper level of ventilation. Do not obstruct the flow of

combustion and ventilation air.

Cabinets installed above the gas cooktop must have a

minimum clearance of 650 mm (24”).

The gas pressure regulator supplied with the appliance

must be installed in line with the gas pipe. (N.G. only).

For pressure testing in excess of 3.5 kPa (1/2 psig) the

appliance and its individual shutoff valve must be

disconnected from the gas supply piping system.

Important. When using a very large pot, leave a gap of at

least 50 mm (2”) to avoid damaging any parts in bench

top wood, plastic or other non-heat resistant materials.

Never leave oil or hot fat unattended.

The surfaces on heating and cooking appliances get hot

when in use. Be careful. Keep children away from the

appliance.

Only use your appliance for the preparation of food and

never for room-heating purposes.

This appliance leaves the factory set for the gas supply

indicated on the data label. Call the Service Centre if it

needs to be altered.

Do not tamper inside the appliance. If necessary, call

your local Service Centre.

Overheated fat or oil can easily catch fire. Never leave the

appliance unattended when cooking food with fat or oil,

e.g. chips.

Never pour water on burning fat or oil. DANGER OF

BURNS! Cover the receptacle to smother the flames and

turn the cooktop off.

In the event of a fault, cut the gas and electricity supplies

to the appliance. Call our Service Centre to repair the

fault.

Do not use unstable or uneven-based receptacles on

cooking plates or burners. They may accidentally tip over.

If a gas supply knob/valve jams, do not force it. Call your

official Service Centre immediately for them to repair or

replace it.

The illustrations used in this booklet are only intended as

a guide.

Grids become very hot during use. When operating the

appliance control knobs, take care not to make contact

with the grids.

Do not use this appliance neither in marine craft nor in

caravans.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

Make sure you keep these instructions for use and

assembly in a safe place, so that you can hand them on

with the appliance if it ever changes owner.

Note: To avoid jeopardising the electrical safety of the

appliance, it is forbidden to use high-pressure or steam

jet cleaning devices.

SHOULD THE RELEVANT CONDITIONS NOT BE

PROPERLY SATISFIED, THE INSTALLER, AND NOT THE

MANUFACTURER, SHALL HELD LIABLE.

Installation

Statutory

requirements

This installation must conform with the following:

Ø Manufacturer’s Installation instructions

Ø Local Gas Fitting Regulations

Ø Municipal Building Codes,

Ø Refer to AS/NZS 5601.1 for Gas Installations.

Ø S.A.A. Wiring Code

Ø Local Electrical Regulations

Ø Any other statutory regulations

Preparing to install Refer to AS/NZS 5601.1 for piping size details. These

built-in cooktops are intended to be inserted in a

benchtop cutout.

Only an officially authorised technician should connect

the appliance.

Before you begin, turn off the gas and electricity supply.

Installation dimensions are shown in Fig.1.

Fig. 1

Before connecting the unit, check whether the local

connection conditions (type of gas) are compatible with

the unit’s setting. Observe any special conditions

imposed by local suppliers (utilities). The specifications

of this cooktop are stated on the data label located on the

bottom of the cooktop base.

A duplicate data label is supplied for adhesion to an

accessible location near the hotplate if the data label on

the base of the hotplate cannot be accessed when the

hotplate is installed.

Clearances A range hood fitted above the top must be installed

according to the installation instructions for the range

hood. A minimum distance of 650 mm is required for a

range hood and 750 mm for an exhaust fan.

Any adjoining wall surface situated within 200 mm from

the edge of any hob burner must be a suitable non-

combustible material for a height of 150 mm for the

entire length of the hob. Any combustible construction

above the hotplate must be at least 650 mm above the

top of the burner and no construction shall be within

450 mm above the top of the burner.

A minimum depth of 50 mm from the top of the worktop

surface must be provided for the appliance.

If the base of the hotplate can be touched, a protecting

shield must be fitted. This shield must be at least 10 mm

from the lowest part of the hotplate and must be capable

of withstanding the appliance temperatures. Minimum

thickness of benchtop is 30 mm. See Fig. 2.

If an oven is positioned below the cooktop the barrier

does not need to be fitted, but a space of 35 mm must

be maintained between the underside of the cooktop and

the top of the oven.

Fig. 2

Installation of cooktop

into the kitchen bench

Installation procedure:

Side clearances: If the distance measured from the

periphery of the nearest burner to any vertical surface is

less than 200 mm, the surface shall be protected in

accordance with clauses 6.10.1.2 of AS/NZS 5601.1

1. For cutout dimensions and clearances refer Fig.1.

2. The clips and the adhesive seal (underside of the

cooktop) are already fitted (depending on the model), do

not under any circumstances remove them. The seal

ensures that the entire work surface will be watertight,

and prevents water seepage. In order to fit the appliance

into the kitchen unit, first place the cooktop in the correct

position then loosen each of the clips so that they all turn

freely (it is not necessary to completely undo them).

Insert and centre the cooktop.

Press the sides of the cooktop until it is supported around

its entire perimeter.

Turn the clips and tighten them fully. Fig. 3.

Connection

Electrical An electrical 10 amp socket needs to be within 1 m of the

hotplate to allow electrical connection. The socket must

remain accessible after installation of the appliance.

Important note:

This appliance is connected to the mains (240 VAC) by

means of the connecting lead which must be fixed to the

ki tch en u ni t t o pr eve nt it f rom c om ing i nt o c on tac t wit h hot

parts of the cooktop (or an oven installed underneath)

and remain accessible after installation of the cooktop.

When making this connection make sure that the lead

cannot come into contact with hot parts of the cooktop.

Important: This appliance must be earthed. When

connecting the cooktop ensure that the earth wire is

connected first and that all wires are connected to the

correct terminals. Fig. 4.

Fig. 3.

Fig. 4

Gas

During the planning stage, consider the position of supply

connections.

The cooktop must be connected to the gas supply with

upstream connection of an isolation valve in accordance

with the respectively valid regulations. We recommend

that the isolation valve be fitted prior to the cooktop to

enable isolation of cooktop from gas supply. The valve

must be easily accessible at all times.

To find out the factory set gas type, see bottom of

cooktop next to gas connection.

Remove plastic cap from gas supply line prior to installation.

Fit regulator (N.G.) or a test point (Universal LPG) directly

to the R 1/2’’ connection as per Fig. 5. and Fig. 6.

Direction of gas flow is indicated on the rear of the regulator.

For position of the inlet connection refer Fig.1.

Use pipe compound or thread sealant, properly theaded

pipes and careful assembly procedure so that there is no

cross threading, etc., which might cause damage or

leakage.

Make sure that all connections peformed are free of

leakage.

The manufacturer does not accept any liability for

leakage on connections performed by the installer or if

the L-tube is moved or twisted.

There are two ways to carry out the connection to the

main gas line:

A. The hotplate can be connected with rigid pipe as

specified in AS/NZS 5601.1

B. Flexible Hose: If installing with a hose assembly, install

with a hose assembly that complies with AS/NZS 1869

(AGA Approved), 10 mm ID, class Bor D, no more than

1,2 m long and in accordance with AS/NZS 5601.1.

Ensure that the hose does not contact the hot surfaces of

the hotplate, oven, dishwasher or any other appliance that

may be installed underneath or next to the hotplate. The

hose should not be subjected to abrasion, kinking or

permanent deformation and should be able to be

inspected along its entire length with the cooktop in the

installed position. Unions compatible with the hose fittings

must be used and all connections tested for gas leaks.

Fig. 5 Fig. 6

The supply connection point shall be accessible with the

appliance installed.

WARNING: Ensure that the hose assembly is restrained

from accidental contact with the flue outlet of an

underbench oven.

Before Leaving- Check all connections for gas leaks with

soap and water. DO NOT use a naked flame for detecting

leaks. Ignite all burners both individually and concurrently

to ensure correct operation of gas valves, burners and

ignition. Turn gas taps to low flame position and observe

stability of the flame for each burner individually and all

together. Adhere the duplicate data plate to an

accessible location near the hotplate. When satisfied with

the hotplate, please instruct the user on the correct

method of operation. In case the appliance fails to

operate correctly after all checks have been carried out,

refer to the authorised service provider in your area.

It should be expressly noted that we cannot accept any

liability for direct or indirect damage caused by wrong

connection, leakage or improper installation. When being

repaired, the appliance must always be disconnected from

the mains supply; if required, notify our customer service.

Converting the

cooktop from Nat.

Gas to Universal LPG

To change injectors All work involved in installation, setting and adaptation to

a different gas type must be carried out by authorised

personnel from our Service Centre and must comply with

current regulations and the conditions laid down by the

local gas company.

Request change-over injectors from our customer service

deparment (refer injector chart below for sizes).

Before conversion the cooktop must be disconnected

from the electricity and gas valves must be turned to the

OFF position.

Natural Gas Universal LPG

Burner Hourly Gas

Consumption

(MJ)

Injector

mark

Hourly Gas

Consumption

(MJ)

Injector

mark

(mm)

Semi-rapid 6,50 118 6,00 67

Dual double

flame 85/140 46/71

18,00 18,00

Inhaltsverzeichnis

Andere Bosch Kochfeld Handbücher

Bosch

Bosch NGT73 Bedienungsanleitung

Bosch

Bosch PRS926B90E Bedienungsanleitung

Bosch

Bosch NET5054UC - 30" 500 Series Electric Cooktop Bedienungsanleitung

Bosch

Bosch Benchmark Series NETP066SUC Bedienungsanleitung

Bosch

Bosch PCD345DA Bedienungsanleitung

Bosch

Bosch AutoChef NET 8654 UC Bedienungsanleitung

Bosch

Bosch PKY475N14E/03 Bedienungsanleitung

Bosch

Bosch NIT8066UC Benutzerhandbuch

Bosch

Bosch PCQ715A90V Bedienungsanleitung

Bosch

Bosch NIT5665UC - Strips 500 36" Induction Cooktop Bedienungsanleitung

Bosch

Bosch NGM3450UC Bedienungsanleitung

Bosch

Bosch HGS7282UC - 30" Pro-Style Gas Range Handbuch

Bosch

Bosch NIT8065UC - Strips 800 30" Induction Cooktop Kurzanleitung

Bosch

Bosch NGM5056UC Bedienungsanleitung

Bosch

Bosch NET5654UC - 500 36" Electric Cookt Bedienungsanleitung

Bosch

Bosch PKD7 FP Series Bedienungsanleitung

Bosch

Bosch PKE6 Series Bedienungsanleitung

Bosch

Bosch NGM Series Bedienungsanleitung

Bosch

Bosch NEM 74 Series Bedienungsanleitung

Bosch

Bosch NET8054UC - 800 30" Electric Cookt Stücklistenhandbuch

Bosch

Bosch NES 730 UC Bedienungsanleitung

Bosch

Bosch NIT8665UC Bedienungsanleitung

Bosch

Bosch NGM5056UC Bedienungsanleitung

Bosch

Bosch PNW1E6V10I Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Bonnet

Bonnet OPTIMUM 700 Betriebsanleitung

Jenn-Air

Jenn-Air JGCP430 Bedienungsanleitung

Frigidaire

Frigidaire FES367FCC Kurzanleitung

Ztove

Ztove EZ2 DUO Bedienungsanleitung

Kleenmaid

Kleenmaid cooking GCTK9011 Installationsanleitung

Casselin

Casselin CSASRE24 Bedienungsanleitung

Jenn-Air

Jenn-Air JGC2536EB00 Bedienungsanleitung

Waldorf

Waldorf RN8603E-B Bedienungsanleitung

Whirlpool

Whirlpool SMP658CNEIXL Bedienungsanleitung

Wolf

Wolf CI243C/B Bedienungsanleitung

Fulgor Milano

Fulgor Milano F5PGK305S1 Bedienungsanleitung

GE JP389 Bedienungsanleitung

Wells

Wells WV-2HFG Bedienungsanleitung

IKEA

IKEA Lagan HGA4K Bedienungsanleitung

Samsung

Samsung NA36N9755 Bedienungsanleitung

Miele

Miele KM 404 Bedienungsanleitung

Lacor

Lacor 69562 Technisches Datenblatt

Keating Of Chicago

Keating Of Chicago MG-2 Bedienungsanleitung