CONTENTS
1 About this manual 1
2 General information 2
3 Installation of a complete new DECT6000 system 3
3.1 Tools 3
3.2 Introduction 3
3.3 Location and number of base stations 4
3.4 Location of the DCU 4
3.5 Configuration of the DCU 5
4 DECT6000 Control Unit (DCU) LBB 6721/00 6
4.1 Functional description 6
4.2 Controls and connectors 7
4.3 Installation 8
4.3.1 Mounting procedure 8
4.3.2 Hardware configuration of the DCU 8
4.3.3 Installing an ACU 8
4.3.4 Installing an extension card 8
4.3.5 Wiring 9
4.3.6 Software configuration of the DCU 9
5 Alphadesk central control PC 10
5.1 Functional description 10
5.2 Installation 11
5.2.1 Wiring the Alphadesk PC to the DCU
distance less than 3 m. 11
5.2.2 Wiring the Alphadesk PC to the DCU when
distance longer than 3 m. 12
6 Installing an Analogue Connection Unit (ACU)
LBB 6725/xx and LBB 6726/xx 13
6.1 Functional description 13
6.2 Connectors 14
6.3 Installation 15
6.3.1 Installing an ACU card into a DCU 15
6.3.2 Wiring ACU-PABX 17
6.3.3 Software configuration of the ACU 18
7 Base Station (BS) LBB 6730/01 19
7.1 Functional description 19
7.2 Connectors 20
7.3 Installation 21
7.3.1 Mounting procedure 21
7.3.2 Wiring 22
7.3.3 Software configuration of the base station 23
CONTENTS
en
Installation Instructions
DECT6000 T-1
9922 141 80271 03-07
