Bosch EX36N Bedienungsanleitung

MAN-36N-04

Precision Engineered Opto-Electronics™

EX36N

Day / Night Vision Camera

INSTALLATION INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep this instruction.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install

in accordance with manufacturer instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong is provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the power where they exit

from the apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in a way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

IMPORTANT

For best results, please read this Instruction Booklet prior

to installing the EX36N camera.

WARNING !

CSA Certified / UL Listed CLASS 2 power adaptors must

be used in order to comply with electrical safety standards.

This Product Has Been Certified By CSA International To

Include the Health Care Facility Requirements Of UL 2044.

Bosch Security Systems, Inc. will not be responsible for injuries

or damages resulting from the improper installation or use of any

product sold by Bosch Security Systems, Inc their agents,

distributors or dealers.

EU Directives covered by this declaration:

72/9/EC Low Voltage Directives

89/336/EEC Electromagnetic Compatibility Directive

NOTE: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to

part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. As part of its’

normal operation this device can generate radio

frequency energy and if not installed and used in

accordance with the installation manual may cause

interference to radio communications. However, there

is no guarantee that interference will not occur on a

particular installation. If the device does cause

interference to radio or television reception the user is

encouraged to try to correct the interference by one or

more of the following measures:

1) Fit Ferrite beads on all cable to and from the power

supply box, within the box walls.

2) Route the composite cable between the camera and

the power supply in steel conduit piping over the entire

run of the cable up to and including connection to a

deep conduit base fitted under the camera and a

conduit fitting adaptor in the wall of the PSU box.

3) Contact BOSCH Service Center for further advice.

INDEX – EX36

Page

Description.......................................................1

Unpacking........................................................2

Parts List..........................................................2

Items Required for Installation.........................2

Initial Preparations...........................................3

Guidelines........................................................3

Section 1. Faceplate Removal.......................4

Section 2. Input Power Connections .............7

Section 3. Mounting - Camera Housing ........9

Section 4. Camera –

Directional Adjustment...............12

Section 5. LEDs - Directional and

Power Adjustments.....................14

Section 6. Camera Re-Assembly ................16

Section 7. Troubleshooting – Camera.........18

Section 8. Troubleshooting – LEDs.............21

Section 9. General Specifications................23

DESCRIPTION

The EX36N Night Vision Camera has been

designed with tilt on its faceplate to allow corner

mounting and provide better view angle in small

rooms. The housing and faceplate consist of

tough materials to withstand damage in hostile

environments such as prison cells and

psychiatric wards.

The smooth compact housing allows for tight

installations without exposed wiring or mounting

screws, while separate windows for the camera

lens and LEDs result in a perfect picture without

light rebound.

A photocell circuit is used to provide automatic

on/off infrared operation.

The voltage regulator circuit allows for 12V dc or

24V ac operation, and a range in between, also

providing protection from voltage surges,

transient spikes, and reverse voltage.

UNPACKING

Care should be taken when unpacking the shipped

unit. Check the parts list and confirm all items have

been located. Inspect the equipment thoroughly to

ensure nothing was damaged in transit.

Contact BOSCH Service Center if a problem is

noted, see the rear page of this booklet for contact

numbers.

PARTS LIST (items supplied with unit)

- EX3x camera assembly

- Installation Instructions booklet

- Plastic bag containing one “security” Allen key

for removal of faceplate mounting screws

ITEMS REQUIRED FOR INSTALLATION

(not supplied with unit)

- Mounting hardware

- Mounting tools

INITIAL PREPARATIONS

Determine the operating voltage at the

installation site.

Determine the optimum location for the

camera. Section 3, Mounting-Camera

Housing.

All cameras have been tested prior to

shipment. After the wiring has been

reconnected, it is advisable to check the

camera’s operation before installation.

GUIDELINES

The installation of the EX36N camera is

explained in Sections 1 to 6 listed below.

It is important that these steps are followed in

sequence:

1. Faceplate Removal

2. Input Power Connections

3. Mounting - Camera Housing

4. Camera Directional Adjustment

5. LED Directional and Power Adjustments

6. Camera Re-Assembly

1. FACEPLATE REMOVAL

The faceplate must be removed prior to the

installation process. This is necessary because

the mounting holes need to be accessed. The

lens may need to have its directional angle

changed.

Refer to Figure 1-1 on page 5.

Step 1.1 - Place the camera housing on a flat

surface.

Step 1.2 - Use the supplied “security” Allen

wrench to remove the six screws

holding the faceplate into the

housing.

Step 1.3 - Remove the square foam cushion

attached to the camera lens.

Step 1.4 - Ensure the polycarbonate windows

in the faceplate are not scratched.

Inhaltsverzeichnis

Andere Bosch Digitalkamera Handbücher

Bosch

Bosch Blue Line A1 Series Bedienungsanleitung

Bosch

Bosch PS90 Montageanleitung

Bosch

Bosch AutoDome VG4-A-9230 Series Bedienungsanleitung

Bosch

Bosch MIC IP starlight 7000i Bedienungsanleitung

Bosch

Bosch AUTODOME IP 5000i Kurzanleitung

Bosch

Bosch MIC IP starlight 7000i Bedienungsanleitung

Bosch

Bosch AUTODOME 7100i Bedienungsanleitung

Bosch

Bosch AUTODOME 7100i Bedienungsanleitung

Bosch

Bosch MIC Series Bedienungsanleitung

Bosch

Bosch AN micro 1000 Bedienungsanleitung

Bosch

Bosch FLEXIDOME indoor 5100i Bedienungsanleitung

Bosch

Bosch MIC Series 440 Bedienungsanleitung

Bosch

Bosch FLEXIDOME panoramic 5100i Bedienungsanleitung

Bosch

Bosch DINION 4000 AN Benutzerhandbuch

Bosch

Bosch MIC IP ultra 7100i Bedienungsanleitung

Bosch

Bosch FLEXIDOME panoramic 5100i Bedienungsanleitung

Bosch

Bosch FLEXIDOME panoramic 5100i IR Bedienungsanleitung

Bosch

Bosch NBN-80052 Bedienungsanleitung

Bosch

Bosch MIC IP ultra 7100i Bedienungsanleitung

Bosch

Bosch AUTODOME inteox 7000i 2MP Bedienungsanleitung

Bosch

Bosch CameraPort CM-P 19 Bedienungsanleitung

Bosch

Bosch AUTODOME IP starlight 5000i IR Bedienungsanleitung

Bosch

Bosch MIC440AXWUD14636N Bedienungsanleitung

Bosch

Bosch MIC-7522-Z30GR Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung