Bosch IDP Referenzhandbuch

Technical Service Bulletin:

Evaporator Coil Replacement

Models: IDP (5 Ton) Heat Pump Units

Data subject to change without notice | BTC 761702118 A | 06.2022 Bosch Thermotechnology Corp.

www.bosch-thermotechnology.us 65 Grove Street Watertown, MA 02472 | Tel: 1-866-642-3198

Please read this entire document prior to proceeding with any work.

WARNING:

This bulletin is intended to provide technical guidance to a

professional who is qualiﬁed to work on heat pump products,

components, and refrigerant. If you are not qualiﬁed to work

on such equipment, please obtain the services of qualiﬁed

HVAC professionals.

WARNING: PERSONAL INJURY

The coil replacement procedure must not be undertaken

without ﬁrst removing all existing refrigerant from the

product.

If you have any questions regarding the information provided in this document,

please contact our Heat Pump Technical Support Team by phone at 1-800-283-

3787, or via email at [email protected]

CAUTION: PERSONAL INJURY, PRODUCT DAMAGE

This procedure requires two people and the use of a Coil

Replacement Support Bar (part# 8733957022, available

from Bosch at no charge) in order to be carried out safely.

Please do NOT attempt this procedure alone or without

obtaining the support bar and having it ready to use.

Evaporator Coil Replacement Procedure

1. Ensure that the unit is powered oﬀ and isolated from the electrical supply.

2. Reclaim all refrigerant (refer to installation manual for correct procedure).

3. Remove the 24 screws than run around the middle of all four sides of the

unit (Fig.1).

Figure 1

4. Remove the side panels (Fig.2).

Figure 2

Data subject to change without notice | Printed in the USA | BTC 761702118 A | 06.2022 Bosch Thermotechnology Corp.

Technical Service Bulletin

2 | IDP (5 ton) Heat Pump Units– Evaporator Coil Replacement

5. Heat and separate the brazed joints of the coil’s inlet and outlet connections

(Fig.3).

Figure 3

6. Remove 5 screws (Fig.4).

Figure 4

7. Remove 3 screws (Fig.5).

Figure 5

The following step REQUIRES two people in order to be carried out

safely, and will provide the clearance needed to physically remove the

existing coil.

8. Insert the coil replacemnent support bar in the following order.

a. 1st person - Lift the top section of the unit.

b. 2nd person - Insert temporary “coil replacement support bar” (Fig.6)

that will hold up the top section of the unit.

c. 1st person - Carefully lower the top section down onto the support bar.

Figure 6

9. Carefully remove the existing evaporator coil (Fig.7).

Figure 7

10. Remove the metal bracket from the existing evaporator coil (Fig. 8), and

install it on the new evaporator coil in the same location and orientation.

Data subject to change without notice | Printed in the USA | BTC 761702118 A | 06.2022 Bosch Thermotechnology Corp.

Technical Service Bulletin IDP (5 ton) Heat Pump Units– Evaporator Coil Replacement | 3

Figure 8

11. Pass a cable tie through the copper U-ends as close to the metal bracket

as possible, and gently tighten to bring the four rows of the evaporator

together securely (Fig.9).

Figure 9

12. Install the new evaporator coil into the unit, and secure the 5 screws in the

order shown in Fig.10. Remove the temporary support rod.

Figure 10

13. Using the correct procedure with nitrogen, braze the coil’s inlet and outlet

connections (Fig.11).

Figure 11

14. Evacuate and recharge the unit (refer to the installation manual for correct

speciﬁcations and procedure), reinstall all panels and screws, turn

the power back on to the unit and conduct a test run to ensure correct

operation.

Figure 12

Andere Bosch Wärmepumpe Handbücher

Bosch

Bosch BOVA Series Bedienungsanleitung

Bosch

Bosch Greensource CDi TW Series Bedienungsanleitung

Bosch

Bosch SM Split CS Series Bedienungsanleitung

Bosch

Bosch SM024 Bedienungsanleitung

Bosch

Bosch IDS BOVB20 Bedienungsanleitung

Bosch

Bosch Compress 7000 AWM/AWMS 5-17 Bedienungsanleitung

Bosch

Bosch Compress 7001i AW Bedienungsanleitung

Bosch

Bosch Compress 5800i AW Bedienungsanleitung

Bosch

Bosch BRB-36HWD1N1-M18 Bedienungsanleitung

Bosch

Bosch LM024 Bedienungsanleitung

Bosch

Bosch EP Series Handbuch

Bosch

Bosch ES025 Handbuch

Bosch

Bosch AD HP270-1 Bedienungsanleitung

Bosch

Bosch BCA Series Bedienungsanleitung

Bosch

Bosch Climate 6100i Montageanleitung

Bosch

Bosch LM024 Bedienungsanleitung

Bosch

Bosch MDCI20-3 Bedienungsanleitung

Bosch

Bosch IDS 2.0 Bedienungsanleitung

Bosch

Bosch CE025 Handbuch

Bosch

Bosch Compress Hybrid 7000i AW Montageanleitung

Bosch

Bosch BP Series Handbuch

Bosch

Bosch 15 SEER2 Series Bedienungsanleitung

Bosch

Bosch CA Bedienungsanleitung

Bosch

Bosch Compress Hybrid 7000i AW Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Panasonic

Panasonic WH-SDF03E3E5 Leitfaden

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung