Bosch IXO Bedienungsanleitung

Robert Bosch Power Tools GmbH

70538 Stuttgart

GERMANY

www.bosch-pt.com

1 609 92A 4W9 (2019.05) AS / 42

1 609 92A 4W9

en Original instructions

ar   

2 |

English .........................................................Page 7

 ........................................................ 21

................................................................ I

1 609 92A 4W9 | (07.06.2019) Bosch Power Tools

| 3

(1)

(2)

(3)

(6)

(4)

(8)

(5)

(10)

(9)

(7)

Bosch Power Tools 1 609 92A 4W9 | (07.06.2019)

4 |

(1)

(2)

(1)

(13)

(11)

(12)

1 609 92A 4W9 | (07.06.2019) Bosch Power Tools

| 5

(15)

(14)

(3)

Bosch Power Tools 1 609 92A 4W9 | (07.06.2019)

6 |

(16)

(3)

1 609 92A 4W9 | (07.06.2019) Bosch Power Tools

English | 7

English

Safety instructions

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions, illustra-

tions and specifications provided with this power

tool. Failure to follow all instructions listed below may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (cor-

ded) power tool or battery-operated (cordless) power tool.

Work area safety

uKeep work area clean and well lit. Cluttered or dark areas invite acci-

dents.

uDo not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

uKeep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical safety

uPower tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will reduce risk of electric

shock.

uAvoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased risk

of electric shock if your body is earthed or grounded.

uDo not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

Bosch Power Tools 1 609 92A 4W9 | (07.06.2019)

8 | English

uDo not abuse the cord. Never use the cord for carrying, pulling or un-

plugging the power tool. Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords increase the risk of elec-

tric shock.

uWhen operating a power tool outdoors, use an extension cord suit-

able for outdoor use. Use of a cord suitable for outdoor use reduces the

risk of electric shock.

uIf operating a power tool in a damp location is unavoidable, use a re-

sidual current device (RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Personal safety

uStay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication. A moment of inat-

tention while operating power tools may result in serious personal injury.

uUse personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid safety shoes, hard

hat or hearing protection used for appropriate conditions will reduce per-

sonal injuries.

uPrevent unintentional starting. Ensure the switch is in the off-posi-

tion before connecting to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch on invites acci-

dents.

uRemove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool

may result in personal injury.

uDo not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

uDress properly. Do not wear loose clothing or jewellery. Keep your

hair and clothing away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

uIf devices are provided for the connection of dust extraction and col-

lection facilities, ensure these are connected and properly used. Use

of dust collection can reduce dust-related hazards.

1 609 92A 4W9 | (07.06.2019) Bosch Power Tools

English | 9

uDo not let familiarity gained from frequent use of tools allow you to

become complacent and ignore tool safety principles. A careless ac-

tion can cause severe injury within a fraction of a second.

Power tool use and care

uDo not force the power tool. Use the correct power tool for your ap-

plication. The correct power tool will do the job better and safer at the

rate for which it was designed.

uDo not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous

and must be repaired.

uDisconnect the plug from the power source and/or remove the bat-

tery pack, if detachable, from the power tool before making any ad-

justments, changing accessories, or storing power tools. Such pre-

ventive safety measures reduce the risk of starting the power tool acci-

dentally.

uStore idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to oper-

ate the power tool. Power tools are dangerous in the hands of untrained

users.

uMaintain power tools and accessories. Check for misalignment or

binding of moving parts, breakage of parts and any other condition

that may affect the power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents are caused by poorly

maintained power tools.

uKeep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

uUse the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and

the work to be performed. Use of the power tool for operations differ-

ent from those intended could result in a hazardous situation.

uKeep handles and grasping surfaces dry, clean and free from oil and

grease. Slippery handles and grasping surfaces do not allow for safe

handling and control of the tool in unexpected situations.

Bosch Power Tools 1 609 92A 4W9 | (07.06.2019)

10 | English

Battery tool use and care

uRecharge only with the charger specified by the manufacturer. A

charger that is suitable for one type of battery pack may create a risk of

fire when used with another battery pack.

uUse power tools only with specifically designated battery packs. Use

of any other battery packs may create a risk of injury and fire.

uWhen battery pack is not in use, keep it away from other metal ob-

jects, like paper clips, coins, keys, nails, screws or other small metal

objects, that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

uUnder abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water. If li-

quid contacts eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

uDo not use a battery pack or tool that is damaged or modified. Dam-

aged or modified batteries may exhibit unpredictable behaviour resulting

in fire, explosion or risk of injury.

uDo not expose a battery pack or tool to fire or excessive temperat-

ure. Exposure to fire or temperature above 130°C may cause explosion.

uFollow all charging instructions and do not charge the battery pack

or tool outside the temperature range specified in the instructions.

Charging improperly or at temperatures outside the specified range may

damage the battery and increase the risk of fire.

Service

uHave your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the

power tool is maintained.

uNever service damaged battery packs. Service of battery packs should

only be performed by the manufacturer or authorized service providers.

Safety Warnings for Screwdrivers

uHold the power tool by insulated gripping surfaces, when performing

an operation where the fastener may contact hidden wiring. Fasten-

ers contacting a "live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

1 609 92A 4W9 | (07.06.2019) Bosch Power Tools

Andere Handbücher für IXO

Inhaltsverzeichnis

Sprachen:

Andere Bosch Akkuschrauber Handbücher

Bosch

Bosch EasyImpact 12 Bedienungsanleitung

Bosch

Bosch GWI 10,8 V-LI Professional Bedienungsanleitung

Bosch

Bosch PSR 960 Bedienungsanleitung

Bosch

Bosch C-EXACT 1 Bedienungsanleitung

Bosch

Bosch GDR Professional Series Bedienungsanleitung

Bosch

Bosch 0.601.9D9.000 Bedienungsanleitung

Bosch

Bosch Professional GSR 12 VET Bedienungsanleitung

Bosch

Bosch GSR 12 VE-2 Bedienungsanleitung

Bosch

Bosch Gsr professional 18 ve-2 li Bedienungsanleitung

Bosch

Bosch IXO Professional Bedienungsanleitung

Bosch

Bosch GSR/GSB 12 VE-2 PROFESSIONAL Bedienungsanleitung

Bosch

Bosch GFA18-H Bedienungsanleitung

Bosch

Bosch PSR 14.4-2 Bedienungsanleitung

Bosch

Bosch SG250 Montageanleitung

Bosch

Bosch GDR 10,8-LI Professional Bedienungsanleitung

Bosch

Bosch GSR Pro Drive Bedienungsanleitung

Bosch

Bosch GSR 10,8-2-LI Professional Bedienungsanleitung

Bosch

Bosch Professional GDR 18V-200 Bedienungsanleitung

Bosch

Bosch DL 0 607 453 4 Series Bedienungsanleitung

Bosch

Bosch EXACT ION Series Bedienungsanleitung

Bosch

Bosch GSR 14 Bedienungsanleitung

Bosch

Bosch GHO Professional 14 Bedienungsanleitung

Bosch

Bosch PSR 10,8 LI-2 Bedienungsanleitung

Bosch

Bosch IXO Bedienungsanleitung

Beliebte Akkuschrauber Handbücher anderer Marken

Makita

Makita DFT085F Bedienungsanleitung

Parkside

Parkside 345138 2004 Bedienungsanleitung

Makita

Makita DFL650F Bedienungsanleitung

AEG

AEG BST 18BLX2-0 Bedienungsanleitung

Ingersoll-Rand

Ingersoll-Rand D5000 Series Bedienungsanleitung

BGS technic

BGS technic 956 Bedienungsanleitung

Hilti

Hilti SD 6000 Bedienungsanleitung

Parkside

Parkside PEPS 3 A1 Bedienungsanleitung

Festool

Festool TI 15 Bedienungsanleitung

Makita

Makita DWT190 Bedienungsanleitung

Matatakitoyo Torque Tools

Matatakitoyo Torque Tools MTD Bedienungsanleitung

Skil

Skil 2346 Montageanleitung

DeWalt

DeWalt XR LI-ION DCD931 Bedienungsanleitung

Festool

Festool DWC 18-2500 Bedienungsanleitung

EINHELL

EINHELL TE-CD 12/1 Li Series Bedienungsanleitung

Makita

Makita BFT043F Bedienungsanleitung

Stanley

Stanley SCD2 Bedienungsanleitung

Atlas Copco

Atlas Copco LUM12 SR Merkblatt