Bosch NEV 400 LSN Bedienungsanleitung

NEV 400 LSN Power supply

ISP‑NEV400‑120

en Installation manual

NEV 400 LSN Power

supply Table of contents | en 3

Bosch Security Systems B.V. 2019-11 | 04 | F.01U.309.346

Table of contents

1Safety 4

2Short information 7

3System overview 8

4Installation 10

4.1 Preparations 11

4.2 Removing the enclosure knockouts 12

4.3 Installing the tamper switch rail 13

4.4 Installing the enclosure 14

4.5 Installing the power supply and the AC terminal block 17

4.6 Installing the MAP accessory mounting plate 20

4.7 Installing a 12 V converter (optional) 22

4.8 Installing a SIV 28 fuse plate (optional) 24

4.9 Installing the EMIL expansion module 25

4.10 Installing a relay module (optional) 26

4.11 Installing the enclosure lockset 27

5Cabling 28

5.1 Cabling overview 29

5.2 Connecting the thermistor 30

5.3 Connecting the tamper switch 30

5.4 Connecting the EMIL expansion module to the power

supply

5.5 Connecting the auxiliary outputs 32

5.6 Connecting the LSN 33

6Initial set-up and programming 34

6.1 Initial set-up 34

6.2 Programming 36

7Troubleshooting 40

8Maintenance 41

9Technical data 42

4en | Safety NEV 400 LSN Power

supply

2019-11 | 04 | F.01U.309.346 Bosch Security Systems B.V.

1 Safety

Danger!

Battery

Injuries due to electric shock, fire or explosion are possible if

the battery is handled or connected incorrectly.

– Always handle the battery carefully and replace it carefully.

– Make sure that the grounding terminal is always connected

and that N, L or are connected correctly.

– Make sure to first disconnect the positive wire of the

battery when removing it from the system.

– Be careful when connecting the positive (red) wire and the

"BATT +" port of the system. Make sure not to short-circuit

with the "BATT +" port to prevent electric arc from

occurring.

Danger!

Electrostatic discharge

Injuries and damage of electronic components are possible due

to electrostatic discharge.

– Use antistatic wrist strap while working with the system.

Danger!

Electricity

Injuries due to electricity are possible if the system is not

operated correctly or if the system is opened or modified not

accordingly to this manual.

– To switch off the power, make sure to have a circuit

breaker available.

– Ensure that the system is switched off during the

installation, wiring and maintenance process.

– Only open or modify the system accordingly to this manual.

– Ensure to connect the system to the electric supply with a

protective grounding contact.

NEV 400 LSN Power

supply Safety | en 5

Bosch Security Systems B.V. 2019-11 | 04 | F.01U.309.346

– Only qualified installers/service personnel are allowed to

install and maintain this system.

Danger!

Electricity

Injuries due to electricity are possible if the system is not

grounded correctly.

– Ensure to ground the system correctly.

– When installing the AC terminal block ensure to connect

the ground wire to the ground connection point of the

enclosure back wall.

Danger!

Electricity

Injuries and damage of the system due to wrong polarity and

short circuits are possible.

When connecting wires and cables, ensure to use the correct

polarity.

Caution!

Battery

Damage or contamination of the system is possible if the

battery is not handled correctly or if the battery is not replaced

on a regular basis.

– Only use a non-spillable battery.

– Place a label with the last replacement date on the battery.

– Under normal conditions of use, replace the battery every

3-5 years.

– Recycle the battery after replacement according to local

regulations.

Caution!

Installation

Damage or malfunction of the system is possible if the system

is not mounted and installed correctly.

6en | Safety NEV 400 LSN Power

supply

2019-11 | 04 | F.01U.309.346 Bosch Security Systems B.V.

– Place the system inside the monitored area on a stable

surface.

– Once the system is tested and ready to use, secure the

enclosure door with screws.

Caution!

Maintenance

Damage or malfunction of the system is possible if it is not

maintained on a regular basis.

– Ensure to get the system maintained once a year.

– Only qualified installers/service personnel are allowed to

maintain this system.

Old electrical and electronic appliances

Electrical or electronic devices that are no longer serviceable

must be collected separately and sent for environmentally

compatible recycling (in accordance with the European Waste

Electrical and Electronic Equipment Directive).

To dispose of old electrical or electronic devices, you should use

the return and collection systems put in place in the country

concerned.

NEV 400 LSN Power

supply Short information | en 7

Bosch Security Systems B.V. 2019-11 | 04 | F.01U.309.346

2 Short information

The NEV 400 LSN provides a remote power supply and is

installed offside a control panel. Trouble and tamper events are

transmitted via LSN (local security network).

This manual contains information on how to install the NEV 400

LSN. It describes the main steps required for cabling and

programming the system. Detailed information on the single

components can be found in the correspondent datasheets and

installation manuals.

8en | System overview NEV 400 LSN Power

supply

2019-11 | 04 | F.01U.309.346 Bosch Security Systems B.V.

3 System overview

The NEV 400 LSN contains the following components:

1 2 3

Figure3.1: NEV 400 LSN system overview

Element Description

1 ICP-MAP0120 expansion enclosure

2 ISP-PCBA-EMIL

3 IMS-RM relay module (optional)

4 ICP-MAP0021 accessory mounting plate EMIL

5 SIV 28 fuse plate (mounted on ICP-MAP0020

accessory mounting plate)

6 Tamper switch rail

NEV 400 LSN Power

supply System overview | en 9

Bosch Security Systems B.V. 2019-11 | 04 | F.01U.309.346

Element Description

7 ICP-MAP0055 expansion enclosure tamper

switch

8 Thermistor

9 Batteries

10 IPP-MAP0005-2 MAP power supply 28V/150W

11 AC terminal block

10 en | Installation NEV 400 LSN Power

supply

2019-11 | 04 | F.01U.309.346 Bosch Security Systems B.V.

4 Installation

This chapter contains information on how to install the

components of the NEV 400 LSN.

Danger!

Electrostatic discharge

Injuries and damage of electronic components are possible due

to electrostatic discharge.

– Use antistatic wrist strap while working with the system.

Caution!

Installation

Damage or malfunction of the system is possible if the system

is not mounted and installed correctly.

– Place the system inside the monitored area on a stable

surface.

– Once the system is tested and ready to use, secure the

enclosure door with screws.

Inhaltsverzeichnis

Andere Bosch Stromversorgung Handbücher

Bosch

Bosch Rexroth VM350 Bedienungsanleitung

Bosch

Bosch PSB 0004 A Bedienungsanleitung

Bosch

Bosch VG4-A-PSU0 Bedienungsanleitung

Bosch

Bosch MIC IP PSU Bedienungsanleitung

Bosch

Bosch 24VDC Bedienungsanleitung

Bosch

Bosch AL 1810 CV Bedienungsanleitung

Bosch

Bosch VJC-7000-90 Bedienungsanleitung

Bosch

Bosch PUC-EXACT 1 Bedienungsanleitung

Bosch

Bosch MIC Series Bedienungsanleitung

Bosch

Bosch AL 36V-20 Bedienungsanleitung

Bosch

Bosch L 309 Series Handbuch

Bosch

Bosch LTC 5414/60 Bedienungsanleitung

Bosch

Bosch VJC-7000-90 Bedienungsanleitung

Bosch

Bosch AL 1830 CV Bedienungsanleitung

Bosch

Bosch PBC-60 Installationsanleitung

Bosch

Bosch LTC 5404/60 Bedienungsanleitung

Bosch

Bosch Rexroth IndraDrive HMV Technisches Handbuch

Bosch

Bosch Rexroth VM350 Bedienungsanleitung

Bosch

Bosch EXACT 4 Bedienungsanleitung

Bosch

Bosch Rexroth Diax 04 HVE Bedienungsanleitung

Bosch

Bosch USB-C Fast Power Supply Bedienungsanleitung

Bosch

Bosch Rexroth IndraDrive HMV02 Bedienungsanleitung

Bosch

Bosch PMF 0002 A Bedienungsanleitung

Bosch

Bosch PSU-124-DC050 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung