Bosch DL380 Gen 10 AI Bedienungsanleitung

DL380 Gen 10 AI Server

MHW‑S380RA‑AI

en Quick installation guide

DL380 Gen 10 AI Server Table of contents | en 3

Bosch Security Systems B.V. Quick installation guide 2020.08 | V2 | DOC

Table of contents

1System overview 4

2Initial installation and configuration 5

2.1 First start and initialization 5

2.2 Loging in to the server 12

2.3 Downloading and installing NVIDIA drivers and TRS software packages 12

2.4 Configuring host name 13

2.5 Enabling TRS 14

2.6 Restarting the server 14

4en | System overview DL380 Gen 10 AI Server

2020.08 | V2 | DOC Quick installation guide Bosch Security Systems B.V.

1 System overview

The DL380 Gen10 AI Server comes fully equipped with SUSE Linux Enterprise Server and

allows for the usage of the Person identification feature in BVMS. To use the Server with

BVMS, first you have to do the initial server configuration and installation of required NVIDIA

drivers and tracking and recognition service packages.

Notice!

The operating system includes the latest security patches available at the time the software

image was created. We recommend that you regularly install the latest security patches using

the online update function.

DL380 Gen 10 AI Server Initial installation and configuration | en 5

Bosch Security Systems B.V. Quick installation guide 2020.08 | V2 | DOC

2 Initial installation and configuration

This chapter describes the initial server configuration and the installation of NVIDIA drivers

and tracking and recognition service (TRS) dependencies on the DL380 AI Server.

Prerequisites

– Before starting the configuration, make sure that the DL380 Gen 10 AI Server is installed

according to the HPE instructions.

– To install the NVIDIA drivers and TRS packages, you need an internet connection.

Procedure

To perform the initial configuration and installation, you have to do following steps:

First start and initialization, page 5

Loging in to the server, page 12

Downloading and installing NVIDIA drivers and TRS software packages, page 12

Configuring host name, page 13

Enabling TRS, page 14

Restarting the server, page 14

Note: For information on how to add the DL380 Gen 10 AI Server to BVMS (BVMS version 10.0

or later), see the BVMS Configuration manual. For detailed information, see section Person

Identification Settings Page in the manual.

2.1 First start and initialization

When you start the server for the first time, the YaST2 Installation Wizard is displayed.

Use the respective functional keys to navigate through the Wizard, for example:

Key Function

F1 Help

F8 Back

F9 Abort/Cancel

F10 Next/OK

6en | Initial installation and configuration DL380 Gen 10 AI Server

2020.08 | V2 | DOC Quick installation guide Bosch Security Systems B.V.

To configure the server:

1. In the Language and Keyboard Layout dialog box, select the language and keyboard

layout from the list. Then Press F10 to continue.

2. In the Welcome dialog box, read the information. Then press F10 to continue.

DL380 Gen 10 AI Server Initial installation and configuration | en 7

Bosch Security Systems B.V. Quick installation guide 2020.08 | V2 | DOC

3. In the License Agreement dialog box, accept the SUSE Software License Agreement.

Then press F10 to continue.

4. In the Hostname and Domain Name dialog box, enter host name and domain name. Then

press F10 to continue.

8en | Initial installation and configuration DL380 Gen 10 AI Server

2020.08 | V2 | DOC Quick installation guide Bosch Security Systems B.V.

5. In the Network Settings dialog box, configure network settings (IP address, DNS and

Gateway). Then press F10 to continue.

6. In the Proxy Configuration dialog box, edit the proxy settings. Then press F10 to

continue.

DL380 Gen 10 AI Server Initial installation and configuration | en 9

Bosch Security Systems B.V. Quick installation guide 2020.08 | V2 | DOC

7. In the Clock and time Zone dialog box, select region and time zone and set date and

time. Then press F10 to continue.

8. In the NTP Configuration dialog box, edit the NTP configuration settings. Then press F10

to continue.

10 en | Initial installation and configuration DL380 Gen 10 AI Server

2020.08 | V2 | DOC Quick installation guide Bosch Security Systems B.V.

9. In the Local User dialog box, enter user name and password for the local user. Then

press F10 to continue.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Server Handbücher

Bosch

Bosch DIVAR IP 6000 Series Bedienungsanleitung

Bosch

Bosch FPA-5000 Bedienungsanleitung

Bosch

Bosch VJT-X20S Bedienungsanleitung

Bosch

Bosch DSA-N2E8X4-12AT Bedienungsanleitung

Bosch

Bosch PRA-APAS Merkblatt

Bosch

Bosch VJT-X10S Bedienungsanleitung

Bosch

Bosch VIP-X1XF Bedienungsanleitung

Bosch

Bosch DIP-6186-8HD Bedienungsanleitung

Bosch

Bosch DIP-7280-00N Bedienungsanleitung

Bosch

Bosch DIVAR IP all-in-one 7000 3U Bedienungsanleitung

Bosch

Bosch VideoJet 8008 Bedienungsanleitung

Bosch

Bosch DIVAR IP all-in-one 7000 2U Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung