Bosch Nexxt WFMC3200UC Installationsanleitung
2nd Edition/Revision 0 (4/28/04)
R020031E
WFMC/WFXD Washer Training
WFMC/WFXD Washer Training
Program
Program
1
WFMC/WFXD WASHER TRAINING MANUAL
2nd Edition/Revision 0 (4/28/04)
R020031E
2/
WFMC/WFXD Washer Table of Contents
WFMC/WFXD Washer Table of Contents
•
•Operation…………...
Operation…………... 3
3
•
•Disassembly……….
Disassembly………. 17
17
•
•Ratings…………….
Ratings……………. 34
34
•
•Service Tips……….
Service Tips………. 39
39
•
•Test Program………
Test Program……… 53
53
•
•Troubleshooting…...
Troubleshooting…... 67
67
•
•Maintenance……….
Maintenance………. 72
72
2nd Edition/Revision 0 (4/28/04)
R020031E
Operation
Operation –
–WFMC
WFMC Fascia Panels
Fascia Panels
3
WFMC64UC
WFMC32UC
2nd Edition/Revision 0 (4/28/04)
R020031E
Operation
Operation –
–WFXD
WFXD Fascia Panels
4
Fascia Panels
WFXD5200UC
WFXD8400UC
2nd Edition/Revision 0 (4/28/04)
R020031E
Both have Regular/
Cotton, Permanent Press,
Delicates, Hand Wash,
Temperature Boost, Wool,
Active Wear, Rinse Plus &
Bleach settings.
WFMC64UC
WFMC3200UC
Cycle Selector
Knob
Digital
Display
Special Wash
Buttons
Operation
Operation –
–WFMC
WFMC Controls
Controls
5
2nd Edition/Revision 0 (4/28/04)
R020031E
6
Operation
Operation –
–WFXD
WFXD Controls
Controls
Both have Regular/
Cotton, Permanent Press,
Delicates, Hand Wash,
Temp Plus, Wool Care,
Active Wear, Extra Rinse
& Bleach settings.
WFXD8400UC
WFXD5200UC
Cycle Selector
Knob
Digital
Display
Special Wash
Buttons
2nd Edition/Revision 0 (4/28/04)
R020031E
7/
Operation
Operation –
–Sensors (1)
Sensors (1)
1A. Load Sensor (WFMC32/WFXD52)
At a predefined points during the initial fill, the washer determines if it needs more water using a pressure switch. This is due
to differences in the absorption of the laundry and the size of the loads.
1B. Dynamic Load Sensor (WFMC64/WFXD84)
During the entire fill the washer continually adjusts for the size of the load and determines if more water is needed using an
analog pressure switch and a flow meter.
2. Digital Temperature Sensor (WFMC32/WFXD52 & WFMC64/WFXD84)
The thermostat monitors the temperature of the water and controls the length of time the heating element is on, ensuring the
proper temperature for the chosen cycle.
3A. Suds Sensor (WFMC32/WFXD52)
During the beginning of the1st rinse/spin phase, the washer determines if there are excessive suds and automatically adds 2
rinses (if necessary). This is accomplished via the pressure switch and the motor synchronization system.
3B. Continuous Suds Sensor (WFMC64/WFXD84)
Checking the pumping out phase of the main wash, the beginning of the 1st rinse/spin phase and the actual spin speed vs.
the programmed spin speed, the washer determines if there are excessive suds and automatically adds up to 2 rinses (if
necessary). This is accomplished via the pressure switch, analog pressure switch and the motor synchronization system.
4. Unbalanced Load Sensor (WFMC32/WFXD52 & WFMC64/WFXD84)
During the final spin cycle the washer monitors the positioning and balance of the load. If the load unbalanced, the washer
stops and adjusts the load up to 15 times and reduces the spin speed to finish the cycle. This is accomplished via the motor
synchronization system.
2nd Edition/Revision 0 (4/28/04)
R020031E
8/
Operation
Operation –
–Sensors (2)
Sensors (2)
Mechanical Pressure Switch -(WFMC32/WFXD52 & WFMC64/WFXD84) measures the
water level after the first fill. If the water level is high (like for smaller loads), the pressure increases and the
pressure switch does not provide more water.
Analog Pressure Switch -(WFMC64/WFXD84)
• Precise measuring of actual water level
• Accurate load detection
• Control of the pump - noise reduction
• Time reduction - no pumping when empty
BENEFITS: Continuous adjustment of wash times
Water and energy consumed varies according to load size
1A/1B. Load & Dynamic Load Sensors
Mechanical
Pressure
Switch
Analog
Pressure
Switch
2nd Edition/Revision 0 (4/28/04)
R020031E
9/
Operation
Operation –
–Sensors (3)
Sensors (3)
1A/1B. Flow Meter
Exact monitoring of water inflow.
Ensures exact control of water inlet valves so that there is always the right amount of water for wash and
rinse cycles.
Together with the pressure switch, there is a continuous adjustment of wash time, water and energy in
relation to the load size.
The flow meter works independently of water pressure.
BENEFITS: Minimizes water consumption
Exact Load Detection
Superior Cleaning Performance
•An internal water clock monitors water inflow via soak compartment.
•Ensures exact control of water inlet valves - always right amount of water.
•Independent from water pressure.
2nd Edition/Revision 0 (4/28/04)
R020031E
Operation
Operation –
–Sensors (4)
10 /
Sensors (4)
2. Digital Temperature Sensor
All models are equipped with an Electric Heater and Temperature Sensor (NTC) to deliver
guaranteed wash temperatures.
NOTE:Compare with competition
washers which only have heaters in top
of the line models.
Heater
Thermostat (NTC)
Andere Handbücher für Nexxt WFMC3200UC
2
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Bosch Waschmaschine Handbücher
Bosch
Bosch WAU28PH0IN Bedienungsanleitung
Bosch
Bosch WAN28151GB Bedienungsanleitung
Bosch
Bosch WGA252X0GC Bedienungsanleitung
Bosch
Bosch WAK20200EG Technisches Datenblatt
Bosch
Bosch Nexxt DLX Produkthandbuch
Bosch
Bosch WAJ20266IN Bedienungsanleitung
Bosch
Bosch WFMC544SUS Montageanleitung
Bosch
Bosch WGG254FWGR Bedienungsanleitung
Bosch
Bosch WAV28KH1BY Bedienungsanleitung
Bosch
Bosch WAN24109GB Bedienungsanleitung
Bosch
Bosch WAS20160UC - Axxis Series Front Load Washer Bedienungsanleitung
Bosch
Bosch WAJ28002GB Bedienungsanleitung
Bosch
Bosch WAW20468IL Technisches Datenblatt
Bosch
Bosch Nexxt 800 WFMC8401UC Montageanleitung
Bosch
Bosch WAK24260ID Technisches Datenblatt
Bosch
Bosch WAWH8640IL Technisches Datenblatt
Bosch
Bosch WAN282H3 Bedienungsanleitung
Bosch
Bosch WGB256090 Bedienungsanleitung
Bosch
Bosch WAW32569SN Technisches Datenblatt
Bosch
Bosch WGB256ABSN Bedienungsanleitung
