Bose PowerMatch Dante Bedienungsanleitung

Bose®PowerMatch®Dante™network card

WARNING: This product is intended for installation by professional installers only.

CAUTION: Make no modiﬁcation to the system or accessories. Unauthorized alterations may compromise safety, regulatory

compliance, and system performance.

CAUTION: Electro-Static Discharge (ESD) sensitive device. Handle with care.

Note: F/UTP shielded Cat5e cabling is recommended for use with this product.

Thank you for selecting Bose®PowerMatch®ampliﬁers for your sound reinforcement system. This document is intended to provide

professional installers with basic installation and safety guidelines for installing the optional Dante card in a Bose PowerMatch ampliﬁer.

Please read this document before attempting installation.

The Dante card provides audio connectivity with any device capable of Dante networking and is capable of receiving up to 8 audio

channels and transmitting up to 8 audio monitoring channels.

To install the Dante card into a PowerMatch ampliﬁer, follow these instructions:

1. Turn off and unplug the PowerMatch ampliﬁer.

2. Detach the rear expansion slot cover plate by removing the 2 screws. (See Figure 1.)

3. Align the Dante card with the plastic card guides in the open slot. Insert the card until the rear panel is ﬂush with the ampliﬁer.

(See Figure 2.)

Figure 1. Figure 2.

4. Screw the card into place.

5. Plug in the power cord and turn on the PowerMatch ampliﬁer.

6. Using the front panel, navigate to the FIRMWARE VERSION screen (MAIN MENU<UTILITY<FIRMWARE VERSION).

7. Check the ampliﬁer LCD screen to view whether the Dante card has been identiﬁed. (See Figure 3.)

Bose®PowerMatch®Dante™network card

Figure 3.

8. If the card does not appear in the FIRMWARE VERSION screen, repeat steps 1-7. Be sure that the card is completely pushed into

the slot, and that the card is properly aligned with the card guides.

Dante™is a trademark of Audinate Pty Ltd.

Inhaltsverzeichnis

Andere Bose Netzwerkkarte Handbücher

Bose

Bose ESP-00 Series II Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Hama

Hama 49276 Bedienungsanleitung

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung