Bose L1 Pro8 Bedienungsanleitung

L1 Pro8 & L1 Pro16

Portable Line Array System

Owner's Guide

English •5Owner's Guide •L1 Pro8/Pro16 Portable Line Array System

PRO.BOSE.COM Overview

Overview

Package Contents

L1 Pro8 L1 Pro16

Optional Accessories

• L1 Pro8 System Bag

• L1 Pro16 System Roller Bag

• L1 Pro8/Pro16 Slip cover

For additional information on L1 Pro accessories, visit PRO.BOSE.COM.

6 •English L1 Pro8/Pro16 Portable Line Array System •Owner's Guide

PRO.BOSE.COM

System Setup

qChannel Parameter Control: Adjust the level of

volume, treble, bass, or reverb for your desired

channel. Press the control to switch between

parameters; rotate the control to adjust the level

of your selected parameter.

wSignal/Clip Indicator: The LED will illuminate

green when a signal is present and will illuminate

red when the signal is clipping or the system is

entering limiting. Reduce the channel or signal

volume to prevent signal clipping or limiting.

eChannel Mute: Mute the output of an individual

channel. Press the button to mute the channel.

While muted, the button will illuminate white.

rChannel ToneMatch Button: Select the

ToneMatch preset for an individual channel. Use

MIC for microphones and use INST for acoustic

guitar. The corresponding LED will illuminate

white while selected.

tChannel Input: Analog input for connecting

microphone (XLR), instrument (TS unbalanced),

or line level (TRS balanced) cables.

yPhantom Power: Press the button to apply 48-

volt power to channels 1 and 2. The LED will

illuminate white while phantom power is applied.

uUSB Port: USB-C connector for Bose service use.

Note: This port is not compatible with

Thunderbolt 3 cables.

iXLR Line Output: Use an XLR cable to connect

the line-level output to a Sub1/Sub2 or another

bass module.

oToneMatch Port: Connect your L1 Pro to a T4S or

T8S ToneMatch mixer via a ToneMatch cable.

CAUTION: Do not connect to a computer or

phone network.

aPower Input: IEC power cord connection.

sStandby Button: Press the button to power on

the L1 Pro. The LED will illuminate white while the

system is on.

dSystem EQ: Press the button to scroll through

and select a master EQ suitable for the use case.

The corresponding LED will illuminate white while

selected.

fTRS Line Input: Use a 6.4-millimeter (¼-inch) TRS

cable to connect line-level audio sources.

gAux Line Input: Use a 3.5-millimeter (⅛-inch) TRS

cable to connect line-level audio sources.

hBluetooth® Pair Button: Set up pairing with

Bluetooth capable devices. The LED will ﬂash

blue while the L1 Pro is discoverable and

illuminate solid white when a device is paired for

streaming.

MUTE MUTE MUTE

PUSH

VOLUME

TREBLE

BASS

REVERB

VOLUME

TREBLE

BASS

REVERB

VOLUME

TREBLE

BASS

TREBLE

BASS

REVERB

VOLUME

TREBLE

BASS

REVERB

VOLUME

TREBLE

BASS

SYSTEM EQ

INST INST

OFF

SPEECH

Connections and Controls

English •7Owner's Guide •L1 Pro8/Pro16 Portable Line Array System

PRO.BOSE.COM System Setup

Assembling the System

L1 Pro8 L1 Pro16

Mid-high array

Array extension

Before connecting the system

to a power source, assemble

the system using the array

extension and mid-high array.

1. Insert the array extension

into the subwoofer power

stand.

2. Insert the mid-high array into

the array extension.

The L1 Pro8/Pro16 can be

assembled without using

the array extension; the

mid-high array can be

connected directly to the

subwoofer power stand. This

conﬁguration is most useful

when on an elevated stage to

be sure the mid-high array is

at ear level.

Subwoofer

power stand

8 •English L1 Pro8/Pro16 Portable Line Array System •Owner's Guide

PRO.BOSE.COM

System Setup

Connecting Power

1. Plug the power cord into the Power Input on

the L1 Pro.

2. Plug the other end of the power cord into a live

electrical outlet.

Note: Do not power on the system until after you've

connected your sources. See Connecting Sources

below.

3. Press the Standby Button. The LED will

illuminate white while the system is on.

Note: Press and hold the Standby Button for 10

seconds to reset the system to factory settings.

AutoO/Low-power Standby

After four hours of no use, the L1 Pro will enter

AutoO/Low-power Standby mode to save power.

To wake the system from AutoO/Low-power

Standby mode, press the Standby Button.

q w e

Connecting Sources

Channel 1 & 2 Controls

Channel 1 and 2 are for use with microphones, guitars, keyboards,

or other instruments. Channel 1 and 2 will automatically detect a

source input level to adjust volume taper and gain stage.

1. Connect your sound source to the Channel Input with the

appropriate cable.

2. Apply a ToneMatch preset—to optimize the sound of your

microphone or instrument—by pressing the Channel ToneMatch

Button until the LED for your chosen preset is illuminated.

Use MIC for microphones and use INST for acoustic guitars

and other instruments. Use OFF if you do not want to apply a

preset.

Note: Use the L1 Mix app to choose custom presets from the

ToneMatch library. The corresponding LED will illuminate green

when a custom preset is selected.

3. Press the Channel Parameter Control to choose a parameter

to modify. The parameter name will illuminate white while it is

selected.

4. Rotate the Channel Parameter Control to adjust the level of the

selected parameter. The parameter LED will indicate the level of

the selected parameter.

Note: While Reverb is selected, press and hold the control for

two seconds to mute the reverb. While reverb is muted, Reverb

will ﬂash white. To unmute reverb, press and hold for two

seconds while Reverb is selected. Reverb mute will reset when

the system is powered o.

q w

INST

English •9Owner's Guide •L1 Pro8/Pro16 Portable Line Array System

PRO.BOSE.COM System Setup

Channel 3 Controls

Channel 3 is for use with Bluetooth®enabled devices and line-level audio inputs.

Bluetooth Pairing

The following steps describe how to manually connect a Bluetooth enabled device to stream audio.

You can use the L1Mix app to access additional device control. For more information on the L1 Mix app, see

L1Mix App Control below.

1. Turn on the Bluetooth feature on your mobile device.

2. Press and hold the Bluetooth Pair Button for two seconds. When ready to pair, the LED will ﬂash blue.

3. Your L1 Pro will be visible in your device list on your mobile device. Select your L1 Pro from the device list.

When the device pairs successfully, the LED will illuminate solid white.

Note: Some notiﬁcations may be audible through the system while in use. To prevent this, disable notiﬁcations

on your connected device. Enable airplane mode to prevent call/message notiﬁcations from interrupting

audio.

TRS Line Input

A mono input. Use a 6.4-millimeter (¼-inch) TRS cable to connect line-level audio sources, such as mixers or

instrument eects.

Aux Line Input

A stereo input. Use a 3.5-millimeter (⅛-inch) TRS cable to connect a line-level audio source, such as mobile

devices or laptops.

L1 Mix App Control

Download the Bose L1 Mix app for additional device control and audio streaming. Once downloaded, follow

the instructions in the app to connect your L1 Pro. For speciﬁc information on how to use the L1 Mix App, see

the in-app help.

Features

• Adjust channel volume

• Adjust channel mixer parameters

• Adjust system EQ

• Enable channel mute

• Enable reverb mute

• Enable phantom power

• Access to ToneMatch preset library

• Save scenes

10 •English L1 Pro8/Pro16 Portable Line Array System •Owner's Guide

PRO.BOSE.COM

System Setup

Additional Adjustments

Channel Mute

Press the Channel Mute to mute the audio for an individual channel. While a channel is

muted, the button will illuminate white. Press the button again to unmute the channel.

Phantom Power

Press the Phantom Power button to apply 48-volt power to channels 1 and 2. The

LED will illuminate white while phantom power is applied. Apply phantom power

when using a condenser microphone. Press the button again to turn o phantom

power.

Note: Phantom power will only aect sources connected to a Channel Input using an

XLR cable.

System EQ

Select your system EQ by pressing the System EQ button until the

corresponding LED for your desired EQ illuminates white. Choose

between OFF, LIVE, MUSIC, and SPEECH. Your chosen EQ will stay

selected when you power o and power on your L1 Pro.

Note: The system EQ aects subwoofer/mid-high array audio only.

System EQ does not aect XLR Line Output audio.

SYSTEM EQ

OFF

SPEECH

SYSTEM EQ

OFF

SPEECH

English •11Owner's Guide •L1 Pro8/Pro16 Portable Line Array System

PRO.BOSE.COM System Setup

System Setup Scenarios

The L1 Pro8/Pro16 system can be placed on the ﬂoor or on an elevated stage. When using

the system on an elevated stage, assemble your system without the array extension (see

Assembling the System on page 7).

WARNING: Do not place the equipment in an unstable location. The equipment could

become unstable leading to a hazardous condition, which could result in injury.

L1 Pro8 L1 Pro16

Floor

Stage

MUTE MUTE

INST INST

Solo Musician

12 •English L1 Pro8/Pro16 Portable Line Array System •Owner's Guide

PRO.BOSE.COM

System Setup

MUTE MUTE MUTE

INST INST

MUTE MUTE MUTE

INST INST

Band

Musician with Mobile Device

English •13Owner's Guide •L1 Pro8/Pro16 Portable Line Array System

PRO.BOSE.COM System Setup

Musician with T8S Mixer

Musician Stereo with T4S Mixer

PUSH

PUSH PUSH

ToneMatch Cable

ToneMatch Cable ToneMatch Cable

POWER

LMAIN OUT

PUSH

PUSH PUSH

POWER

LMAIN OUT

Note: T8S left channel audio is delivered only.

Andere Handbücher für L1 Pro8

Inhaltsverzeichnis

Andere Bose Lautsprechersystem Handbücher

Bose

Bose Lifestyle 135 Bedienungsanleitung

Bose

Bose L1 Pro Series Gebrauchs- und Pflegehandbuch

Bose

Bose Lifestyle Homewide Bedienungsanleitung

Bose

Bose SB600 Bedienungsanleitung

Bose

Bose 151 Bedienungsanleitung

Bose

Bose Companion 3 Series II Bedienungsanleitung

Bose

Bose Lifestyle Homewide Bedienungsanleitung

Bose

Bose COMPANION 50 Bedienungsanleitung

Bose

Bose Panaray 502 Bedienungsanleitung

Bose

Bose SOUNDDOCK PORTABLE DIGITAL MUSIC SYSTEM Bedienungsanleitung

Bose

Bose Solo 5 Bedienungsanleitung

Bose

Bose 101 Series II Bedienungsanleitung

Bose

Bose Acoustimass SE-5 Series II Bedienungsanleitung

Bose

Bose SURROUND SPEAKERS 700 Bedienungsanleitung

Bose

Bose Acoustimass Bass System Bedienungsanleitung

Bose

Bose Lifestyle Surround Sound Speaker System Bedienungsanleitung

Bose

Bose Acoustimass 3 Powered Bedienungsanleitung

Bose

Bose CineMate Series II Bedienungsanleitung

Bose

Bose F1 Model 812 Passive Bedienungsanleitung

Bose

Bose Solo TV Sound Bedienungsanleitung

Bose

Bose Solo 5 Bedienungsanleitung

Bose

Bose Freestyle Speaker System Bedienungsanleitung

Bose

Bose 501 Bedienungsanleitung

Bose

Bose Lifestyle 5 Series II Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung