Bose FreeSpace 360 Bedienungsanleitung
1
CAUTION: The FreeSpace® 360P/360 loudspeaker conta ns no
user serv ceable parts. To prevent warranty nfract ons, refer
serv c ng to warranty serv ce centers or factory serv ce.
PROPRIETARY INFORMATION
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
OF BOSE CORPORATION WHICH IS BEING FURNISHED
ONLY FOR THE PURPOSE OF SERVICING THE IDENTIFIED
BOSE PRODUCT BY AN AUTHORIZED BOSE SERVICE CEN-
TER OR OWNER OF THE BOSE PRODUCT, AND SHALL NOT
BE REPRODUCED OR USED FOR ANY OTHER PURPOSE.
WARRANTY INFORMATION
The FreeSp ce 360P/360 loudspe ker is covered by 5 ye r w rr nty
Contents
Product Descr pt on ..........................................................................................................................2
Spec f cat ons ....................................................................................................................................2
D sassembly/Assembly Procedures ................................................................................................3
Figure 1. Wiring Di gr m.....................................................................................................................3
Test Procedures ................................................................................................................................4
Figure 2. 4 Ohm P ssive Version Equ lizer Schem tic Di gr m ........................................................4
Figure 3. 70/100V P ssive Version Equ lizer Schem tic Di gr m......................................................4
Ma n Part L st.....................................................................................................................................5
Figure 4. Exploded View ......................................................................................................................6
Equal zer PCB Part L st ....................................................................................................................7
Packag ng Part L st ...........................................................................................................................7
Figure 5. P ck ging View ....................................................................................................................7
Figure 7. Equ lizer PCB Component L yout .......................................................................................7
Figure 6. Position of EQ PCB on Driver...............................................................................................7
Click here for FS360 Image
ECN 29027 added "end user owners guide"
2
SPECIFICATIONS
PRODUCT DESCRIPTION
The FreeSp ce® 360P/360 is full-r nge environment l loudspe ker intended for b ckground
music nd p ging. There re three versions. The FS360P 70V/100V, 25W version h s n intern l
p ssive equ lizer. The FS360P 4 Ohm, 25W version h s n intern l p ssive equ lizer. The FS360
70V/100V, 25W version requires Bose® FS360 ctive equ lizer to be connected to or loc ted in
the mplifier.
The FreeSp ce 360P/360 c n be inst lled in-ground with pproxim tely one-h lf of the spe ker
exposed bove ground. It c n lso be perm nently secured bove ground on horizont l surf ce
such s deck.
External d mens ons: 13.80" b se di meter x 14.6" height
(320 mm b se di meter x 370 mm height)
We ght (packed system): 12.0 lbs. (5.4 kg)
Internal cab net volume: Top enclosure: 142 cubic inches (2.3 liters)
Bottom enclosure: 659 cubic inches (10.8 liters)
Port: Diffuser port: Tuned to 80 Hz
Three connecting ports: Tuned to 180 Hz
Impedance (nom nal): Non-p ssive version: 214 Ohm, 70V tr nsformer @ 25W
271 Ohm, 100V tr nsformer @ 25W
P ssive version: 414 Ohm, 70V tr nsformer @ 25W
852 Ohm, 100V tr nsformer @ 25W
Non-tr nsformer version: 4 Ohms
Power Handl ng: 25W (70V, 100V) continuous per IEC-268-5, 100 hour dur tion
Sens t v ty (1W, 1M): 80 dB SPL, free field, per IEC-268-5 (for oct ve-b nd centered t 400 Hz)
3
DISASSEMBLY/ASSEMBLY PROCEDURES
1. Mount ng Plate Removal
1.1 Remove the four screws (20) th t secure
the mounting pl te (10) to the b se housing
(14).
1.2 Lift off the mounting pl te.
2. Mount ng Plate Replacement
2.1 Align the mounting pl te (10) to the b se
(14). Repl ce the four screws (20) th t secure
the mounting pl te to the b se.
3. Dr ver/Equal zer PCB Removal
Note: For versions without p ssive equ l-
izer, ignore references to the equ lizer PCB.
3.1 Remove the three screws (6) th t secure
the driver protector (4) nd the driver (1) to the
c p housing (13).
3.2 Lift off the driver protector. The equ lizer
PCB is tt ched by screw to the driver
m gnet. Work the driver with tt ched equ l-
izer PCB out of the c p housing.
3.3 Cut the wires s close s possible from the
driver termin l. Remove the screw th t se-
cures the equ lizer PCB to the driver m gnet.
4. Dr ver/Equal zer PCB Replacement
Note: For versions without p ssive equ l-
izer, ignore references to the equ lizer PCB.
4.1 Referring to Figure 6, position the equ l-
izer PCB on the driver nd using the screw
removed in procedure 3.3, tt ch the equ lizer
PCB to the driver (1) m gnet. Att ch the red
wire to the positive (+) driver termin l nd the
bl ck wire to the neg tive (-) driver termin l.
Refer to Figure 1 Wiring Di gr m.
4.2 Work the ssembled driver nd equ lizer
into the c p housing (13). Twist together ny
excess wire to prevent wire buzz.
4.3 Align the driver protector (4), the driver
nd the driver g sket (2) to the c p housing.
Repl ce the three screws (6) th t secure the
driver to the c p housing.
5. Transformer Removal
Note: For tr nsformer versions only.
5.1 To g in sl ck in the wires, perform proce-
dure 3.1 nd 3.2 first.
5.2 Remove the four screws (8) th t secure
the tr nsformer pl te (11) to the c p housing
(13). Lift up the tr nsformer pl te.
5.3 M ke note of the wiring configur tion
nd then remove the wires from the tr ns-
former (3).
5.4 Remove the two nuts (9) th t secure the
tr nsformer to the tr nsformer pl te.
6. Transformer Replacement
Note: For tr nsformer versions only.
6.1 Align the tr nsformer (3) to the tr nsformer
pl te (11) nd repl ce the two nuts (9) th t
secure the tr nsformer to the tr nsformer
pl te.
6.2 Referring to the wiring configur tion notes
t ken in procedure 5.3 or to Figure 1 Wiring
Di gr m, tt ch the wires to the tr nsformer.
6.3 Lower the tr nsformer with tt ched
tr nsformer pl te into the c p housing (13)
nd secure into pl ce with four screws (8).
6.4 Use procedure 4.2 nd 4.3 to repl ce the
driver.
F gure 1. W r ng D agram
P ssive Version
Non-p ssive Version
(Refer to Figure 4)
COM
+IN
Tr nsformer
EQ PCB
E4
Red
Bl ck
Wire h rness
C p
(in h rness)
Red
Bl ck
E2
Wire post
(two pl ces)
+
_
Red
Tr nsformer
Red
Bl ck
Wire h rness
Red
Bl ck
+
_
Wire post
(two pl ces)
COM
+IN
4
TEST PROCEDURES
1. Phase Check
1.1 Referring to Figure 1, ensure proper wiring
of the loudspe ker.
2. Rub and T ck Test
2.1 Apply 35Vrms, 80Hz sign l to the input
of the loudspe ker.
Note: No extr neous noises such s rubbing,
scr ping or ticking should be he rd. To distin-
guish between norm l suspension noise, rubs
nd ticks, displ ce the cone of the driver with
your finger. If the sound c n be m de to go
w y or get worse, it’s rub or tick nd the
driver should be repl ced. If the noise st ys
the s me, it’s norm l suspension noise nd
will not be he rd with regul r progr m m te-
ri l.
3. A r Leak Test
3.1 Apply (6Vrms for 4 Ohm version)
(35Vrms for tr nsformer version), 80Hz sign l
to the input of the loudspe ker.
3.2 Check for ir le ks round the c binet,
driver, nd tr nsformer pl te. Repl ce ny
g sket th t is found to be defective.
4. Sweep Test
4.1 Apply (6Vrms for 4 Ohm version)
(35Vrms for tr nsformer version), 50Hz sign l
to the input of the loudspe ker.
4.2 Sweep the sign l gener tor from 50Hz to
5kHz. Listen for buzzes, r ttles or extr neous
noises from the driver or intern l p rts. A
whooshing noise from the port round 80Hz is
ccept ble. Repl ce ny driver th t buzzes.
Redress ny wire th t buzzes.
NOT USED
OUT-
OUT+IN+
IN-
C1
NOT USED
E4
R1
6.2 Ohm
E3
C2
10uF, BP, 50V
JP1
NOT USED
E1
E2
R2
2.4 Ohm
PTC1
L1
1.5mH
NO CONNECTION
F gure 3. 70/100V Pass ve Vers on Equal zer Schemat c D agram
OUT-
OUT+IN+
IN-
C1
47uF, BP, 50V
E4
R1
6.2 Ohm
E3
C2
10uF, BP, 50V
JP1
NOT USED
E1
E2
R2
2.4 Ohm
PTC1
L1
1.5mH
F gure 2. 4 Ohm Pass ve Vers on Equal zer Schemat c D agram
5
MAIN PART LIST
(Item numbers re referenced in Figure 4)
Note: The ctive equ liz tion version requires the use of n extern l Bose® ctive equ lizer.
The p ssive version h s p ssive equ lizer PCB mounted to the re r of the driver.
Item Number Descr pt on Part
Number Qty.
4.5" Driver ( ctive equ liz tion version) 196241 1
4.5 " Driver With Equ lizer PCB (tr nsformer p ssive version)
Consists of:
Driver, 4.5”, Environment l
Equ lizer PCB
Screw, T pp, 8-32x.375, HEXW, HEX
W sher, Fender, Non-M gnetic
254390
254379
254378
134517-06
181700-01
1
1
1
1
1
1
4.5 " Driver With Equ lizer PCB (4 Ohm p ssive version)
Consists of:
Driver, 4.5”, Environment l
Equ lizer PCB
Screw, T pp, 8-32x.375, HEXW, HEX
W sher, Fender, Non-M gnetic
257251
254379
257250
134517-06
181700-01
1
1
1
1
1
2 G sket, Driver, 4.5” 116572 1
Tr nsformer, 70V, 25W 196236
3Tr nsformer, 100V, 25W 196237 1
4Protector, Driver1200031
70V Wire H rness, With Inline 6.8 uF C p. (p ssive version)
(25 uF, 150V, 20%, BP C p citor)254428
125959
100V Wire H rness, With Inline 4.7 uF C p. (p ssive version)
(4.7 uF, 100V, 5%, NP C p citor) 252370-001
252369-475
5
Wire H rness ( ctive equ liz tion nd 4 Ohm p ssive version) 191929
1
Screw, TT, 8-32x.75, HEX, SL/XREC (p ssive version) 256070-08
6Screw, TAPP, 8-32, PAN He d ( ctive equ liz tion version) 145727-06 3
Screw, TAPP, 8-10, .75, HEXW, HEX (p ssive version) 178835-12
7Screw, TAPP, 8-11, PAN, XREC ( ctive equ liz tion version) 193902-12 3
8 Screw, TAPP, 8-32x.375, PAN, XRC/S 145727-06 4
9 Nut, Hex, 8-32, KEPS 100413-2 2
10 Pl te, Mounting 193903 1
11 Pl te, Tr nsformer, Bl ck 191927-001 1
12 Grille, Diffuser, Bl ck 191926-001 1
Housing, C p, Gr nite Green (p ssive version) 190691-005
13 Housing, C p, Green ( ctive equ liz tion version) 190691-003 1
Housing, B se, Gr nite Green (p ssive version) 190690-005
14 Housing, B se, Green ( ctive equ liz tion version) 190690-003 1
6
F gure 4. Exploded V ew
BLACK
RED
RED
RED
BLACK
CAPACITOR (IN HARNESS)
8
3
9
11
4x
1
4
6
14
3x 7
5
10
2x
13
2
12
20
EQ PCB
4x
3x
No transformer n
the 4 Ohm vers on
Reference
Designator Description Part Number Qty. Note
R1 6.2 Ohm, WW, 5W, 10% 125605-6R2 1
R2 2.4 Ohm, WW, 5W, 10% 125605-2R4 1
C1 47uF, EL, BP, 85, 50V, 20% 136548 1 4 Ohm vers on only
C2 10 uF, EL, BP, 85C, 50V, 20% 138365 1
L1 1.5 mH 139571 1
PTC1 Polysw tch, 60V, RXE135 190348-135 1 4 Ohm vers on only
- Screw, Mach, 6-32, PAN, XREC 181701-01 1
- Nut, HEX, 6-32 103234-632 1
- Washer, Fender, Non-Magnet c 181700-01 1
- P n, Grooved, .52x.34x.045 129000-5234 2
PACKAGING PART LIST
igure 5. Packaging View
EQUALIZER PCB PART LIST
(Pass ve vers on)
17
16
15
19
20 2122
18
Item
Number Description Part Number Qty.
15Manual, Owner’s 254405 (PRO installer) 259124 (end user) 1each
16 Carton 254393 1
17 Bag, Poly, 48X24X14X2 M l 128238 1
18 Connector, W re Nut, 16-22 AWG 188199-001 2
19 Bag, Poly, 3x3x2 M l 107305 1
20 Screw, Tapp, 8-11, PAN, XREC, 1.75 193902-28 4
21 Washer, Flat, .438” D ameter, #8 137923-08 4
22 Connector, Butt Spl ce, 10-22 AWG 198380-2218 1
HOT MELT SHOULD NOT COVER
RESISTORS OR WIRE WRAP PINS.
E4
R1
L1
E2
+ INPUT
+ OUTPUT
C2
R2
igure 7. Equalizer PCB Component Layout
igure 6. Position of EQ PCB on Driver
7
Spec f cat ons and Features Subject to Change W thout Not ce
Bose Corpor tion
The Mount in
Fr mingh m M ss chusetts USA 01701
P/N 197458 REV. 01 6/2000 For Technic l Assist nce or P rt Orders, C ll 1-800-233-4408
Andere Handbücher für FreeSpace 360
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Bose Sprecher Handbücher
Bose
Bose Sub1 Bedienungsanleitung
Bose
Bose Companion 3 Series II Bedienungsanleitung
Bose
Bose ArenaMatch DeltaQ Bedienungsanleitung
Bose
Bose Acoustimass 500 Bedienungsanleitung
Bose
Bose SURROUND SPEAKERS 700 Bedienungsanleitung
Bose
Bose SOUNDWEAR Companion Bedienungsanleitung
Bose
Bose DesignMax DM3C Bedienungsanleitung
Bose
Bose Panaray MA12 Bedienungsanleitung
Bose
Bose FreeSpace DS 16F Bedienungsanleitung
Bose
Bose Acoustic Wave Cannon System II Bedienungsanleitung
Bose
Bose SoundDock XT Bedienungsanleitung
Bose
Bose Sub1 Bedienungsanleitung
Bose
Bose 302 A Bedienungsanleitung
Bose
Bose SoundLink Bluetooth speaker III Bedienungsanleitung
Bose
Bose Soundbar 500 Installationsanleitung
Bose
Bose SOUNDBAR 550 Bedienungsanleitung
Bose
Bose SOUNDLINK MICRO Bedienungsanleitung
Bose
Bose Acoustimass-20 Bedienungsanleitung
Bose
Bose 4001 Bedienungsanleitung
Bose
Bose Wireless Computer Speaker Bedienungsanleitung
