Bose Sub1 Bedienungsanleitung

PRO.BOSE.COM/L1 1OF 6

PROFESSIONAL

PRELIMINARY TECHNICAL DATA

SUB1

POWERED BASS MODULE

Product Overview

A powered, portable bass module, the Sub1 subwoofer combines with virtually any portable PA and delivers

low-end performance down to 40 Hz. Its unique 7" × 13" high-excursion RaceTrack driver allows for an ultra-

slim enclosure, delivering performance that rivals a traditional 12" woofer without the cumbersome size,

freeing up room in your vehicle and on the stage. Compared to the Sub2 subwoofer, Sub1 is the more compact

subwoofer option for the Bose L1 Pro32 system, combining seamlessly via single-cable SubMatch connectivity.

You can stack multiple Sub1 subwoofers for even more low end — or to unleash Cardioid Mode for directional

bass. With a Sub1, you get a subwoofer that goes virtually anywhere and eortlessly ﬁlls out your sound.

Key Features

Add powerful bass to your portable PA system with low-end range down to 40 Hz

Go from vehicle to venue easily with a slim design featuring a unique 7" × 13" high-excursion RaceTrack

driver; performance that rivals a conventional 12" woofer with a smaller footprint

Stack multiple Sub1 subwoofers for even more bass or unleash Cardioid Mode for focused, directional

performance that steers the bass out front and decreases feedback

Combine seamlessly with Bose L1 Pro32 portable line array via proprietary SubMatch connectivity, which

delivers both power and audio over a single cable

Pair with other powered loudspeakers via line input and output with selectable crossover modes, plus

integrated threaded pole mount for use with Bose S1 Pro PA and more

(Grille removed)

PRO.BOSE.COM/L1 2OF 6

Technical Speciﬁcations

Preliminary

System Performance

Model Name Sub1

System Type Self-powered bass module

Frequency Response (–3 dB) 140 Hz to 180 Hz

Frequency Range (–10 dB) 32 Hz to 250 Hz

Nominal Vertical Coverage Pattern 0°

Nominal Horizontal Coverage Pattern Omnidirectional (with –10 dB rear rejection in Cardioid mode)

Calculated Maximum SPL @ 1 m, continuous 2118.6 dB

Calculated Maximum SPL @ 1 m, peak 2124.6 dB

Crossover 200 Hz

Transducers

Low Frequency 1 × RaceTrack low-frequency driver 7"× 13"

Low Frequency Voice Coil Size 2"

Driver Protection Dynamic limiting

Ampliﬁcation

Type Class D

Low Frequency Ampliﬁer Channel 480 W

Cooling Convection cooling

Onboard Mixer

Channels Two

Channel 1 & 2 Input: Audio Type Combination XLR or ¼"TRS connector (mic/instrument/line)

Channel 1 & 2 Input: Impedance 100 KΩ

Channel 1 & 2 Input: Channel Gain +10 dB to +45 dB; from input to driver, controlled by volume control

Channel 1 & 2 Input: Max Input Signal +24 dBu

Channel 1 & 2 Output: Audio Type XLR connector, line-level, full-frequency bandwidth

SubMatch Input: Audio Type Bose proprietary multi-pin cable

SubMatch Thruput: Audio Type Bose proprietary multi-pin cable

LED Indicators Standby, Phase/Pattern selection, Input EQ selection, Output EQ selection,

Signal/Clip Indicator

AC Power

AC Power Input 100–240 VAC (±20%, 50/60 Hz)

Input: Electrical Type IEC, SubMatch

Initial turn on inrush current 14.9 A at 120 V; 29.3 A at 230 V

Inrush current after AC mains interruption of

5 s 5.8 A at 120 V; 32.0 A at 230 V

PRO.BOSE.COM/L1 3OF 6

Technical Speciﬁcations

Preliminary

Enclosure

Color Black

Enclosures Material High-impact polypropylene, birch plywood

Grille Material Powder-coated perforated steel

Product Dimensions (H × W × D) 533 × 260 × 529 mm (21.0 × 10.2 × 20.8 in)

Shipping Dimensions (H × W × D) 620 × 620 × 330 mm (24.41 × 24.41 × 12.99 in)

Net Weight 315.5 kg (34.1 lbs)

Shipping Weight 18.0 kg (39.6 lbs)

Warranty Period 2 years

Included Accessories IEC power cord, slip cover

Optional Accessories Sub1 Roller Bag, Adjustable Speaker Pole, SubMatch Cable

Product Part Numbers

840918-1100 SUB1 POWERED BASS MODULE,120V,US

840918-2100 SUB1 POWERED BASS MODULE,230V,EU

840918-3100 SUB1 POWERED BASS MODULE,100V,JP

840918-4100 SUB1 POWERED BASS MODULE,230V,UK

840918-5100 SUB1 POWERED BASS MODULE,230V,AU

840918-5130 SUB1 POWERED BASS MODULE,230V,INDIA

856985-0110 PREMIUM ROLLER BAG,SUB1,BLACK

857172-0110 SUBMATCH CABLE,BLACK

857000-0110 SPEAKER STAND,SUB POLE,BLACK

Footnotes

(1) Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ.

(2) Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.

(3) Net weight excludes slip cover and power cord.

PRO.BOSE.COM/L1 4OF 6

Connections and Controls

qStandby Button: Press the button to

power on the Sub. The LED will illuminate

white while the Sub is on.

wLine Inputs: Analog input for connecting

an L1 Pro or other line-level audio source.

Compatible with XLR, TRS balanced, and

TS unbalanced cables.

eLine Outputs: Use an XLR cable to

connect the line-level output to a

loudspeaker.

rSubMatch Thruput: Connect an additional

Sub bass module with a SubMatch cable.

Up to two Sub1 or Sub2 powered bass

modules can be powered by a single L1

Pro32 via SubMatch connection.

tPower Input Cover: Prevents

simultaneous use of the SubMatch Input

and Power Input. Slide the cover to reveal

the power input that is needed for setup.

ySubMatch Input: Connect the Sub to an

L1 Pro32 with a SubMatch cable.

uPower Input: IEC power cord connection.

iUSB Port: USB-C connector for Bose

service use and ﬁrmware updates.

Note: This port is not compatible with

Thunderbolt 3 cables.

oLine Output EQ: Select between FULL

bandwidth or a multi-purpose HPF when

using Line Outputs. Press the button to

switch EQ settings. The corresponding

LED will illuminate white while selected.

aLine Input EQ: Select between an

optimized EQ for an L1 Pro or a multi-

purpose LPF when using Line Inputs.

Press the button to switch EQ settings.

The corresponding LED will illuminate

white while selected.

sSignal/Clip Indicator: The LED will

illuminate green when a signal is present

and will illuminate red when the signal is

clipping or the Sub is entering limiting.

Reduce the level or signal volume to

prevent signal clipping or limiting.

dLevel Control: Adjust the level of audio

output. The Level Control does not aect

the Line Outputs. The 12 o’clock position

is recommended when in use with an

L1Pro32.

fPhase/Pattern Button: Adjust the polarity

of the Sub. Press the button to switch

polarity. The corresponding LED will

illuminate white while selected. Also

allows access to Cardioid mode when

using two identical Sub modules.

LINE IN 1LINE IN 2 LINE IN EQ

LINE OUT 1LINE OUT 2 LINE OUT EQ

PHASE/PATTERN LEVEL

LPF

FULL

HPF

SUBMATCH

THRU

SUBMATCH

CARDIOID

r t y

PRO.BOSE.COM/L1 5OF 6

Product Dimensions

Front View Right ViewLeft View

Bottom View Top View

Rear View

Performance

Frequency Response (On-Axis)

20 100 1000 10000 20000

100

110

120

130

140

SPL (dB)

Frequency (Hz)

PRO.BOSE.COM/L1 6OF 6

Architect and Engineer Speciﬁcation

The sub shall be a single-driver, subwoofer with internally-supplied power ampliﬁcation and active equalization

for multiple operating modes as follows:

The sub shall consist of a modular 7" x 13" (177 mm x 330 mm) RaceTrack low-frequency driver mounted in a

ported bass enclosure.

The nominal horizontal beamwidth of the loudspeaker shall be omnidirectional, with a –10 dB rear rejection

when in Cardioid mode. The nominal vertical coverage shall be 0°. The power ampliﬁcation for transducers

shall be supplied by an integral single-channel onboard ampliﬁer providing 480 W for the low-frequency

transducer.

The onboard digital mixer shall consist of two input channels. Each input channel shall provide two

combination XLR or ¼" TRS connectors (line-level) with selectable equalization presets for low-pass ﬁlter and

L1 optimization. Each input channel shall also provide an XLR balanced line-level connector with selectable

equalization presets for full bandwidth, high-pass ﬁlter, and S1 Pro optimization. The digital mixer shall provide

master output level control and phase/pattern control for positive polarity, negative polarity, and Cardioid

mode. The sub shall provide multi-pin SubMatch input and output connectors to receive power from L1 Pro32

and send power to another Sub1/Sub2 with a Bose SubMatch cable.

The enclosure of the sub shall be constructed of high-impact polypropylene and birch plywood. The sub shall

provide a pole-mount M20 threaded insert for use with the Bose Sub1/Sub2 Adjustable Speaker Pole. The sub

shall provide four interlocking feet on each side for stacking with one other Sub1.

The sub’s dimensions shall be 21.0" H × 10.2" W × 20.8" D (533 mm × 260 mm × 529 mm). Its net weight shall

be 34.1lbs (15.5 kg).

The sub shall be the Bose Sub1 portable powered bass module.

Safety and Regulatory Compliance

The Sub1 powered bass module complies with the following standards:

• UL/IEC/EN62368-1 Audio/Video, Information and Communication Technology Equipment

• Ecodesign Requirements for Energy Related Products Directive 2009/125/EC

• Radio Equipment Directive 2014/53/EU

• CAN ICES-3 (B)/NMB-3(B)

• FCC Part 15 Class B

Bose, L1, and ToneMatch are trademarks of Bose Corporation. All other trademarks are the property of their

respective owners.

For additional speciﬁcations and application information, please visit PRO.BOSE.COM.

Speciﬁcations subject to change without notice. 6/2021

Andere Handbücher für Sub1

Inhaltsverzeichnis

Andere Bose Sprecher Handbücher

Bose

Bose SoundLink Wireless Music System Stücklistenhandbuch

Bose

Bose SoundLink Bluetooth Mobile Speaker II Betriebsanleitung

Bose

Bose FreeSpace DS 40F 8 ohm Bedienungsanleitung

Bose

Bose SoundTouchPortable Wi-Fi Bedienungsanleitung

Bose

Bose Companion 2 Series II Bedienungsanleitung

Bose

Bose 111 Bedienungsanleitung

Bose

Bose VIRTUALLY INVISIBLE 191 SPEAKERS Kurzanleitung

Bose

Bose PANARAY LT3202 Bedienungsanleitung

Bose

Bose FreeSpace DS 40F Bedienungsanleitung

Bose

Bose 301 Series III Bedienungsanleitung

Bose

Bose F1 Model 812 Passive Installations- und Betriebsanleitung

Bose

Bose Companion Satellite Bedienungsanleitung

Bose

Bose 802 Bedienungsanleitung

Bose

Bose SoundLink Mini Bluetooth speaker II Bedienungsanleitung

Bose

Bose L-Bracket 203 Bedienungsanleitung

Bose

Bose DesignMax DM6SE Bedienungsanleitung

Bose

Bose L1 Compact Bedienungsanleitung

Bose

Bose Panaray MSA12X Leitfaden

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Bose

Bose L1 Model I Bedienungsanleitung

Bose

Bose 201 Series Bedienungsanleitung

Bose

Bose FreeSpace DS 16SE Bedienungsanleitung

Bose

Bose Wireless Computer Speaker Bedienungsanleitung

Bose

Bose SOUNDLINK REVOLVE Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung

Tannoy

Tannoy SYSTEM 600a Bedienungsanleitung