Boser HS-5010 Bedienungsanleitung

HS-5010

Pentium

VGA I.S.B.

Full Size TritonTM

VX All-in-one

PICMGTM

Bus Industrial Single Board Computer

Copyrights

This manual is copyrighted and all rights are reserved. It is not allow any non authorization

in copied, photocopied, translated or reproduced to any electronic or machine readable

form in whole or in part without prior written consent from the manufacturer.

In general, the manufacturer will not be liable for any direct, indirect, special,

incidental or consequential damages arising from the use of inability to use the

product or documentation, even if advised of the possibility of such damages.

The manufacturer keeps the rights in the subject to change the contents of this

manual without prior notices in order to improve the function design,

performance,qualityandreliability.Theauthorassumesnoresponsibilityforany

errors or omissions, which may appear in this manual, nor does it make a

commitment to update the information contained herein.

Trademarks

BOSER is a registered trademark of BOSER Technology Co., Ltd.

Award is a registered trademark of Award Software, Inc.

ISB is a registered trademark of BOSER Technology Co., Ltd.

All other trademarks, products and or product's name mentioned herein are

mentioned for identificationpurposes only, and may be trademarks and/or

registered trademarks of their respective companies or owners.

User Manual edition 1.6, Aug.24 2001

Contents?i

Contents

HS-5010...................................................................................................................1

INTRODUCTION..................................................................錯誤! 尚未定義書籤。

1.1 SPECIFICATIONS ......................................................................................................4

1.2 WHAT YOU HAVE.....................................................錯誤! 尚未定義書籤。

INSTALLATION.............................................................................................................6

2.1 HS-5010'S LAYOUT...............................................................................................6

2.2 CAUTION!!..................................................................錯誤! 尚未定義書籤。

2.3 JUMPER DESCRIPTION...............................................錯誤! 尚未定義書籤。

2.4 SETTING THE CPU....................................................錯誤! 尚未定義書籤。

2.5 SYSTEM MEMORY DRAM（EDO RAM SUPPORTED）................................12

2.6 WATCH-DOG TIMER..................................................錯誤! 尚未定義書籤。

2.7 PCI VGA CONTROLLER......................................................................................14

2.8 DISKONCHIP?ADDRESS SETTING.....................................................................14

2.9 CPU TEMPERATURE ALARM...............................................................................12

CONNECTION..............................................................................................................15

3.1 FLOPPY DISK DRIVE CONNECTOR......................................................................15

3.2 PCI E-IDE DRIVE CONNECTOR..........................................................................16

3.3 PARALLEL PORT..................................................................................................17

3.4 SERIAL PORTS......................................................................................................17

3.5 KEYBOARD CONNECTOR.....................................................................................18

3.6 EXTERNALSWITCHES AND INDICATORS ............................................................19

3.7 EXTERNAL SPEAKER............................................................................................19

3.8 6-PIN MINI-DIN PS/2 MOUSE CONNECTOR.........................................................20

3.9 VGA CONNECTOR................................................................................................20

3.10 USB PORTS CONNECTOR................................................................................21

3.11 INTERNAL VGA CONNECTOR............................................................................21

3.12 IR CONNECTOR...................................................................................................21

ii ?Contents

AWARD BIOS SETUP...............................................................................................22

4.1 MAIN MENU...........................................................................................................23

4.2 STANDARD CMOS SETUP..................................................................................24

4.3 BIOS FEATURES SETUP......................................................................................25

4.4 CHIPSET FEATURES SETUP..................................................................................26

4.5 INTEGRATED PERIPHERALS..................................................................................27

4.6 POWER MANAGEMENT SETUP............................................................................28

Chapter-1

Introduction

TheHS-5010isanall-in-onefull-size card with a full features in a small package

for the industrial applications. The Intel VX chipset provides major core logic, in

addition to the support for various CPU, it also includes Intel MMX.

TheHS-5010’sintegral switchsystem providesa widerange ofpower regulation

from 2.8V to 3.45V to maintain a constant temperature between 50°C and 60°C.

TheHS-5010 has designed with a feature of on board temperature sensor. If the

temperature range up to 60°C, then the warning buzzer alarm will be triggered

until the temperatures stabilized.

The HS-5010 supports VGA equipped using S3 86C775 chipset with 2MB

memory. The HS-5010 takes advantage of both 32bit PCI and 16bit ISA bus to

provide high performance graphics accelerator. VGA resolution is supported up

to1024by768,at256colors,withareservedinternal10pinVGAconnector to the

monitor.

The HS-5010 provides an optional DiskOnChipTM socket supports the memory

up to 72MB. That means you can issue commands directly from DOS, and you

don’t need any other driver or application.

USBandIRportsarealsoonboardtoreservethe upgradespace forthe interface

transmission.

Additional safety features include the HS-5010 polyswitch resettable fuse

system. In the event of the keyboard, PS/2 mouse, or USB circuit short, the fuse

breaks the contact. Resumption of the normal power flow will, however, prompt

an automatic reconnection without any reinstallation.

1.1 Major Features

?? CPU：Intel Pentium CPU 75~233MHz, AMD K5、K6, Cyrix M2, 6x86 or

Intel MMX; Socket 7 ZIF socket.

?? Bus Interface：PCI/ISA Bus; Comply to PICMG standard.

?? Chipset：Intel Triton VX chipset.

?? Data Bus：64bit.

?? Processing Ability：64bit.

?? VGA Controller ：S3 86C775 chipset with 2MB memory, support

resolutions up to 1280 x 1024 256u colors, reserved internal 10pin VGA

connector.

?? PCI Enhanced IDE Interface：Supports up to four IDE devices support

mode3/4 hard disk, data transfer rate 11.1MB/sec minimum.

?? RAM Memory：Up to 128MB, uses four 72pin SIMM or one DIMM

sockets, supports BEDO, EDO, Fast Page DRAM and SDRAM.

?? Cache Memory：512KB pipeline burst cache memory.

?? Floppy Disk Drive Interface：Supports up to two floppy disk drives.

?? Parallel Port：One bi-directional parallel port. Supports SPP/ECP/EPP

mode.

?? Serial Port：Two RS-232 ports. Both use 16C550 UART with 16byte

FIFO.

?? BIOS：Award flash BIOS. Supports PnP, Green features.

?? Watch-Dog Timer：Hardware circuit can be set to 1, 2, 10, 20, 110 or

220 seconds period. Reset or NMI were generated when CPU did not

periodically trigger the timer.

?? DMA Channel：7.

?? Interrupt Levels：15.

?? Keyboard：6-pin Mini-din connector or 5-pin header. Supports the

standard PC/AT Keyboard.

?? Mouse：6-pin Mini-din connector support PS/2 standard mouse.

?? USB：Supports 2 USB ports.

?? IR Interface：Supports one IrDA TX/RX header.

?? CMOS：Real-time clock/calendar and battery backup by DS12887 or

equivalent devices.

?? DiskOnChipTM：A socket provides for SSD up to 72MB.

?? CPU Temperature Alarm：Hardware circuit is designed via beeping

alarm if CPU’s temperature is over heating 60°C limited.

?? Power Supply Voltage：+5V（4.75 to 5.25V）, +12V/-12V power supply.

?? Max. Power Requirement：+5V@6A, +12V/-12V power supply.

?? Operating Temperature：0~55°C（CPU needs a cooler）.

?? Dimension：13.26”（L）x 4.8”（W）（337mm x 122mm）.

1.2 What do you have

The HS-5010 package includes the following items：

?? HS-5010 Industrial Single Board Computer.

?? Printer port flat cable.

?? IDE port flat cable.

?? FDD port flat cable.

?? COM port cable.

?? 6-pin mini-din to 5-pin din keyboard adapter cable.

?? VGA Utility Diskette.

?? User’s Manual.

If any of these items are missing or damaged, please contact your dealer.

Keep all the shipping materials and packing box in case you want to ship or

store the product in feature.

2.1 HS-5010’s Layout

2.2 Caution!

Your HS-5010 Industrial Single Board contains sensitive electronic

components that can be easily damaged by the static electricity.

We have described the precautions in this section. And please pay

attention when unpacking, as well as during installation. It is very

important that the instructions to be followed correctly to avoid the static

damage and to have a successfully installation.

The system board can be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as

the anti-static mat.

Be sure that there are no shipping and handling damages on the board

before unpacking.

After opening the packing box, extract the board and place it only on a

grounded anti-static surface material with the component side up.

Again, inspect the board for damages. Press all the sockets IC’s to make

sure they are properly seated. Do this only when the board is placed on a

anti-static’s firm and lat surface.

Note：DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

You are now ready to install your HS-5010 Industrial Single Board.

2.3 Jumper Description

This board’s default jumpers are present at the factory. If you want to

change the HS-5010’s configuration, please follow the instructions.

A jumper switch is closed（sometimes referred to as shorted with a plastic

cap inserted over two pins of the jumper）. A jumper is open with a plastic

cap inserted over one or no pin of the jumper. Figure 2.2 below shows

different jumper settings which will be used in this chapter.

Inhaltsverzeichnis

Andere Boser Einplatinencomputer Handbücher

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung

Lanner electronics

Lanner electronics IAC-F847 Series Bedienungsanleitung