Boss Audio Systems BV9561B Bedienungsanleitung

Full iPod Control

WITH Dual Front and Rear USB and SD

Memery Card Ports and Front Panel AUX Input

( )

WITH DUAL FRONT AND REAR USB

AND SD MEMORY CARD PORTS

AND SIDE PANEL AUX INPUT

( )

WITH DUAL FRONT AND REAR USB

AND SD MEMORY CARD PORTS

AND SIDE PANEL AUX INPUT

( )

BV9561B

INSTRUCTIONS

CONTENTS

Panel Introduction 02

Basic Functions 03

Remote Control Function 05

Turn the Unit On/Off 07

Enter into the Main Interface 07

Play SD card/USB memory device 07

Radio Function Operation 08

Disc Function Operation 09

Play/Eject Disc 09

DVD/VCD Disc Playback 09

CD Disc Playback 09

MP3/WMA Format Disc Playback 09

Touch Menu Function 09

Bluetooth Function Operation 11

General setting 13

Language Setup 13

Video Setup 13

Audio setting 14

Steering Wheel Setup 14

Touch calibration 14

Wiring Diagram 16

Trouble shooting 16

Accessory

Specifications

Time setting 13

External input operation 12

Other Function Operations 12

Rear view function 12

DVD Parental control function

ACCESSORY

DVD Parental control function：The default set

for DVD is #8 adult, which means all grades of

DVD can be read without entering password.To

change the default grade,you need to follow the

below procedure: Press SETUP button on the

remote, display will show the system set up menu

and the submenu,select password and enter

0000, you will be able to choose the DVD

grade as default.

DVD Parental control function

Warning:

To ensure safety while driving and to comply with laws, drivers should not watch video

or operate the video device while driving.

INSTRUCTIONS INSTRUCTIONS

1702

This unit is with switchable frequency.

You can switch from USA frequency to Europe frequency by following the

below steps:

Step1. In main menu, press setup icon to enter the setup interface.

Step2. Press the Radio icon,and insert password 123456, then press “OK”,

the menu from which you can select the radio frequency will show.

Step3. Press “Radio region” and select the desired frequency by pressing the "up"

and "down" arrow, then press it and setting is finished.

Panel Introduction

3. DBAS Button

Eject

11.

10.

INSTRUCTIONS

BASIC FUNCTION

INSTRUCTIONS

WIRING DIAGRAM

This player is equipped with ISO standard connector, please follow below instruction:

● Yellow – 12 V Constant

● Black – Ground wire

● Blue - Power Antenna / Remote Amp Turn On

● Orange – Back-Up Camera Trigger (+) ● Pink – Parking Brake (-)

● White/White black - Left front speaker (+/-)

● Purple/Purple black - Right rear speaker (+/-)

● Green/Green black - Left rear speaker (+/-)

● Red - ACC ON (+12V) ● Grey/Grey black - Right front speaker (+/-)

TROUBLE SHOOTING

PROBLEM CAUSE SOLUTION

After ignition switch

off ,setting

information all lose

Reset information and save

Change battery or fuse

Cannot power on

Change fuse same as the old one

Some factors cause MPU

wrong operation

Press RES button on the panel by

penpoint, then, power on

Poor performance

of radio station

Connot load disk There is a disk inside Remove disc before inserting another one

Weak signal Move the car to another place, then research

Cannot play disc

Disc is scratched Change new disc

Put wrong side of disc into

the unit Insert in the disk with sign side up

Clean lens by lens clean disc

Lens is dirty

Cannot switch

language/subtitle There is only one language/

subtitle in disc

If disc is not with multi-language/subtitle,

it cannot switch language/subtitle

No image Other factors cause MPU

wrong operation Press [RES] button on the panel by

penpoint, then, power on

Cannot watch

image during

driving

It’s not allowed to watch image

during driving

Park the car in a safe place, put the car stall

in “ P ” postion, pull up the hand brake,

parking brake wire must be grounded

Check fuse

8 Dual (front and rear)USB

Warning :You can only use either front or rear USB at a time.Never connect both

front and rear USB at the same time! This could cause malfunctions.

11.AUX

Insert AUX input cable,then press AUX icon enters AUX mode.

3. DBAS Button

Press this button to bass on/off.

Eject

10.

14 12

12.

13.

14.

INSTRUCTIONS

INSTRUCTIONS INSTRUCTIONS

REMOTE CONTROL FUNCTION

Click icon on setup interface to access audio setting interface, as shown in

diagram:

right(PIC 1)

Audio setting

You can turn on or turn off the existing functions on audio setting interface.

Steering wheel setting

II.Connect anode and cathode of direction control wire of the car with anode and cathode of

direction control wire of this device, and press the buttons on steering wheel one by one

and record the corresponding sequence and functions.

III. Click the button of steering wheel needs to be allotted so as to select the corresponding

setting function, such as volume +.

I. Click icon on setup interface so as to access steering wheel setting interface.

IIII. Buttons on steering wheel shall display the corresponding functions, such as volume + .

To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat

procedures 3~4 for resetting.

To modify function settings, repeat procedures 3~4.

Touch calibration

If touch calibration error occurs, you can adjust the touch coordinate by “Touch calibration”.

Click icon on setup interface, input password [888888] to confirm to access touch

calibration interface, as shown in below diagram:

Touching methods

Use touch pen to click the center of “+” icon, and move along with center of “+” icon so as

to calibrate the screen. It shall automatically save data and exit after screen calibration.

Please accurately click all positions on screen, or the accuracy of touch calibration shall be

affected.

PIC 1

CLASSIC

5.SEEK+ ( )/ SEEK- ( )button

In normal playback MP3, USB, SD songs,

press this button to previous song or next

song.

INSTRUCTIONS INSTRUCTIONS

Access setup interface

Click [Setup] icon on main interface to access setup interface.

General setting

Click icon on setup interface to access general setting interface, as shown in below

PIC 1 diagram:

In general setting interface, you can select to turn on or turn off the existing functions.

You can set wallpaper and opening picture you like and check version number of DV/DC,

click icon to browse up/down.

PIC 3

PIC 2PIC 1

Wallpaper selection

Click icon on wallpaper bar , direction icon shall pop up, click it to

select wallpaper.

Opening picture

Click icon on opening picture bar , direction icon shall pop up, click it

to select opening picture.

Time setting

Click

PIC 2diagram:

icon on setup interface to access time setting interface, as shown in below

Click icon on time bar time setting interface shall display, as shown in

below PIC 3 diagram:

Click icon beside hour and minute to separately set hour and minute.

Video setting

Click

(PIC 5) diagram:

icon on setup interface to access video setting interface, as shown in right

At video setting interface, you can adjust brightness, contrast, saturation and hue of the video.

Language Setup

During use, you can select your familiar language to display menu by language setup.

Click icon on setup interface to access language setting interface, as shown in right

(PIC 4) diagram:

Click the corresponding icon on the language bar desired to be set so as to switch

the language type, when there are more than 3 languages, direction icon shall pop up,

click it to select your familiar language.

PIC 4 PIC 5

21.UP, DOWN, LEFT, RIGHT, ENTER button

When playing MP3, USB, SD returns to song

menu, up, down selections can be up / " "

button or down / " " key to select up and

down, select and press " " key to confirm.

The selected tracks can be played. Press the

left or right arrow keys to " " or " " key, can

be on the next page function operation.

INSTRUCTIONS INSTRUCTIONS

Turn on/off Host

Insert/eject USB storage device

1. Connect a USB recorded with media information to the unit by a USB connecting cable.

2. When there is a need to eject the USB device, exit the USB device playback screen

first, and then take out the device.

Insert/eject SD card

1. Insert a SD card recorded with media information into the SD card slot in the unit

correctly until it is locked.

2. When pulling out the SD card, exit SD card playing state first, then press the SD card

and it shall pop up after unlocking.

Enter/exit

Insert a USB storage device or SD card to automatically play data contained in it. If the

unit has connected with a USB device or SD card, touch[ USB ]icon in the main interface

to enter into the external storage playback interface; Touch[ SD ]icon to enter into the SD

card playback interface. During playback, touch the top center area of the screen to pop

up the touch menu, operate touch menu to perform various playback controls.

When there is a USB device/SD card connected,

the unit can conduct the playback of audio/video/

image files in the USB device/SD card.

USB/SD Card function operation

Play

After SD card/USB removable device being read out, the operation methods are similar

to disk operation methods.

When the ignition switch is put in ACC or ON position,Press[ ] button on the front panel

to turn on the unit.After the host starts, hold [ ]button for 3 seconds , the host will turn off.

Access main interface

Touch the function icons so as to access the

corresponding function operations.

In the other mode, click on the interface to return the icon will switch to the main interface.

External input operation

Connect the video input plug with external video input jack, and connect the audio input

plug with external audio input jack.

Touch [Input] icon on main interface to access external input interface.

Audio You can adjust the

You can adjust the speaker volume by adjusting the front and back,left and right column.

volume, bass, pitch for input audio.

Video You can adjust the brightness, contrast, saturation and hue for input video.

You can also choose the video standard mode.

NO VIDEO SIGNAL

Other functions

Rear view function

In any running state, the video signal can switch to reverse video state when reversing the

car, and the system shall return to its initial running state after reversing the car.

Do not rely on CCD system completely, please make sure you use direct eyesight while

driving.Back rearview system only assists in driving. As the distance range of rearview

system is limited, completely relying on the rearview system during driving may cause

accidents.

Reverse field simulation Rearview backup image

Warning

INSTRUCTIONS INSTRUCTIONS

Bluetooth Function Operation

Operation methods:

Set the host to be matching state, and open the Bluetooth of your mobile phone and use

the mobile phone to search device, the mobile phone shall prompt to match password with

the Bluetooth when it has searched the Bluetooth device.

Input Bluetooth password (0000) to the mobile phone and confirm. The mobile phone

shall prompt whether authorize to this device,please select [Yes]. Phone and Bluetooth

shall automatically connect within 20 seconds. Under any working mode, the host shall

convert to Bluetooth state if there is an incoming call. And the host shall restore to current

mode after hanging up.

When the Bluetooth device matches with this device, the connection status shall display

“Connected”, otherwise, it shall display “No connection”.

Touch icon to exit bluetooth interface.

Touch [ Bluetooth ] icon in the main interface to enter the bluetooth interface.

Enter/exit

Pair/link

To use Bluetooth hand-free function, make connection first, i.e. match the host with the

Bluetooth mobile phone.

PIC 3

PLAY/PAUSE

next song

previous song

Bluetooth volume

Click to access Bluetooth volume interface as below PIC 3:

Dialing

You can dial on mobile phone directly or input phone number through the number buttons

on the screen, click to delete if there is input error.

After input the phone number, click to make a call, and click to hang up the phone.

Click during a call so as to switch the voice between car speaker and mobile phone.

Received calls: Touch this button to check all the phone numbers of received calls.

Dialed numbers: Touch this button to check all the dialed phone numbers.

Missed calls: Touch this button to check all the phone numbers of missed calls.

Click to access call records interface as below PIC 2:

Call records

PIC 2PIC 1

Radio Function Operation

Enter/exit

Touch [ RADIO ] icon in the main interface to enter into the radio interface.

Touch icon to return to main interface, and then touch other function icons so as to exit

radio mode.

Click [BND] icon so as to switch among AM1, AM2, bands.FM1,FM2, FM3,

Band selection

Search/Save radio stations

FM band can save 18 radio stations (Six stations for FM1/FM2/FM3), AM band can save

12 radio stations (Six stations for AM1/AM2).

Short press [Scan] icon to browse the stored radio stations.

Scan radio

Short press icon to manually fine-tune radio stations upward/downward.

Long press icon to automatically search and save radio stations.

Sound setting

Click [EQ] icon can switch to different sound mode.

Mute on/off

Click [Mute] icon to turn on/off mute function

TFT on/off

Click icon to turn off TFT, and then click the screen area so as to turn on TFT.

Click icon so as to slide screen angle.

INSTRUCTIONS INSTRUCTIONS

Access next menu

Touch it to access the next menu interface.

Time setting

Touch this button to access time setting interface.

Stereo on/off

Touch it so as to turn on/off stereo.

Return to root menu

Touch this icon, it shall return to root menu of disk in DVD state and access PBC

menu playing in VCD state. All chapters in the disk shall be displayed on the interface,

touch the chapter icon directly for playing.

Access title menu

Press this button to return to title menu of the disk. Directly click menu bar at title

menu interface for playing.

Language selection

Touch this button to select language.

Digit keyboard

Touch this button and digit keyboard shall appear, click number buttons directly to

select tracks for playing.

Randomly play

Touch this button to instantly play each song. Press again to back to the normal play.

Zoom in/Zoom out image

Touch this button to zoom in /zoom out the image.

Repeat play

In playing state, touch this button to start repeat play function: Chapter repeat

Title repeat repeat all Off.

During VCD playing, this function only works when PBC is off.

Disc Function Operation

PIC 1

00:01:44 00:09:43

TT 1/5 CH 1/1

VOL

00:01:44 00:09:43

TT 1/5 CH 1/1

VOL

Do not insert two discs or more.

Eject disc

(1) Click button on the panel to eject the disc.

(2) If a disc has not been took away 15 seconds after it is ejected, system will

automatically take in the disc but not play.

Play/eject disc

Play disc

Insert the disc into the disc slot with the printing surface up, system will detect the disc

and automatically take it in to read and play.

During playback of disc, touch the middle lower area of the screen to pop up the touch

menu, operate the touch menu to perform various playback controls.(PIC 1)

DVD/VCD disc playback

CD Disc Playback

After a CD is inserted, system shall access disc reading state immediately.

When there is a disc in the device, click [Disc] at the main interface so as to access disc

reading state.

After the disc being read out, system shall automatically play in sequence.

Play/pause

Touch the button to pause, retouch it to continue to play.

Stop

Touch the button to enter into prestop status.

Touch the button to select the previous/next song.

The previous/next song

Touch Menu Function Description

Fast forward/backward

Consecutively touch this button to select the speed of fast-forward/fast-backward.

Volume adjustment button

Touch this button and volume adjustment modulation shall pop up, touch button to

adjust the volume.

MP3/JPEG/MPEG4 disk playing

When the disc contains readable files, such as MP3/JPEG/MPEG4 files, it shall be

automatically read out and played after slipping into DVD player.

During playing, touch the screen area and the touch menu shall pop up. Operate the

touch menu for various playing.

Andere Handbücher für BV9561B

Inhaltsverzeichnis

Andere Boss Audio Systems Doppel-DIN-Einbau-AM/FM-DVD/MP3/CD-Receiver Handbücher

Boss Audio Systems

Boss Audio Systems BV9566BI Bedienungsanleitung