Bounty Hunter THE COMMANDO Bedienungsanleitung

OWNER’S MANUAL

Important Facts to Know

about your Metal Detector.

1. This is a MOTION detector.

You must sweep the searchcoil from side-to-side to

detect metal.

A motionless searchcoil over a metal object will not

result in detection.

2. Do not use indoors. Detector is for outdoor use only.

Household appliances emit electromagnetic fields, which can interfere with your

detector. If conducting an indoor demonstration, turn the sensitivity down and

keep the searchcoil away from appliances such as microwaves, computers and

televisions. If your detector beeps erratically, turn off appliances and lights.

Do not test by placing coins on the floor. Most floors contain metal.

Keep the searchcoil away from floors, walls, and tables, which can contain

metal.

3. Use 9-volt ALKALINE batteries only.

Do not use Heavy Duty batteries.

Do not use ordinary Zinc-Carbon batteries.

4. Adjust sensitivity to a low level in the event of false signals

Always begin use at reduced sensitivity.

Increase to full sensitivity after you are familiar with the detector’s operation.

ACCESSORIES

FOR COMPLETE DETAILS VISIT WWW.DETECTING.COM • 1-800-413-4131

Carry Bag ......

$ 29.95

Rugged double-stitched construction - CBAG-W

Pouch & Digger Combo ......

$ 24.95

Pouch with 2 large pockets & 9” heavy duty digging tool. TP-KIT-W

Bounty Hunter Stereo Headphones

......

$ 39.95

Use with Bounty Hunter metal detectors. Lightweight and adjustable with

true stereo sound, adjustable volume, 1/8 jack with 1/4 adaptor,

4’ cable.

HEAD-W

Pin Pointer ......

$ 69.95

Pinpoints the exact location of buried metal objects. Audio signal indicator

and vibrator. Runs on 1 – 9-Volt Battery. PIN POINTER-W

Sand Scoop......

$ 24.99

Large scoop with filtering holes. Made of strong plastic. SAND SCOOPBH

9” Heavy-Duty Digging Tool

......

$ 10.95

Metal blade with comfortable plastic handle and depth gauge TROWEL-2

Digging Tool ......

$ 7.95

Light and practical wide blade digging tool. TROWEL-W

Bounty Hunter T-Shirt

......

$ 19.99

100% cotton with Bounty Hunter®Logo. Sizes – LG, XL & XXL

Bounty Hunter Baseball Cap

......

$ 14.95

One size fits all, with Bounty Hunter®logo.

Gold

Prospecting Kits

$ 29.99 $ 59.99 $ 109.99

MTKCAMO Rev.2 052412

INTRODUCTION

The Commando is a user-friendly instrument, requiring only a mini-

mum of operator skill, yet delivering effective performance over a wide

range of conditions and applications.

Streamlined in appearance,

with only two operating

knobs and a mode selection

switch, the Commando has

eliminated the two most

difficult aspects of metal

detector operation, Tuning

and Ground Balancing. Both

of these functions are automatic

with the Commando.

The Commando will detect

in extreme ground conditions,

ranging from salt (for beach

hunting) to black sand (for

gold prospecting), with no

operator adjustments to the

circuitry and with no loss of

sensitivity.

From salt water beach

conditions to black sand

deposits common at gold

prospecting locations, the

Commando sees

through the earth’s

naturally

occurring

minerals to find

buried metals.

FEATURES

Headphone Jack

Three-Position

Toggle Switch

S-Rod

Handle

System

Meter System

Detector

Stand

Comfort

Hand-grip

Padded

Armrest

Discriminate

Control

Sensitivity Control

Interchangeable

Coil System

TREASURE HUNTER’S CODE OF ETHICS:

• Always check Federal, State, County and local laws before searching.

• Respect private property and do not enter private property without the owner’s

permission.

• Take care to refill all holes and leave no damage.

• Remove and dispose of any and all trash and litter found.

• Appreciate and protect our inheritance of natural resources, wildlife and private property.

• Act as an ambassador for the hobby, use thoughtfulness, consideration and

courtesy at all times.

• Never destroy historical or archaeological treasures.

• All treasure hunters may be judged by the example you set; always conduct yourself

with courtesy and consideration of others

First Texas Products, LLC

1465-H Henry Brennan

El Paso, TX 79936

PH: (915) 633-8354

Fax: (915) 633-8175

MSS2B - 093010

FIRST TEXAS PRODUCTS, LLC

5-YEAR LIMITED WARRANTY

inclusion of brief quotations in a review.

Published by First Texas Products, L.L.C.

Bounty Hunter® and Pioneer® are registered trademarks of First Texas Products, L.L.C.

www.detecting.com

Bounty Hunter Metal Detectors are warranted against defects in

workmanship or materials under normal use for five years from

date of purchase to the original user. Liability in all events is

limited to the purchase price paid. Liability under this Warranty is

limited to replacing or repairing, at our option, any Bounty Hunter

Detector returned, shipping cost prepaid, to First Texas Products,

LLC. Damage due to neglect, accidental damage or misuse of this

product is not covered by this warranty.

Proof of purchase is required to make a claim under this warranty.

NOTE TO CUSTOMERS OUTSIDE THE U.S.A.

This warranty may vary in other countries, check with your distributor for details.

Factory warranty follows the channel of distribution.

Warranty does not cover shipping costs

According to FCC part 15.21 Changes or Modifications made to this device not expressly approved by the party

responsible for compliance could void the users authority to operate this equipment.

METAL DETECTING APPLICATIONS (cont.)

USING HEADPHONES

Using headphones (not included) improves battery life, and prevents the

sounds from annoying bystanders.

It also allows you to hear subtle changes in the sound more clearly,

particularly if searching in a noisy location. For safety reasons, do not use

headphones near traffic or where other dangers are present.

This device is to be used with interconnecting cables/headphone cables

shorter than three meters.

trash items. Gold rings will induce a low sound. Be aware that some

pull-tabs can also induce a low tone.

Silver will induce a high tone. Chains and necklaces are difficult to

find. If you are looking for gold rings, don’t get discouraged; you

will dig up many broken pull-tabs before you find your first gold

ring!

HOUSEHOLD APPLICATIONS

Find property markers, lost keys, machine parts, and other lost

items..

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in center position.

●

2Discriminate control knob is in OFF position.

GOLD PROSPECTING

Find gold in abandoned gold mines and river beds where gold is

continuously washed down stream from its place of origin.

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in center position.

●

2Discriminate control knob is in OFF position.

EASY ASSEMBLY

Assembly is easy and requires no tools.

●

1Position detector upright.

●

2Rotate the LOCKING

COLLAR fully in a counter

clockwise direction.

●

3Insert your finger inside the

tube and make sure the

INTERNAL CAM LOCK is

flush with the inside of the

tube.

●

4Insert the LOWER STEM into

the S-ROD.

●

5Rotate the LOWER STEM until the SILVER BUTTON locates in the hole.

●

6Twist the LOCKING COLLAR fully in the clockwise direction until it locks.

●

7If your detector has 3 tubes and 2 locking collars, repeat this process

on the Middle Stem.

●

8Position the Lower Stem (the straight tube) with the Silver Button

toward the back. Using the Bolt and Knurled Knob, attach the

Searchcoil to the plastic extension protruding from the Lower Stem.

●

9Press the button on the upper end of the Lower Stem, and slide the

Lower Stem into the S-Rod.

Adjust the Stem to a length that lets

you maintain a comfortable upright

posture, with your arm relaxed at

your side, and the Searchcoil parallel

to the ground in front of you.

●

10 Wind the Cable securely around the

Stem.

●

11 Insert the Plug into the matching

Connector on the right underside of

the Detector Body. Be sure that the

key-way and pins line up correctly.

Caution: Do not force the plug in. Excess

force will cause damage.

To disconnect the cable, pull on

the plug.

Do not pull on the cable.

S-Rod

Connector Plug

Detector

Body

S-ROD

LOCKING

COLLAR

INTERNAL

CAM LOCK

SILVER BUTTON

MIDDLE

STEM

S-ROD MIDDLE STEM

Connector

on back of

unit Body

METAL DETECTING APPLICATIONS

COINSHOOTING

The most popular application for metal detectors

CONTROL SETTINGS REQUIRED:

●

1Toggle switch to the left (disc. mode).

●

2Discriminate knob at 3:00 (3/4 turn).

Only silver, copper and brass will be detected. Gold items will be

eliminated. Different denominations of coins will induce different

sounds.

RELIC HUNTING

A relic is a historical object, sometimes of great value. The most effective

method for locating relics is to first conduct historical research. Visit your local

library to learn of historical events having occurred in your area. You can then

target your search to a specific area and gain valuable insight into your local

history.

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in center position.

●

2Discriminate knob is in OFF position.

CACHE HUNTING

A cache, pronounced

“cash”

, is a buried or hidden valuable stored

inside a case, can, strong box, or a bag. A cache could be the loot

from a bank robbery or just someone’s life savings. A cache is often

hidden in the floor or walls of an old house, or is buried nearby. Also

search old camp sites.

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in center position.

●

2Discriminate knob is in OFF position.

JEWELRY HUNTING

Jewelry can be found wherever people congregate. Beaches, parks,

school yards and fair grounds are all littered with lost jewelry.

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in RIGHT position (tone mode).

●

2Discriminate knob at half way, 12:00 position.

You should dig only the lower and high tones. Broken tones indicate

BATTERIES

IMPORTANT: Always use ALKALINE batteries for optimal

performance.

Always remove the batteries for prolonged storage.

CHECK THE BATTERIES if your detector exhibits any of the

following symptoms:

●

1The unit does not turn on.

●

2Low speaker volume.

●

3Unit beeps continuously at low sensitivity setting.

The Low Battery indicator light will come on and stay on if the

batteries are discharged. It should flash momentarily when the

Power Switch is turned off.

IMPORTANT: Your Commando metal detector requires two 9-Volt

ALKALINE batteries.

Follow these steps to install the batteries.

●

1Carefully remove the battery

compartment door by pressing

the release clip on the right side

of the door.

●

2Snap one battery onto each of the

terminals and place the batteries

inside the compartment. Insert

batteries with the terminals facing

inward.

●

Replace the compartment door

by carefully inserting opposite

side of clip first. Then press down

on clip side until battery door

snaps into place.

Battery

terminals facing in

Release

Clip

COINSHOOTING

The most popular application for metal detectors

CONTROL SETTINGS REQUIRED:

●

1Toggle switch to the left (disc. mode).

●

2Discriminate knob at 3:00 (3/4 turn).

Only silver, copper and brass will be detected. Gold items will be

eliminated. Different denominations of coins will induce different

sounds.

RELIC HUNTING

A relic is a historical object, sometimes of great value. The most effective

method for locating relics is to first conduct historical research. Visit your local

library to learn of historical events having occurred in your area. You can then

target your search to a specific area and gain valuable insight into your local

history.

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in center position.

●

2Discriminate knob is in OFF position.

CACHE HUNTING

A cache, pronounced

“cash”

, is a buried or hidden valuable stored

inside a case, can, strong box, or a bag. A cache could be the loot

from a bank robbery or just someone’s life savings. A cache is often

hidden in the floor or walls of an old house, or is buried nearby. Also

search old camp sites.

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in center position.

●

2Discriminate knob is in OFF position.

JEWELRY HUNTING

Jewelry can be found wherever people congregate. Beaches, parks,

school yards and fair grounds are all littered with lost jewelry.

CONTROL SETTINGS REQUIRED:

●

1Toggle switch in RIGHT position (tone mode).

●

2Discriminate knob at half way, 12:00 position.

You should dig only the lower and high tones. Broken tones indicate

Both Batteries

terminals

facing in

CARE AND MAINTENANCE

Your Commando Metal Detector is an example of superior design and

craftsmanship. The following suggestions will help you care for your

metal detector so that you can enjoy it for years.

Handle the metal detector gently

and carefully. Dropping it can

damage electronic components.

Use and store the metal detector

only in normal temperature

environments. Temperature

extremes can shorten the life of

electronic devices and distort or

melt plastic parts.

Wipe the metal detector with a

damp cloth occasionally to keep

it looking new. Do not use harsh

chemicals, cleaning solvents, or

strong detergents to clean the

metal detector.

The coil is waterproof and may

be submerged into either fresh or

salt water. Be careful to prevent

water from entering the control

housing. After using the coil in

salt water, rinse it with fresh

water to prevent corrosion of the

metal parts.

Commando DEMONSTRATION

Here is a quick way to demonstrate the basic features of your Commando.

I. Supplies Needed

• A quarter (25¢)

• A nickel (5¢)

• A Penny (1¢)

• A small piece of aluminum foil

• A Nail

II. Position your Commando

• Place the detector on a table, with the search coil hanging over the edge.

• Be sure that the search coil is far away from walls or metal objects. Keep the search coil away

from any metal in the table.

III. Beginning Switch Settings

• Right Knob (Discriminate) – LOW

• Toggle Switch – Middle Position

• Turn detector on with "Sensitivity"

knob set to 3:00 position

• Reduce "Sensitivity" in case of interference

IV. All Metal Detection

Wave all objects over the search coil

• NOTICE THE SINGLE TONE

V. Tone Mode Detection

A. Move toggle switch to the right position – TONE

B. Turn the "Discriminate" knob to 2:00 (about 3/4 turn)

C. Sweep all of the different objects back and forth under the

search coil

• NOTICE THE DIFFERENT TONES

• NOTICE THE METALS REJECTED

VI. Disc Mode Detection

A. Move the toggle switch to the left position – DISC

B. Turn the "Discriminate" knob to LOW

C. Sweep all of the different objects back and forth under the

search coil.

• NOTICE THE METALS REJECTED

D. Turn the "Discriminate" knob slowly to the right while

sweeping all of the different objects at different settings.

• NOTICE THE DIFFERENT TONES

• NOTICE THE METALS REJECTED

TOGGLE SWITCH

ALL METAL

TONE

FULL DISC

The Commando is a “motion” detector. This means that the

search coil must be moving to detect the presence of metal. When

practicing with a stationary metal detector, keep the target moving

over the coil. Objects held still under the search coil will not be

detected.

THREE MODES OF OPERATION

The Commando allows for three modes of operation:

ALL METAL, TONE AND FULL DISCRIMINATE

After turning the unit on, and adjusting your Sensitivity to the

desired setting, you're now ready to decide on your mode of

operation.

ALL METAL:

(Toggle Switch in the Middle)

In this mode, all

different types of metal will be detected such as: iron, steel,

aluminum, brass, silver, copper and gold. Applications: Relic

Hunting, Gold Prospecting, Cache Hunting and general applications

such as property marker locating. This mode provides maximum

depth detection capability.

FULL DISCRIMINATE:

(Toggle Switch to the Left)

When using the

Full Discriminator, most trash items will be automatically rejected.

Adjust the DISCRIMINATE control higher to increase the range of

discrimination.

TONE DISCRIMINATE:

(Toggle Switch to the Right)

When using

the Tone Discriminator, a unique dual tone “beep” and automatic iron

rejection makes finding treasure fun and easy. It's also possible to

achieve a broken tone for certain pull-tabs by adjusting your

Discriminate control to the approximate center position (12:00).

With the two-tone discrimination, along with a broken tone for

pull-tabs, you will be able to identify types of buried metals

according to the audio tones emitted. Applications: Coinshooting,

Jewelry Hunting and detecting in highly trashed areas.

OPERATION

TROUBLESHOOTING

The following troubleshooting steps may assist you in case you’re

having problems with your Commando.

YOUR DETECTOR IS EMITTING ERRATIC SIGNALS

WHEN YOU’RE IN THE FIELD.

Your SENSITIVITY may be set too high.

Try reducing the SENSITIVITY slightly

until the false signaling disappears.

Remember to swing your coil slowly.

Some inconsistent signals will occur on

highly rusted metals. If the signal does not

repeat after successive passes of the coil

over the same area, then the target is usually not worthwhile.

Natural and man-made electromagnetic fields can cause interference.

YOUR DETECTOR IS NOT STABLE AND HAS A PULSING, DISTORTED

TONE INSTEAD OF A CLEAR TONE.

This can occur if you’re operating near another detector or near power

lines that can interfere with the detector’s operating frequency.

YOUR DETECTOR IS EMITTING A CONSTANT LOUD TONE OR

CONSTANT REPEATING TONES

This usually occurs when the batteries are low. Try replacing your

batteries with two new alkaline batteries.

NOTE:

Always use Alkaline Batteries for proper performance.

IN THE FIELD (cont.)

PINPOINTING

Accurate pinpointing takes practice and is best accomplished by

“X-ing” the suspected target area.

●

1Once a buried target is identified by a good tone response,

continue sweeping the coil over the target in a narrowing

side to side pattern.

●

2Take visual note of the place on the ground where the

“beep” occurs as you move the coil slowly from side to

side.

●

3Stop the coil directly over this spot on the ground.

●

4Now move the coil straight forward and straight back

towards you a couple of times.

●

5Again make visual note of the spot on the ground at which

the “beep” occurs.

●

6If needed, “X” the target at different angles to “zero in” on

the exact spot on the ground at which the “beep” occurs.

REMEMBER: The detector will beep just as the center of the

search coil passes directly over the buried object.

If you have difficulty pinpointing very strong signals, try lifting

the coil higher off the ground until a weaker, but more concise,

signal is heard. For very weak signals, try moving the coil in

short quick sweeps, closer to the ground.

WHAT

READS

LIKE THIS

…MAY

ACTUALLY

BE THIS

OPERATION

TONE MODE AUDIO RESPONSES

RESPONSE

Iron & Steel

LOW

TONE

Gold & Nickel

BROKEN

TONE

Old & New Pull Tabs

HIGH

TONE

Copper, Silver & Brass

TONE DISCRIMINATION

(continued)

(Toggle switch to the Right)

Classifies

detected metal objects by emitting a low

or high tone.

Adjust the DISCRIMINATE control higher to

increase the range of the low tone. It is

possible to set the DISCRIMINATE level so

that nickels have a low tone, larger coins

have a high tone, and pull-tabs have a low

tone or in-between “broken” tone. The

"broken" tone makes pull-tabs and trash easily recognizable.

Sensitivity will be reduced slightly when

using the Commando in the Tone

Discrimination mode. If you want optimal

depth capability, operate in the All Metal

mode by turning the Discriminate control

completely counterclockwise; then turn the

Sensitivity control clockwise to its highest

clockwise position without chatter. If your

Commando chatters or beeps erratically,

reduce the Sensitivity by turning the left

knob counterclockwise.

STANCE

Stand with your arm extended in front of

your body. Don’t bend or stoop; stand in a

comfortable position. Hold the unit so that

the search coil is about 1/2-inch above the

ground. Adjust the search coil so that it is

parallel to the ground.

SWEEP

Standing in the search position,

swing the search coil gently from

side to side, slightly overlapping

each sweep as you move

forward. Keep your search coil

approximately 1/2-inch above

the ground as you search.

Raising it during the sweep ,

or at the ends of your

sweep, can cause false

readings. Move slowly;

hurrying will cause you

to miss targets.

Most desireable objects will respond with a repeatable tone. When

discriminating, iron and foil objects generally do not respond. False

signals can be caused by trashy ground, electrical interference, or by large

irregular trash objects. These signals are easily recognized by their often

broken or non-repeatable nature.

IN THE FIELD

CORRECT WRONG

OPERATION

AUTO GROUIND CONTROL:

The Commando automatic Ground Track feature allows operation

in virtually all soil conditions, regardless of mineral content.

Use it effectively on the beach or for gold prospecting. In the ALL

METAL Mode (Toggle switch in the middle), the Commando will

detect gold nuggets through black sand and will find deeply buried

relics in all types of soil.

OPERATING TIPS:

Turn the detector on using the left knob. NOTE: The detector will remain

silent when turned on. It will emit sound when metal passes beneath

the search coil.

As the left knob is clicked on, it will be at the lowest sensitivity

setting. Turning the control knob toward "HIGH" increases

sensitivity to small or deeply buried objects. If the unit “chatters”,

reduce the sensitivity slightly, until the chatter stops.

For maximum performance, operate with the sensitivity as high as

possible. The sensitivity can generally be set higher when operating

in Full Discriminate (DISC) or Tone Discriminate (TONE) modes.

STANCE

Stand with your arm extended in front of

your body. Don’t bend or stoop; stand in a

comfortable position. Hold the unit so that

the search coil is about 1/2-inch above the

ground. Adjust the search coil so that it is

parallel to the ground.

SWEEP

Standing in the search position,

swing the search coil gently from

side to side, slightly overlapping

each sweep as you move

forward. Keep your search coil

approximately 1/2-inch above

the ground as you search.

Raising it during the sweep ,

or at the ends of your

sweep, can cause false

readings. Move slowly;

hurrying will cause you

to miss targets.

Most desireable objects will respond with a repeatable tone. When

discriminating, iron and foil objects generally do not respond. False

signals can be caused by trashy ground, electrical interference, or by large

irregular trash objects. These signals are easily recognized by their often

broken or non-repeatable nature.

IN THE FIELD

CORRECT WRONG

OPERATION

AUTO GROUIND CONTROL:

The Commando automatic Ground Track feature allows operation

in virtually all soil conditions, regardless of mineral content.

Use it effectively on the beach or for gold prospecting. In the ALL

METAL Mode (Toggle switch in the middle), the Commando will

detect gold nuggets through black sand and will find deeply buried

relics in all types of soil.

OPERATING TIPS:

Turn the detector on using the left knob. NOTE: The detector will remain

silent when turned on. It will emit sound when metal passes beneath

the search coil.

As the left knob is clicked on, it will be at the lowest sensitivity

setting. Turning the control knob toward "HIGH" increases

sensitivity to small or deeply buried objects. If the unit “chatters”,

reduce the sensitivity slightly, until the chatter stops.

For maximum performance, operate with the sensitivity as high as

possible. The sensitivity can generally be set higher when operating

in Full Discriminate (DISC) or Tone Discriminate (TONE) modes.

IN THE FIELD (cont.)

PINPOINTING

Accurate pinpointing takes practice and is best accomplished by

“X-ing” the suspected target area.

●

1Once a buried target is identified by a good tone response,

continue sweeping the coil over the target in a narrowing

side to side pattern.

●

2Take visual note of the place on the ground where the

“beep” occurs as you move the coil slowly from side to

side.

●

3Stop the coil directly over this spot on the ground.

●

4Now move the coil straight forward and straight back

towards you a couple of times.

●

5Again make visual note of the spot on the ground at which

the “beep” occurs.

●

6If needed, “X” the target at different angles to “zero in” on

the exact spot on the ground at which the “beep” occurs.

REMEMBER: The detector will beep just as the center of the

search coil passes directly over the buried object.

If you have difficulty pinpointing very strong signals, try lifting

the coil higher off the ground until a weaker, but more concise,

signal is heard. For very weak signals, try moving the coil in

short quick sweeps, closer to the ground.

WHAT

READS

LIKE THIS

…MAY

ACTUALLY

BE THIS

OPERATION

TONE MODE AUDIO RESPONSES

RESPONSE

Iron & Steel

LOW

TONE

Gold & Nickel

BROKEN

TONE

Old & New Pull Tabs

HIGH

TONE

Copper, Silver & Brass

TONE DISCRIMINATION

(continued)

(Toggle switch to the Right)

Classifies

detected metal objects by emitting a low

or high tone.

Adjust the DISCRIMINATE control higher to

increase the range of the low tone. It is

possible to set the DISCRIMINATE level so

that nickels have a low tone, larger coins

have a high tone, and pull-tabs have a low

tone or in-between “broken” tone. The

"broken" tone makes pull-tabs and trash easily recognizable.

Sensitivity will be reduced slightly when

using the Commando in the Tone

Discrimination mode. If you want optimal

depth capability, operate in the All Metal

mode by turning the Discriminate control

completely counterclockwise; then turn the

Sensitivity control clockwise to its highest

clockwise position without chatter. If your

Commando chatters or beeps erratically,

reduce the Sensitivity by turning the left

knob counterclockwise.

Andere Handbücher für THE COMMANDO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bounty Hunter Metalldetektor Handbücher

Bounty Hunter

Bounty Hunter Fast Tracker Bedienungsanleitung

Bounty Hunter

Bounty Hunter Outback Bedienungsanleitung

Bounty Hunter

Bounty Hunter Quick Draw Pro Bedienungsanleitung

Bounty Hunter

Bounty Hunter Land Star Bedienungsanleitung

Bounty Hunter

Bounty Hunter Time Ranger Bedienungsanleitung

Bounty Hunter

Bounty Hunter HandyMan Nail Finder S3019-H Bedienungsanleitung

Bounty Hunter

Bounty Hunter Lone star Pro Bedienungsanleitung

Bounty Hunter

Bounty Hunter Snooper 2 Bedienungsanleitung

Bounty Hunter

Bounty Hunter DISCOVERY 3300 Bedienungsanleitung

Bounty Hunter

Bounty Hunter DISCOVERY 3300 Bedienungsanleitung

Bounty Hunter

Bounty Hunter Quick Silver Bedienungsanleitung

Bounty Hunter

Bounty Hunter Land Ranger Bedienungsanleitung

Bounty Hunter

Bounty Hunter Lone Star Bedienungsanleitung

Bounty Hunter

Bounty Hunter Lone Star Bedienungsanleitung

Bounty Hunter

Bounty Hunter Land Ranger PRO Bedienungsanleitung

Bounty Hunter

Bounty Hunter DISCOVERY 1100 Bedienungsanleitung

Bounty Hunter

Bounty Hunter GOLD DIGGER Series Bedienungsanleitung

Bounty Hunter

Bounty Hunter Platinum Bedienungsanleitung

Bounty Hunter

Bounty Hunter titanium Camo Bedienungsanleitung

Bounty Hunter

Bounty Hunter Quick Draw Bedienungsanleitung

Bounty Hunter

Bounty Hunter Tracker II Bedienungsanleitung

Bounty Hunter

Bounty Hunter pioneer 101 Bedienungsanleitung

Bounty Hunter

Bounty Hunter Platinum Bedienungsanleitung

Bounty Hunter

Bounty Hunter Sharp Shooter II Bedienungsanleitung

Beliebte Metalldetektor Handbücher anderer Marken

Garrett

Garrett MAGNASCANNER CS 5000 Bedienungsanleitung

Valex

Valex 1800200 Bedienungsanleitung

Gauss

Gauss MIL MD Bedienungsanleitung

Velleman

Velleman CS130 Bedienungsanleitung

Sears

Sears 321.596370 Bedienungsanleitung

Eriez

Eriez X8 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-22 Bedienungsanleitung

Zircon

Zircon MetalliScanner m60c Bedienungsanleitung

nalanda

nalanda MD027 Bedienungsanleitung

REV Ritter

REV Ritter CB-7005 Bedienungsanleitung

Minelab

Minelab F1A4 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs F70 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-12 Bedienungsanleitung

GOLDEN MASK

GOLDEN MASK 5 Bedienungsanleitung

Grizzly

Grizzly YM 203 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Bedienungsanleitung

Treasure Cove

Treasure Cove Vibra-Probe 560 Bedienungsanleitung

Accurate Locators

Accurate Locators XL16 IMAGER Bedienungsanleitung