BOXLIGHT ProColor 70 Bedienungsanleitung

151 NE State Route 300, Suite A,

PO Box 2609, Belfair, Washington, 98528 Phone: 360.464.2119

www.boxlight.com

The

Boxlight

Ultimate

Untethered

Classroom

Setup Guide for the

ProColor 70” IFP mounted to the

Rainier Mobile Cart

151 NE State Route 300, Suite A,

PO Box 2609, Belfair, Washington, 98528

BOXLIGHT phone: 360.464.2119

www.boxlight.com

text ‘setup’ to 51555

What’s included

NOTE: There are 4

boxes for setup of

ProColor panel on

Rainier Mount. Contents

vary. Please refer to box

number when going

through setup guide.

Box #1

NOTE: Box #1

contains a smaller

box that houses

the controller &

velcro strips.

Please set aside

for later use.

NOTE: Unlisted

parts are not needed

for setup.

M8 x 75 6mm

Allen Head Screw

M6 x 75 4mm

Allen Head Screw

M8 x 40 6mm

Allen Head Screw

M8 x 40 5mm

Fringed

Allen Head Screw

x 4

M8 Nut

8mm

Washer

x12

Vesa Brackets x2

Frame x1 Mounting Bracket x1

Rainier Controller x1

w/ Velcro Strips

IMPORTANT:

If you did not receive

this bolt, you have

“Package A” and may

proceed with next steps.

If you did receive this

bolt, you have “Package

B” and will need to use

the M8 x 40 Allen Head

Screws (x4) that are

provided in box #4

(Step 5)

151 NE State Route 300, Suite A,

PO Box 2609, Belfair, Washington, 98528

phone: 360.464.2119

www.boxlight.com

text ‘setup’ to 51555

BOXLIGHT

Box 1 Contents:

Box #2

Trolley x 1

Power Strip

Bag of Zip Ties

Mount Column x1Rainier Power Cord x1

w/ Power Extension Cord x1

This is a top view looking down.

Longer portion of legs face forward

Shorter portion of legs

face backward

M8 x 40

6mm

Allen Head Screw

Box 2 Contents:

Box 3 Contents:

Box 4 Contents:

*Reminder –if you

have package B, use

these bolts for Step 5

151 NE State Route 300, Suite A,

PO Box 2609, Belfair, Washington, 98528

BOXLIGHT phone: 360.464.2119

www.boxlight.com

text ‘setup’ to 51555

Front

Back

Step-by-step setup

4Assemble the Frame

Attach the Mounting Bracket to the Frame using x4 M8 x 75 Allen Head Screws, x4 M8 Nuts, and x4

8mm washers.

Attach Mount Column to Trolley

Open Box #3 and place Trolley upside

down on top of the Mount Column.

Use x4 M8 x 40 Allen Head Screws

(Package A) or x4 M8 x 40 Fringed Allen

Head Screws (Package B), x4 M8 nuts,

and x4 8mm washers to attach the

Trolley to the Mount Column.

Open Box #1 and remove bag of

nuts, bolts, and washers.

Open Box #4 and remove the

x4 M8 x 40 Allen Head Screws

(Package B Only).

Open Box #2 and place

Mount Column upside down on a

flat surface.

Allen Wrenches:

4mm, 5mm, 6mm Phillips Head

Screwdriver Socket Wrench/Wrench:

13mm

What you will need to begin:

151 NE State Route 300, Suite A,

PO Box 2609, Belfair, Washington, 98528

BOXLIGHT phone: 360.464.2119

www.boxlight.com

text ‘setup’ to 51555

NOTE: The outside

of the Vesa Bracket

will enter the 9th

slit from the outside

of the frame.

Place Panel on Mount

Afer locking the front wheels on

the trolley, carefully lift the Panel

and align the Vesa Brackets with

the slits on the top of the Rainier

frame and set the panel on the

frame.

Attach Vesa Brackets to Panel

Remove your ProColor 700H V2

from its packaging and attach the

Vesa Brackets to the back of the

Panel using the 6 screws on the back

of the ProColor 700H Panel.

Attach the Frame to the Mounting Column

Place the trolley wheels on the ground. Attach the completed Frame to the top of the

mountng column. Use x2 M8 x 40 Allen Head Screws and x2 8mm Washers on the back, and x2

M8 x 40 Allen Head Screws on the front. *For Package B, please use M8 x 40 Allen Head Screws

provided in Box #4.

NOTE: 4 people

needed to complete

this step.

151 NE State Route 300, Suite A,

PO Box 2609, Belfair, Washington, 98528

BOXLIGHT phone: 360.464.2119

www.boxlight.com

text ‘setup’ to 51555

10 Attach Power Strip

Remove the zip ties and Power Strip from Box #4.

Attach the Power Strip to the mount, plug it into a wall socket, and proceed to

plug the Rainier Mount into the Power Strip.

Attach Rainier Controller

Locate the Rainier Controller and use the Velcro strips

to fasten the remote to the side of the Panel.

Proceed to plug the controller into the controller port.

Fasten Panel to Mount

Attach x2 M6 x 75 Allen Head Screws and x2

8mm Washers to the back of the frame to lock

the Vesa Brackets onto the Frame.

151 NE State Route 300, Suite A,

PO Box 2609, Belfair, Washington, 98528

BOXLIGHT phone: 360.464.2119

www.boxlight.com

text ‘setup’ to 51555

Inhaltsverzeichnis

Andere BOXLIGHT Monitor Handbücher

BOXLIGHT

BOXLIGHT ProColor Series Bedienungsanleitung

BOXLIGHT

BOXLIGHT ProColor 653U Bedienungsanleitung

BOXLIGHT

BOXLIGHT ProColor 652U Bedienungsanleitung

BOXLIGHT

BOXLIGHT Mimio ProColor Pen Tray Bedienungsanleitung

BOXLIGHT

BOXLIGHT CLEVERTOUCH 75 CM Pro Bedienungsanleitung

BOXLIGHT

BOXLIGHT CLEVERTOUCH CTL-86DS94KV2 Bedienungsanleitung

BOXLIGHT

BOXLIGHT MimioPro 4 Bedienungsanleitung

BOXLIGHT

BOXLIGHT ProColor Bedienungsanleitung

BOXLIGHT

BOXLIGHT MimioDisplay 3 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung