BOXLIGHT CP-300t Bedienungsanleitung

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

Turning ON the projector

•Turn on the computer equipment connected to the projector

NOTE: Make sure the Audio Amp, VCR and Elmo are ON.

Check to make sure that the Teacher’s station/Laptop switch box

setting is set to the desired source (Teacher’s Station or Laptop).

The VCR should be set to channel L1.

•Turn the projector on by pressing the Standby/On (green) button

on the remote control.

•Select the desired external input source (Computer or VCR).

To display the COMPUTER press the RGB button

To display the VCR/ELMO press the VIDEO button

Turning OFF the projector

•Turn the projector off by pressing the Standby/On (green)

button on the remote control. The message POWER OFF

appears on the screen.

•Press the Standby/On (green) button a second time to turn off

the projection unit.

Shutting Down the Computer and Locking the Nova Desk

•Log off/ shut down the computer. Place all remotes inside

of the teacher’s station and lock both doors.

IF YOU ARE EXPERIENCING PROBLEMS IN THIS SMART

CLASSROOM PLEASE CALL THE HELP DESK AT 953-3375

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

If….

•The Computer will not turn on

Then try the following steps…

1) CHECK the POWER SWITCH located INSIDE THE RIGHT

CABINET OF THE NOVA STATION. It should light up RED

to indicate that the computer is receiving power

2) If the Nova station has power, reset the computer by pressing the

reset button on the front of the computer.

3) CHECK THE WALL OUTLET to make sure that the power is

plugged in from the Nova Desk.

4) Check to make sure that the power connection in the back of the

computer is firmly seated.

5) If you are unable to resolve the problem, CALL THE

HELPDESK AT 953-3375. Please use guidelines provided

at the end of this Operations Guide to assist you when

placing a Help Desk call.

If….

•The computer is on but the image is NOT projecting on the

screen

•The VCR is not projecting on the Screen

•The Projector Remote Control Unit does not work

•The Projection Unit will not turn on

Then try the following steps…

1) Turn the projector bulb on by pressing the Standby/On (green)

button on the remote control.

2) When turning on the projector, it takes about 30 SECONDS

TO DISPLAY AN IMAGE. If the IMAGE DOES NOT

APPEAR after 30 Seconds:

3) Turn off the fluorescent lights in the room (they can cause

interference with the remote) and begin at step 1.

Power Switch

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

4) Check that the desired external input source (Computer or VCR)

is selected.

•To display the computer press the RGB button

•To display the VCR/Video Flex Camera press the

VIDEO button

•Make sure the VCR channel is set to L1

5) Make sure that the REMOTE IS WITHIN THE OPERATING

RANGE of the projection unit (walk directly in front of the

projector and begin at step 1).

6) REPLACE the Remote Control BATTERIES (if the remote

control has a laser pointer press to see if the batteries are fully

charged/pointer works).

Sixty

Degrees

60°

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

If….

•You are unable to connect to the Internet/campus network

Then …

Try shutting the computer down and restarting it. If this does not

resolve the problem, CALL THE HELPDESK AT 953-3375.

Use the section at the end of this Operations Guide to assist you

when placing a Help Desk call.

Question:

•How do I get the keypad combination for the Smart

Classroom ?

Answer:

Every faculty member has access to the keypad

combinations by logging into the faculty section of Cougar

Trail https://cougartrail.cofc.edu/). If you are using this

room for a conference or seminar or you are a College of

Charleston staff member, please contact the Registrar’s

Office for assistance. The Office of the Registrar can be

reached by phone at 843-953-5668 or 843-953-4831 or by

E-mail at [email protected].

Please Note: Keypad Codes are confidential and will be changed by

the Registrar’s office if given to students.

Question:

•How do I get a key to the Nova Desk?

Answer:

Each Academic Department has been given their own set of keys to

the Nova Desks. Please contact your department chair to request a

key. If you are using this room for a conference or seminar or you

are a College of Charleston staff member, please contact the

Registrar’s Office for assistance. The Office of the Registrar can

be reached by phone at 843-953-5668 or 843-953-4831 or by E-

mail at registrar@cofc.edu.

Question:

•Is there a “standard smart classroom configuration?”

Answer:

The Department of Academic Computing maintains a current

listing of classroom locations, equipment and contact information

at: http://www.cofc.edu/computingroomlookup. Most Smart

Classrooms on campus are equipped with a: 1) Teacher’s station

computer (Mac or PC), 2) laptop hookup, 3) VCR, 4) DVD Player,

5) projection/audio system and 6) ELMO.

All Smart Classrooms have the following software: 1) Microsoft

Office Suite (Word, Excel, and PowerPoint), 2) Internet

Explorer/Netscape with plug-ins and 3) Anti-virus software.

For your specific room configuration, instructions and tutorials

please check the listing at

http://www.cofc.edu/computingroomlookup.

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

Question:

•Is there a “generic?”smart classroom login

Answer:

Many of the Smart Classrooms on campus automatically login to

the College network. You also have the ability to login to the

computer with your Cougars user name and password or the

generic smart classroom login. Note: Mac classrooms login

automatically .

smart

no password – leave blank

acadcomp

For your specific room configuration, instructions and tutorials

please check the listing at

http://www.cofc.edu/computingroomlookup.

Question:

•Is it possible to use my Cougars username and password

in the Smart Classroom?

Answer:

All users with an active College of Charleston Cougars account can

log into a Smart Classroom computer with their Cougars username

and password. Doing so allows you to access your network user

folder in the classroom. Only the user and domain administrators

have access to this user folder. Please contact your School Liaison

if you require assistance. Note: Mac classrooms can also access

network user folders in the classroom. For specific instructions

please see the tutorials section at

http://www.cofc.edu/computingroomlookup.

Cougars Username

Cougars Password

Cougars

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

Question:

•Is there a laser pointer available in the smart classroom?

•Can I advance my PowerPoint slides away from the

computer system?

Answer:

If your room is equipped with an Interactive RF Remote Control

for Presentations you can use this remote to advance your slides.

There is also a laser pointer on the device. Please note, if you are

using a Smart Classroom with a Macintosh Station, Buttons 1,

2, 3, 4, and the right click option is NOT available for use with

the Mac Platform.

Question:

•Where do I find instructions for using my laptop in a

Smart Classroom?

Answer:

For instructions and tutorials please look for your room at

http://www.cofc.edu/computingroomlookup or contact your

School Liaison for additional assistance

(http://www.cofc.edu/~liaisons/).

Question:

Who do I contact if I have questions, would like to schedule

additional orientation sessions or need to add software to my

Smart Classroom?

Answer:

Contact your School Liaison for additional assistance with your

Smart Classroom requests. Contact information for each liaison is

available at: http://www.cofc.edu/~liaisons/.

Question:

•What information do I need to provide the Helpdesk when

calling in a problem for a Smart Classroom?

Left-Click

(Click trigger

underneath)

Used to advance a

slide in PowerPoint

Laser Pointer

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

Answer:

If you experience a problem with a computer or peripheral device

in this room, please report it to Helpdesk by calling 953-3375. You

can also email the problem description to [email protected]. If

you are at the computer when you place the call, the Helpdesk

operator can help you try to resolve the problem yourself while

you’re on the phone or, alternatively, can generate a work order

that will be forwarded to a classroom support technician.

Be prepared to provide the operator with the following

information:

1) The building, room number and type of classroom

•Smart Classroom

•Laptop Ready Smart Classroom

•Computer Classroom with Multiple

Computer Stations

2) Your name

3) Your contact phone number or email address

4) Which machine is having the problem: (e.g., “student

station Glebe32” or “the teacher’s station”. Each Student

Computer Station will be labeled with the Station Name on

the top of the Nova Desk).

NOTE: If you are using your personal laptop in a Laptop

Ready Smart Classroom please inform the Helpdesk

technician when placing your call.

Machine Name: ______________________

This station is a:

•Teacher Station

•Laptop Ready Smart Classroom and I am

using my personal laptop

•Student Station

5) A detailed description of the problem:

During the course of the call the Help Desk operator may

enquire of you whether it’s OK for a support person to

come to the room while your class is in session. If you

prefer that your class not be interrupted, the support person

will identify a time when the room is not in use and plan to

work on the problem at that time.

At the close of your call to Help Desk, the operator will

inform you of the work order number that has been assigned

to your call. This number will serve as a quick reference to

your call for the both the Help Desk operators and the

support person who responds to your call at the on-site

location.

Smart Classroom Operations Guide Academic Computing - College of Charleston revised: 1/10/2005:jpva

Instructions for Boxlight CP300T

COMMON PROBLEM DESCRIPTIONS:

PROJECTOR:

The projector will not power on

The remote for the projection unit is not responding

The image is not projecting on the screen

MONITOR:

The monitor is not receiving power

The monitor does not have an image

MOUSE/KEYBOARD:

The mouse/keyboard is not responding

The mouse/keyboard is unplugged

The Sound from the VCR is not playing

VCR

The VCR is not receiving power

The VCR image is not projecting on the screen

COMPUTER

The computer is not receiving power/will not boot

REMOTES:

Which remote is having the problem?

VCR remote

Projector Remote

Remote Pointer Device

Andere Handbücher für CP-300t

Andere BOXLIGHT Projektor Handbücher

BOXLIGHT

BOXLIGHT SP-10t Bedienungsanleitung

BOXLIGHT

BOXLIGHT PRO7501DP Bedienungsanleitung

BOXLIGHT

BOXLIGHT XD-9m Bedienungsanleitung

BOXLIGHT

BOXLIGHT Cambridge X33N Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-726c Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-57i Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-355m Bedienungsanleitung

BOXLIGHT

BOXLIGHT XP-58z Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-315t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-16t Bedienungsanleitung

BOXLIGHT

BOXLIGHT PhoenixX30 Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-750m Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-727x Bedienungsanleitung

BOXLIGHT

BOXLIGHT Projecto Write8 Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-600m Bedienungsanleitung

BOXLIGHT

BOXLIGHT Seattle X26N Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-306t Bedienungsanleitung

BOXLIGHT

BOXLIGHT ECO X26N Bedienungsanleitung

BOXLIGHT

BOXLIGHT P12 Installationsanleitung

BOXLIGHT

BOXLIGHT KVU600 Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-36t Bedienungsanleitung

BOXLIGHT

BOXLIGHT AYW502 Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-454m Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung