BOXLIGHT Cp-710k Bedienungsanleitung

Downloaded From projector-manual.com Boxlight Manuals

FCC GUIDELINES

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use only shielded cables to connect I/O devices to this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference. (2)

This device must accept any interference received, including interference that may

cause undesired operation.

Information to User:

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this equipment.

Shielded interface cable, if any, must be used in order to comply with emission

limits.

Downloaded From projector-manual.com Boxlight Manuals

Contents

1、Overview........................................................................................................3

2、Accessories.....................................................................................................4

3、Definitions of Buttons and Indicators ............................................................5

4、Explanation of Indicator Status......................................................................7

5、Setting Up.......................................................................................................9

6、Connecting Projector.....................................................................................11

7、Operating OSD(On Screen Display) Menu...................................................14

8、Maintenance..................................................................................................20

9、Appendix.......................................................................................................21

Downloaded From projector-manual.com Boxlight Manuals

Overview

Features

zPortable projector with compact design and light weight：6.8 lbs / 3.1kg.

zExcellent display with high brightness and contrast ratio.

zHighly compatible with various computer and video input signals within a

horizontal frequency range of 15 to 80kHz and a vertical frequency range of 43

to 85kHz. (VGA to SXGA)

zManual zoom control enables user to adjust the screen between 40” (1.33m) to

200”(6.67m).

zVersatile capabilities with vertical keystone correction, freeze, blank and PIP

function

zDigital zoom adjustment providing user with highlight and focus function on

pivotal discussion at a presentation

zHandy remote control with mouse and laser pointer function

Warnings

zThe projector is designed to operate on a power supply of 90～265Vac

50/60Hz. Ensure that your power supply fits this requirement before attempting

to use your projector.

zDo not stare directly into the lens if possible. Eye damage could result.

zThe projector should never be placed near or over a radiator or heat

zNever expose the projector to rain or use near water; also, do not spill liquid of

any kind on it.

zDo not cover the ventilation slots and openings. These allow air circulation and

cooling to the projector to protect it from overheating.

zDo not overload wall outlets and extension cords as this can result in fire or

electric shock.

zTo turn off the projector, press Power button to display the message and press

again to turn off. After projector is turned off, cooling fan keeps operating;

during the cooling period, the projector cannot be turned on again.

zTurn off the projector and disconnect power cord if it is not to be used for an

extended period of time.

zDo not attempt to service this projector yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service technicians from your authorized dealer.

zWhen replacement parts are required, make sure the parts are of the same type

from your authorized dealer.

Downloaded From projector-manual.com Boxlight Manuals

Accessories

Standard Accessories

Optional Accessories

zLamp

zAir filter

zCarry bag

zRS232 Cable

You can purchase these spare parts from your authorized dealer or service center.

zUser’s Manual zS-Video Cable

zPower Cord zDVI to D-Sub Converter

zVideo Cable (RCA Type) zRCA-PC Audio Cable

zD-Sub 15pin Cable

zRemote Control (with two AA

Batteries)

zPC-PC Audio Cable

zUSB Cable

Downloaded From projector-manual.com Boxlight Manuals

Definition of Buttons and Indicators

Remote Control

Buttons and Indicators of Control Panel

Downloaded From projector-manual.com Boxlight Manuals

Definition of Button Function

Button Function (In Normal Working Mode)

Power zPress Power button to turn on the projector.

zPress Power button twice to turn off the projector.

Menu zPress Menu button to display OSD menu.

Exit zPress Exit button to close OSD menu.

Source zPress Source button to select input signal with the sequence o

VGA, AV, S-Video and DVI.

V Keystone zPress V Keystone and ÎÍbutton to correct keystone distortion.

Volume zUsed to increase and decrease volume

Laser zLaser Pointer

Auto zUsed to operate image quality Auto Adjustment (only for VGA)

L/R zL: Left Click button of the mouse

R: Right Click button of the mouse

Track ball zUsed to move the cursor

Mute zPress Mute button to cut off sound and press again to restore to

the previous level

Blank zPress Blank button to blank out the screen and press again to

restore the image

Freeze zPress Freeze button to freeze image on-screen and press again to

cancel Freeze function

Enlarge

(+/-) zPress Enlarge +/- button to enlarge or reduce the image and press

ÏÐÎ Íbutton to move the image.

P/P zDisplay PIP Quick Menu

Downloaded From projector-manual.com Boxlight Manuals

Explanation of Indicator Status

Condition ⊙Fan

(Red)

⊙Ready

(Green)

⊙Lamp

(Orange) Status

Off On Off Standby Mode

Off Off On Normal Working Mode

Normal

Off Flash Alternately Once a Sec. Heat Dissipation

Flash Off On

Fan Error (Stage 1)

Flash Flash Alternately Once a Sec. Fan Error (Stage 2)

Off Off Off No Power

Abnormal

Off Off Flash Lamp Error

Projector in Standby Mode

zWhen pressing Power button on Remote Controller or Control Panel, Ready

indicator is on; the projector is in standby mode and ready to enter the normal

working mode.

Projector in Normal Working Mode

zWhen the projector is entering normal working mode, Ready indicator will

turn off and Lamp indicator will turn on. If no any error happens, it will stay

the same during operation.

Projector in Heat Dissipation Status

zWhen pressing Power button twice on Remote Controller or Control Panel to

turn off the projector, cooling fan will keep operating and for the time being,

Fan indicator is off and Lamp indicator and Ready indicator are flashing

alternately once a second. Before both Lamp and Ready indicators turn off,

the projector cannot be turned on again.

Fan Error

zWhen a fan error is detected during operation (Stage 1), there is an image of

fan warning on the screen and the system will proceed to self-detection. At

this time, Fan indicator keeps flashing, Ready indicator is off and Lamp

indicator is on. If fan error consists continuously after system self-detection,

Downloaded From projector-manual.com Boxlight Manuals

Ready and Lamp indicators will flash alternately to enter stage 2; the projector

will turn off automatically and go into heat dissipation status. Please contact

your authorized dealer for fan replacement.

No Power

zMake sure that the power cord is well connected to wall outlet and the switch

is on; if three indicators are still off, Power Supply error might happen. Please

contact your authorized dealer for service.

Lamp Error

zWhen Lamp indicator keeps flashing during operation, there is a problem of

Lamp Error.

zAlso, when a projected image becomes dark or image color turns into

unnatural one, lamp replacement is required.

zFor safety reasons, replace with a lamp module of the same type and order it

through your authorized dealer.

Downloaded From projector-manual.com Boxlight Manuals

Setting Up

Location for Operation

zPlace the projector on a level surface and in a dry area free from dust and

moisture.

zOperate the projector on a flat projection surface and in a darkened

environment to provide best image.

zTo install the projector on the ceiling, please contact a qualified technician. Do

not attempt to mount the projector on a ceiling yourself.

Positioning Projector

zEnsure that the projected image is exactly perpendicular to the screen to avoid

image distortion.

zProjection size can be focused from 40” to 200”.

zRefer to the figures below to adjust the size of screen you desire.

Projection Distance / Size Table

Projection Size/inch Project Distance /m Project Distance/m

40” 1.33 1.64

50” 1.67 2.05

60” 2 2.46

100” 3.33 4.1

150” 5 6.15

200” 6.67 8.2

Downloaded From projector-manual.com Boxlight Manuals

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BOXLIGHT Projektor Handbücher

BOXLIGHT

BOXLIGHT Cinema 12SF Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-731i Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-16t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-727x Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-57i Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-306t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-19t Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-350m Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-454m Bedienungsanleitung

BOXLIGHT

BOXLIGHT KVU600 Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-455m Bedienungsanleitung

BOXLIGHT

BOXLIGHT ProjectoWrite2 Bedienungsanleitung

BOXLIGHT

BOXLIGHT XD-9m Bedienungsanleitung

BOXLIGHT

BOXLIGHT XP-56d Bedienungsanleitung

BOXLIGHT

BOXLIGHT Raven Bedienungsanleitung

BOXLIGHT

BOXLIGHT MCP-305t Bedienungsanleitung

BOXLIGHT

BOXLIGHT Seattle X22N Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-93i Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-730e Bedienungsanleitung

BOXLIGHT

BOXLIGHT Seattle X30N/W Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-36t Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-37t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP718e Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-58i Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

BOXLIGHT cp-710k Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken