BOXLIGHT CP-731i Bedienungsanleitung

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

NORSK

TECHNICAL

PORTGÊS

Multimedia LCD Projector

CP-731i

USER'S MANUAL

Please read this user's manual thoroughly to ensure correct usage of this projector.

BEDIENUNGSANLEITUNG

Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung

aufmerksam.

MANUEL D'UTILISATION

Nous vous recommandons de lire attentivement ce menuel pour bien assimiler le

fonctionnement de l'appareil.

MANUAL D'ISTRUZIONI

Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter

comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.

MANUAL DE USUARIO

Lea cuidadosamente este manual del usuario para poder utilizar corretamente el

producto.

GEBRUIKSAANWIJZNG

Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te

hebben van de uitgebreide mogelijkheden.

BRUKERHÅNDBOK

Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.

INSTRUÇÕES DO PROPRIETÁRIO

Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do

usuário.

TECHNICAL

REGULATORY NOTICES

ENGLISH

Multimedia LCD Projector

USER'S MANUAL

ENGLISH-1

Thank you for purchasing this LCD projector.

Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S

MANUAL” thoroughly to ensure correct usage of this projector. After reading, store this

instruction manual in a safe place for future reference.

CONTENTS

FEATURES....................................P.2

BEFORE USE................................P.2

Contents of Package...........................P.2

Part Names .........................................P.3

Installing the Batteries.........................P.5

Attaching the Projector Handle ...........P.5

INSTALLATION.............................P.6

Installation of the projector and Screen

.....P.6

Angle Adjustment................................P.6

Cabling................................................P.7

Power Connection...............................P.8

Example of System Setup...................P.8

Plug & Play..........................................P.8

OPERATIONS................................P.9

Switching the Power Supply ON/OFF

....P.9

Basic Operation.................................P.10

Setup Menu.......................................P.12

Input Menu ........................................P.13

Image Menu ......................................P.14

Options Menu....................................P.15

No Signal Menu.................................P.16

MAINTENANCE...........................P.17

Lamp .................................................P.17

Air Filter Maintenance .......................P.19

Other Maintenance............................P.19

TROUBLESHOOTING.................P.20

OSD Message...................................P.20

Indicators Message...........................P.21

Symptom...........................................P.22

SPECIFICATIONS .......................P.23

WARRANTY ................................P.24

NOTE:

•The information in this manual is subject to change without notice.

•The manufacturer assumes no responsibility for any errors that may appear in this manual

•The reproduction, transmission or use of this document or contents is not permitted without

express written authority.

TRADEMARK ACKNOWLEDGMENT:

•PS/2, VGA and XGA are registered trademark of International Business Machines Corporation.

•Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.

•VESA and SVGA are trademarks of the Video Electronics Standard Association.

•Windows is a registered trademark of Microsoft Corporation.

•Carefully observe the trademarks and registered trademarks of all companies, even when not

mentioned.

ENGLISH-2

FEATURES

This multimedia LCD projector is used to project various computer signals as well as NTSC / PAL /

SECAM video signals onto a screen. Little space is required for installation and large images can

easily be realized.

• Outstanding brightness

The UHB lamp and high-efficiency optical system assure a high level of brightness.

•Partial magnification function

Interesting parts of images can be magnified for closer viewing.

•Distortion correction function

Distortion-free images are quickly available.

BEFORE USE

Contents of package

Make sure all of the following items are included in the package. If anything is missing, please

contact BOXLIGHT at 800-762-5757 or 360-779-7901.

NOTE: Keep the original packing material for future shipments.

Projector

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

NORSK

TECHNICAL

PORTGÊS

Liquid Crystal Projector

0000000000000

USER'S MANUAL

Pleaseread this user's manual thoroughly to ensure correct usage through understanding.

BEDIENUNGSANLEITUNG

Bittelessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung

aufmerksam.

MANUEL D'UTILISATION

Nousvous recommandons de lire attentivement ce menuel pour bien assimiler le

fonctionnementde l'appareil.

MANUAL D'ISTRUZIONI

Vipreghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter

comprenderequanto r iportato ai fini di un corretto utilizzo del proiettore.

MANUAL DE USUARIO

Leacuidadosamente este manual del usuario para poder utilizar corretamente el

producto.

GEBRUIKSAANWIJZNG

Leesvoor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te

hebben van de uitgebreide mogelijkheden.

BRUKERHÅNDBOK

Vennligstles denne bruksanvisningen grundig for å være garantert driftssikker bruk.

INSTRUÇÕES DO PROPRIETÁRIO

Paraassegurar o uso correto do equipamento, por favor leia atentamente este

manual do usuário.

TECHNICAL

REGULATORYNOTICES

User’s Manual

(this manual)

Safety Instructions

Power Cord

US Type

RGB Cable Video/Audio Cable Mouse cable

(PS/2)

STANDBY/ON

LASER

VIDEO

BLANK

RGB

AUTO

MENU SELECT

POSITION

RESET

FREEZE

MAGNIFY

OFF

VOLU ME

MUTE

TIMER

Remote Control

Transmitter

Batteries

for Remote Control

Transmitter

Projector Handle

Power Cord

Europe Type

ENGLISH-3

BBEEFFOORREEUUSSEE((ccoonnttiinnuueedd))

ENGLISH

Part Names

Control Panel (Refer to P.9 "OPERATIONS")

Power Switch

AC Inlet

(to the Power Cord)

Ventilation Openings

(Intake)

Zoom Knob

Focus Ring

Remote Control Sensor

Lens

Slide Lens door

Foot Adjuster

FRONT/LEFT VIEW OF

THE PROJECTOR

Speaker

Handle Hook

STANDBY/ON Button

MUTE Button

Foot Adjuster Button

Air Filter and Intake

(for the Cooling Fan)

Rear Foot Adjuster

INPUT Button

LAMP Indicator

TEMP Indicator

POWER Indicator

RESET Button

MENU Button

Ventilation Openings

(exhaust)

REAR/RIGHT VIEW OF

THE PROJECTOR Terminal Panel

(Refer below)

TERMINAL PANEL

S-VIDEO Terminal

VIDEO IN Terminal

AUDIO IN L

Terminal

AUDIO IN R

Terminal

AUDIO IN 1

Terminal

AUDIO IN 2

Terminal

AUDIO OUT

Terminal

Remote Control Sensor

RGB IN 1 Terminal

RGB IN 2 Terminal

CONTROL Terminal

RGB OUT Terminal

USB Terminal

AUDIO IN VIDEO IN S-VIDEO IN

AUDIO

AUDIO OUT

2 USB

RGB IN

RGB OUT CONTROL

ENGLISH-4

BBEEFFOORREEUUSSEE((ccoonnttiinnuueedd))

Part Names (continued)

WARNING

Never look directly into the laser beam outlet or point the laser beam at other people.

The laser beam can cause vision problems.

ANDBY/ON

LASER

VIDEO

BLANK

RGB

AUTO

MENU SELECT

POSITION

RESET

FREEZE

MAGNIFY

OFF

VOLUME

MUTE

TIMER

REMOTE CONTROL TRANSMITTER

(Refer to P.9 "OPERATIONS")

NOTE:To prevent any malfunction;

•Do not give the remote control transmitter any physical impact. Do not drop.

•Do not place heavy objects on the remote control transmitter.

•Do not wet the remote control transmitter or place it on any wet object.

•Do not place the remote control transmitter close to the cooling fan of the projector.

•Do not disassemble the remote control transmitter if it malfunctions. Please contact BOXLIGHT.

CAUTION

LASER RADIATION-

DO NOT STARE INTO BEAM



WAVE LENGTH: 650nm

MAX . OUTPUT: 1mW



CLASS 2 LASER PRODUCT

RADIAZIONI LASER

NON GUARDARE NEL RAGGIO LUCE

APPARECCHIO LASER DI CLASSE 2

RAYONNEMENT LASER

NE PAS REGARDER DANS

LE FAISCEAU APPAREIL

A LASER DE CLASSE 2

LASER-STRAHLUNG

NICHT IN DEN STRAHL

BLICKEN LASER KLASSE2

MANUFACTURED

PLACE OF

MANUFACTURER:A

MADE IN JAPAN

IEC60825-1:1993+A1:1997

STANDBY/ON button LASER button

BLANK button

DISK PAD

Used to operate the

mouse shift function

and left click function.

AUTO button

MENU button

MENU SELECT button

Used to click the left

mouse button.

, , , button

Used to operate the

mouse shift function.

MAGNIFY button

VIDEO button

RGB button

MOUSE / RIGHT button

Used to click the right

mouse button.

RESET button

Used to click the right

mouse button.

VOLUME button

FREEZE button

MUTE button

POSITION button

TIMER button

: These functions work when the mouse control function is activated. Remember, the POSITION,

BLANK ON and MENU ON functions disable the mouse control function.

ENGLISH-5

BBEEFFOORREEUUSSEE((ccoonnttiinnuueedd))

ENGLISH

Installing the Batteries

Install the AA batteries into the remote control

transmitter.

1. Remove the battery cover.

Push the knob while lifting up the battery cover.

2. Load the batteries.

Make sure the plus and minus poles are correctly

oriented.

3. Close the battery cover.

CAUTION

•Use only the specified batteries with this remote control transmitter. Also, do not mix

new and old batteries. This could cause battery cracking or leakage, which could result

in fire or personal injury.

•When loading the batteries, make sure the plus and minus terminals are correctly

oriented as indicated in the remote control transmitter. Incorrect orientation could cause

battery cracking or leakage, which could result in personal injury or pollution of the

surrounding environment.

•When you dispose of the battery, follow the law in your area or country.

•Keep the battery away from children and pets.

•When not using the remote for an extended period, remove the batteries from the remote

control transmitter.

NOTE:Replace the batteries when remote control transmitter operation becomes difficult.

Attaching the Projector Handle

Attaching the enclosed handle needed.

1. Raise up the handle hook, and pass one end of the

handle through the hole of handle hook.

2. Buckle the end of the handle, per diagram at right.

3. Fix the other end of the handle to the other handle

hook in the same way.

CAUTION

Make sure the handle is firmly attached before carrying the projector with the handle. If

the projector is dropped , it could result in an injury, and continued use could result in fire

or electrical shock.

ENGLISH-6

INSTALLATION

Installation of the Projector and Screen

CAUTION

•Install the projector in a suitable environment according to instructions of the

accompanying manual “SAFETY INSTRUCTIONS”and this manual.

•Use the liquid crystal projector at the horizontal position only.

If you use this projector by

the lens up position, the lens down position or the side up position, this may cause the heat

inside to build up and cause damage.

Be especially careful not to install it with ventilation

holes blocked.

Refer to the drawing and table below to determine the screen size and projection distance.

TOP VIEW

SIDE VIEW

a: Distance from the LCD projector to the screen.

The projection distance shown in the table below

are for full size (1024 x 768 dots) images.

Table 1. Installation Reference

Screen size

(inches)

a (inches)

Min. Max.

40 65 78

60 98 117

80 131 157

100 163 196

120 196 236

150 246 295

200 328 394

Angle Adjustment

Use the foot adjuster on the bottom of the projector to adjust the projection angle. It is variable

within 0˚to 9˚approximately.

1. Lift up the front side of the projector, and pressing

the foot adjuster button, adjust the projection angle.

2. Release the button to lock at the angle to be fixed.

3. Turn the rear foot adjuster to adjust the left-right slope.

CAUTION

Do not release the foot adjuster button unless the projector is being held; otherwise, the

projector could overturn or the fingers could get caught and cause personal injury.

Foot Adjuster Press the foot adjuster button

Rear Foot Adjuster

ENGLISH-7

ENGLISH

IINNSSTTAALLLLAATTIIOONN((ccoonnttiinnuueedd))

Cabling

RGB signal input:

Connect the RGB IN 1 or 2 terminal of the projector to the RGB signal output of the computer by the enclosed

RGB cable.

For some modes, the optional Mac adapter is necessary. Consult BOXLIGHT if you have any questions

regarding connection to an Apple computer.

Some computers may have multiple display screen modes. Use of some of these modes will not be possible with

this projector.

Audio signal input (from computer) :

Connect the AUDIO IN 1 or 2 terminal of the projector to the audio signal output of the computer by the

optional audio cable.

Video signal input:

Connect the VIDEO IN terminal of the projector to the video signal output of the video tape recorder by the

enclosed video/audio cable.

For S-Video signal, use the S-VIDEO IN terminal of the projector and the optional S-Video cable with Mini DIN

4-pin jack.

Audio signal input (from video tape recorder) :

Connect the AUDIO IN R and L terminals of the projector to the audio output of the video tape recorder by the

enclosed video/audio cable with RCA jack.

RGB signal output:

Connect the RGB OUT terminal of the projector to the RGB signal input terminal of the monitor by the optional

RGB cable with D-sub 15-pin shrink jack.

Audio signal output:

Connect the AUDIO OUT terminal of the projector to the audio signal input terminal of the speaker by the

optional audio cable with stereo mini jack.

PS/2, ADB , Serial or RS-232C communication:

Connect the CONTROL terminal of the projector to the computer by an appropriate cable.

For PS/2 mouse control (for IBM and compatible) use the enclosed mouse cable. For others, contact

BOXLIGHT to purchase optional cables.

USB communication (mouse control only):

Connect the USB jack (B type) of the projector to the USB jack (A type) of the computer by optional USB cable.

CAUTION

•Incorrect connecting could result in fire or

electrical shock. Please read this manual and the

separate “SAFETY INSTRUCTIONS”.

•Before connecting, turn off power to all devices

to be connected, except when connecting the

USB cable.

•The cables (Power cord, RGB cable and other

cables) may have to be used with the core set to

the projector side. Use the cables which are included with the projector or specified.

Core

NOTE:

•Before connecting, read the instruction manuals of the devices to be connected, and make sure that

the projector is compatible with the device.

•Secure the screws on the D-sub connectors and tighten.

•Refer to the TECHNICAL section for the pin assign of connectors and RS-232C communication

data.

AUDIO IN VIDEO IN S-VIDEO IN

AUDIO

AUDIO OUT

2 USB

RGB IN

RGB OUT CONTROL

Example of system setup

Video tape recorder

with S jack

Video tape recorder

Computer

(desktop type)

Computer

(notebook type)

NOTE:

When connecting with notebook computer, set to valid the RGB external image output (setting

CRT display or simultaneous display of LCD and CRT).Please read instruction manual of the

notebook for more information.

Plug & Play

This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer

that is VESA DDC (Display Data Channel) compatible.

(Plug & play is a system configured with peripheral equipment including a computer and display,

and an operating system.

NOTE:

•Use the RGB cable included with this projector when using plug & play. With other cables, pins

(12) (14) (15) are sometimes not connected.

•Plug & play is available only when the RGB cable is connected to the RGB IN 1 terminal.

RGB Cable

RS-232C

Cable

ENGLISH-8

IINNSSTTAALLLLAATTIIOONN((ccoonnttiinnuueedd))

Power Connection

Use the correct one of the enclosed power cords depending on the power outlet to be used.

Connect the AC inlet of the projector to the power outlet firmly by the power cord.

WARNING

•Handle the power cord according to instructions of the

accompanying manual "SAFETY INSTRUCTIONS"

and this manual.

•Connect the power cord firmly. Avoid using a loose,

unsound outlet or contact failure.

AC Inlet

Power Cord

Power outlet

Speaker (with built-in amp) Display monitor

ENGLISH-9

ENGLISH

OPERATIONS

Switching the Power Supply ON/OFF

Switching Power ON

1. Check that the power cord is connected correctly.

2. Set the power switch to [ | ]. The standby mode is selected, and the Power indicator is turned to

orange.

3. Press the STANDBY/ON button on the control panel or the remote control transmitter.

Warm-up begins and the Power indicator blinks in green.

4. The Power indicator ceases blinking and turns to green when power is on. Open the slide lens

door.

5. Adjust picture size using the projection lens Zoom Knob.

6. Adjust focus using the projection lens Focus Ring.

Switching Power OFF

1. Press the STANDBY/ON button on the control panel or the remote control transmitter for

approximately two seconds. The projector lamp is extinguished and lamp cooling begins. The

Power indicator blinks orange during lamp cooling. Pressing the STANDBY/ON button has

no effect while the Power indicator is blinking.

2. The system assumes the Standby mode when cooling is complete, and the Power indicator ceases

blinking and changes to orange. When the indicator is orange, set the Power switch to [

3. The Power indicator is extinguished when power is off. Do not forget to close the lens door.

WARNING

Please read this manual, and the separate “SAFETY INSTRUCTIONS”thoroughly before

using the equipment. Always ensure that the equipment is used safely.

Power Switch Slide Lens door

STANDBY/ON Button

POWER Indicator

STANDBY/ON

LASER

VIDEO

BLANK

RGB

AUTO

MENU SELECT

POSITION

RESET

FREEZE

MAGNIFY

OFF

VOLUME

MUTE

STANDBY/

ON Button

ZOOM knob

FOCUS ring

NOTE:

•Except in emergencies, do not turn off unless the Power indicator is orange as it will reduce the

life of the projector lamp.

•To prevent problems, turn on/off the projector when the computer or video tape recorder is OFF.

Providing a RS-232C cable is connected, turn on the computer before the projector.

Inhaltsverzeichnis

Andere BOXLIGHT Projektor Handbücher

BOXLIGHT

BOXLIGHT CP718e Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-320tA Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-42t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-16t Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-57i Bedienungsanleitung

BOXLIGHT

BOXLIGHT MP-56t Bedienungsanleitung

BOXLIGHT

BOXLIGHT ProjectoWrite2-W Bedienungsanleitung

BOXLIGHT

BOXLIGHT MCP-305t Bedienungsanleitung

BOXLIGHT

BOXLIGHT Projector Bedienungsanleitung

BOXLIGHT

BOXLIGHT Seattle Series Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-753z Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-13t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-320t Bedienungsanleitung

BOXLIGHT

BOXLIGHT SP-10t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-18t Bedienungsanleitung

BOXLIGHT

BOXLIGHT Studio Experience PREMIERE 30HD Bedienungsanleitung

BOXLIGHT

BOXLIGHT CD-450m Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-306t Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-19t Bedienungsanleitung

BOXLIGHT

BOXLIGHT ProjectoWrite Bedienungsanleitung

BOXLIGHT

BOXLIGHT SP-48Z Bedienungsanleitung

BOXLIGHT

BOXLIGHT Studio Experience Matinee 1HD Bedienungsanleitung

BOXLIGHT

BOXLIGHT XD-10m Bedienungsanleitung

BOXLIGHT

BOXLIGHT Seattle X30N Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung