Bpt MTMDY Montageanleitung

English

FB00427-EN

INSTALLATION AND PROGRAMMING MANUAL

MTMDY

Display module for modular entry panel

Page 2- Manual FB00427-EN - ver. 1

- 10/2016 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.

General warnings

• Important personal safety instructions: READ CAREFULLY!

• Installation, programming, commissioning and maintenance must only be performed by qualiﬁed and experienced personnel in

compliance with applicable regulations.

• Wear antistatic shoes and clothing if working on the control board.

• Do not obstruct ventilation or heat dissipation openings or vents.

• Keep hold of these warnings.

• Always disconnect the electrical power supply during cleaning or maintenance.

• This product should only be used for the purpose for which it was explicitly designed. Any other use is considered dangerous.

• The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.

DESCRIPTION

Display module connected and powered via BUS.

Module assembly or removal must take place while the entry panel is not powered.

❶Display

2Navigation buttons

3Outlets for connection to other modules

Technical data

Type MTMDY

Power supply (V DC) 10.7 to 18

MAX current draw (mA) 250

MIN current draw (mA) 55

Storage temperature (°C) -25 to +70

Operating temperature (°C) -25 to +55

Protection rating (IP) 54

Page 3- Manual FB00427-EN - ver. 1

- 10/2016 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.

CONFIGURING THE MODULE

Accessing configuration mode

Press and hold the buttons at the same time until the password entry screen shown

in ﬁgure Aappears (default password 1234).

Use the buttons to enter the ﬁrst of the four numbers that make up your password.

Press to conﬁrm and move on to the next number.

Once you have entered the correct password, you can access the dedicated module con-

ﬁguration section B.

Use the buttons to scroll through the various parameters to conﬁgure. Press to

access the conﬁguration options.

0 _ _ _

Conguration

Language

Information

Display

Information

Version

BACK

Information

Version

BACK

Language

Italiano

English

Français

Version

1.00.001 - 1.05

1.00.000

1.00.003 - 1.08

SN: 123456

IP: 192.168.12.1

255.255.255.255

[Language]

Scroll through the list of available languages

Cusing the buttons. Press to choose

the one you require and go back to the previ-

ous menu.

Select and press to go back to the pre-

vious menu without changing the existing pro-

gramming.

[Information] D

The menu provides technical information re-

garding the display module and the other mod-

ules installed on the entry panel.

[Version] E

The buttons allow you to scroll through

the list and view the ﬁrmware version of the

modules installed on the entry panel.

Key to symbols

audio or audio/video pushbutton panel

display keypad

RFID info

Select and press to go back to the pre-

vious menu.

[ID] F

The information contained in this menu refers

to the audio or audio/video module installed on

the entry panel.

SN: identiﬁcation code (also found on the back

of the module),

IP: IP address of the module and subnet mask

(information only found on IP modules).

Select and press to go back to the pre-

vious menu.

A B

Page 4- Manual FB00427-EN - ver. 1

- 10/2016 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.

Conguration

Language

Information

Display

Contrast

Backlight

BACK

Backlight

Colour

Brightness

Standby

Brightness

Contrast

BACK

Colour

White

Blue

BACK

From the main menu A, use , to select

[Display] and press to access the conﬁg-

uration options.

[Display] B

The menu allows you to adjust all the parame-

ters relating to display lighting.

[Backlight] D

[Colour] E

The buttons allow you to choose the col-

our of the display backlight.

Press to conﬁrm your choice and go back to

the previous menu.

Select and press to go back to the pre-

vious menu without changing the existing pro-

gramming.

[Contrast] C

The buttons allow you to scroll and simultaneously view the available contrast levels.

Press to choose the required level and go back to the previous menu.

Select and press to go back to the previous menu without changing the existing

programming.

[Brightness] F

The buttons allow you to scroll and simultaneously view the available brightness

levels.

Press to choose the required level and go back to the previous menu.

Select and press to go back to the previous menu without changing the existing

programming.

A B

C D

Page 5- Manual FB00427-EN - ver. 1

- 10/2016 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.

Conguration

Display

Tones

Phonebook

Tones

OFF

BACK

Phonebook

Search intervals

Interval limit

BACK

Search intervals

BACK

Standby ON

BACK

Standby

OFF

BACK

[Standby] G

The buttons allow you to determine the behaviour of the display module after 30

seconds of inactivity.

OFF = The backlight is always on.

ON = The screen dims the display until a button is pressed.

If you choose to activate the [Standby] function (ON), pressing allows you to access the

window for adjusting brightness in Standby mode H.

The buttons allow you to scroll and simultaneously view the available brightness

levels for Standby mode.

Press to conﬁrm your choice and go back to the previous menu.

Select and press to go back to the previous menu without changing the existing

programming.

From the main menu A, use , to select

[Tones] and press to access the conﬁgu-

ration options.

[Tones] B

The buttons are used to activate/deac-

tivate tones.

Press to conﬁrm your choice and go back to

the previous menu.

Select and press to go back to the pre-

vious menu without changing the existing pro-

gramming.

[Phonebook] C

The menu allows you to conﬁgure the way in

which the names in the phonebook are dis-

played in order to facilitate the user in search-

ing for the required name.

[Search intervals] D

The buttons allow you to choose into how

many parts to divide the phonebook.

Press to conﬁrm your choice and go back to

the previous menu.

Select and press to go back to the previous menu without changing the existing programming.

N.B. If you choose option [1], the phonebook name list will not be divided up in any way.

A B

C D

Page 6- Manual FB00427-EN - ver. 1

- 10/2016 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.

Interval limit

BACK

[Interval limit] E

The buttons allow you to choose the maximum number of permissible names for

each search range. Below this limit, the phonebook is not divided up any further.

Press to conﬁrm your choice and go back to the previous menu.

Select and press to go back to the previous menu without changing the existing

programming.

Conguration

Password

Reset

BACK

Password

Change password

BACK

Reset

Perform reset

BACK

Old

* * * 4

BACK

New

* * * 1

BACK

Conrm new

* * * 1

BACK

From the main menu A, use , to select

[Password] and press to change the pass-

word.

[Password] B

At any point in the process you can select

and press to return to the previous menu

without changing the existing password.

Press to change the current password and

continue.

Use the buttons to enter the ﬁrst of the

four numbers that make up the old password.

Press to conﬁrm and move on to the next

number.

Once you have entered all the numbers in the

old password C, enter the new password as

required DE.

From the main menu A, use , to select

[Reset] and press .

[Reset] F

Select and press to go back to the previ-

ous menu without resetting.

Press to reset and return the entry panel to

its factory settings.

Page 7- Manual FB00427-EN - ver. 1

- 10/2016 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.

The product complies with the applicable reference directives.

Dismantling and disposal. Dispose of the packaging and the device properly at the end of its life cycle, according to the regulations in force in the country where

the product is used. The recyclable components bear the symbol and code for the material.

THE DATA AND INFORMATION PROVIDED IN THIS MANUAL ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT PRIOR NOTICE.

MEASUREMENTS, UNLESS OTHERWISE INDICATED, ARE IN MILLIMETRES.

Came S.p.A.

Via Martiri Della Libertà, 15 Via Cornia, 1/b - 1/c

31030 Dosson di Casier

Treviso - Italy

33079 Sesto al Reghena

Pordenone - Italy

(+39) 0422 4940

(+39) 0422 4941

(+39) 0434 698111

(+39) 0434 698434

www.came.com

English - Manual FB00427-EN - ver. 1- 10/2016 - © Came S.p.A.

The contents of this manual are subject to change at any time without prior notice.

Inhaltsverzeichnis

Andere Bpt Gegensprechanlage Handbücher

Bpt

Bpt DDVC/08 VR Betriebsanleitung

Bpt

Bpt System 200 Audio O&M Bedienungsanleitung

Bpt

Bpt OPHERA Bedienungsanleitung

Bpt

Bpt MTMA/01 Betriebsanleitung

Bpt

Bpt PEC/01 Bedienungsanleitung

Bpt

Bpt DDVC/08 VR Bedienungsanleitung

Bpt

Bpt OPHERAKIT series Bedienungsanleitung

Bpt

Bpt HEV/300-302 VR Bedienungsanleitung

Bpt

Bpt AGATAKIT C 200 UK Bedienungsanleitung

Bpt

Bpt XC/200 Bedienungsanleitung

Bpt

Bpt HEC/301-304 VR Bedienungsanleitung

Bpt

Bpt CHORUS AESIS GW19001 Betriebsanleitung

Bpt

Bpt MTMRFID Betriebsanleitung

Bpt

Bpt VSE/200.01 Bedienungsanleitung

Bpt

Bpt LYNEA BASIC Bedienungsanleitung

Bpt

Bpt VIDEO SYSTEM 100 Bedienungsanleitung

Bpt

Bpt DVC/IP ME Bedienungsanleitung

Bpt

Bpt Futura X1 Bedienungsanleitung

Bpt

Bpt b-red VKW200 Bedienungsanleitung

Bpt

Bpt YVM/200 Bedienungsanleitung

Bpt

Bpt DMVC/01 Bedienungsanleitung

Bpt

Bpt Agata C 200 Leitfaden

Bpt

Bpt XC/310 Bedienungsanleitung

Bpt

Bpt AS/200 Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung