Braillo 300 S2 Bedienungsanleitung
User’s Guide
BRAILLO LNORWAY
FOR BETTER BRAILLE - AND MORE
BRAILLO 300 S2
Rev. June 2017
©- 2017 Braillo Norway AS
BRAILLO lNORWAY AS B 300 S2
3
BRAILLO e NOR
,�rJ1
BRAILLO lNORWAY AS B 300 S2
4
BRAILLO lNORWAY AS B 300 S2
5
TABLE OF CONTENTS
1. PRINTER BASIC .......................................... 7
2. INSTALLATION ........................................... 9
2.1 Unpacking ......................................................... 10
2.2 Removal of the side panels .............................................11
2.3 Removal of the top .................................................. 12
2.4 Connecting the printer to the mains and computer .......................... 13
2.5 Power on .......................................................... 15
3. OPERATING THE PRINTER................................ 16
3.1 Inserting paper...................................................... 16
3.2 Operating panel functions ............................................. 17
3.3 Explanationofthedierentmenuchoices ................................ 22
3.4 Messages/Error Messages ............................................ 30
3.5 Test Print .......................................................... 33
4. SERVICE AND MAINTENANCE ............................ 34
4.1 Printing principle.................................................... 34
4.2 Troubleshooting, incorrect Braille ...................................... 40
4.3 Magnet rack - removal ............................................... 43
4.4 Magnet rack - disassembly, step by step .................................. 44
4.5 Magnet - replacement ................................................ 46
4.6 Magnet rack - cleaning ............................................... 49
4.7 Magnet Rack - adjustment ............................................ 50
4.8 Magnetrack-rettingandadjusting .................................... 52
4.9 Beam and Paper shoes - overview ...................................... 58
4.10 BeamandPapershoes-removalandretting.............................. 59
4.11 Beam - replacement of short pivot arm................................... 61
4.12 Beam - replacement of printing pin ..................................... 62
4.13 Return spring adjustment ............................................. 63
4.14 Eccentrics adjustment, belt tension...................................... 64
4.15 Main sensor wheel - adjustment ........................................ 65
4.16 Paper feed assembly - removing ........................................ 66
4.17 Paper feed assembly - adjustment....................................... 67
4.18 Inductive sensors - adjustment ......................................... 68
4.19 Paper sensor - replacing .............................................. 69
4.20 Maintenance ....................................................... 70
5. PARTS - EXPLODED VIEWS ............................... 72
5.1 Magnet rack........................................................ 72
5.2 Beam ............................................................. 73
5.3 Paper shoe ......................................................... 74
5.4 Paper feed ......................................................... 75
5.5 Shafts, belt......................................................... 76
5.6 Top and bottom frame ................................................ 78
6. TECHNICAL SPECIFICATIONS ............................ 80
6.1 Technicalspecications .............................................. 80
6.2 Electric unit - overview............................................... 81
6.3 How to replace fuses................................................. 82
6.4 Main board - connections ............................................. 84
6.5 Escape-sequences ................................................... 85
BRAILLO lNORWAY AS B 300 S2
6
7. GENERAL INFORMATION ................................ 90
7.1 Declaration of conformity............................................. 90
7.2 Warranty .......................................................... 91
7.3 Addresses and phone numbers ......................................... 93
1. PRINTER BASIC
Thank you for your purchase of the Braillo 300 S2. Please read this manual carefully before installing
and operating this printer.
Key features
• Prints interpoint, both sides of the page are printed simultaneously
• Prints 300 characters per second
• Prints 900 pages per hour (on a 12-inch sheet)
• Self-test system that checks the magnets continuously during printing
• Reliable, sturdy construction
• SafetyswitcheswillturnthePrinteroifsomeoneaccidentallyopensthecoverwhileprinting
Maximizing the operational life of your Braillo printer
Many 30-year-old Braillo printers are still in daily operation – a testament to their quality. To maxi-
mize the life of your Braillo printer, we strongly recommend using the correct tools, which come with
your printer; as well as following the correct procedures, which we prescribe in the manual and rein-
force in our training courses.
Additionally, just as the wrong wrench can ruin a nut, using poor quality Braille paper can ruin the
printer’s pins, print shoes and moveable parts by causing them to wear out prematurely. Failures due to
user negligence of this nature, just as repairs carried out by untrained personnel, may compromise your
warranty rights.
BraillorecommendsusingourspecializedBraillepaperandhavingyourprinterservicedbycertied
technicians who have successfully completed our training course.
More information regarding our training courses can be found on our website:
http://braillo.com/braillo-services/
http://braillo.com/event-registration/
More information on our Braille paper can be found on our websites:
http://braillo.com/braille-paper/
http://braillepaper.com/
BRAILLO lNORWAY AS B 300 S2
7
Printer overview
Pleaseseethegurebelow:
Note that the right-hand and left-hand side are referred to as if you were standing behind the printer
facing the opening where the paper is inserted into the printer.
BRAILLO lNORWAY AS B 300 S2
8
Control
panel
Paper direction
2. INSTALLATION
Table:
The printer should be placed on a sturdy table. Please note that this printer weighs 130 kg.
Space:
The minimum space required for the Braillo 300 S2 is approximately 1.25m x 1.5m (4 x 5 feet). How-
ever, it will be more space required both behind and around the printer so that one can easily replace
the boxes of paper and perform regular maintenance without moving the printer.
Environment:
Braillo Printers are made to operate continuously and to be reliable for many years. However, sensi-
tive electronic and mechanical parts require a suitable installation environment to ensure long and
trouble-free operation. Temperature should be between 15° - 30° C (60° - 86° F), and relative humidity
between 40 and 60%.
Maintain a clean environment because dust may clog the Printer - especially when combined with high
humidity! Too low humidity should also be avoided to prevent electrostatic problems.
Some paper qualities may generate excessive paper dust. This should be removed with a vacuum
cleaner and a damp cloth. (About every 50,000 sheets).
Electrical:
Single phase 230 volt (+/- 10%), 50/60 Hz, circuit breakers should be min. 10 amps.
Be sure to consult your distributor/supplier for further details concerning the installation site.
Failure to meet the installation requirements may relieve the supplier of any warranty responsibilities.
BRAILLO lNORWAY AS B 300 S2
9
92 cm
67 cm
66 cm
2.1 Unpacking
Unpacking and installation can be done by the user.
Any kind of lifting of the printer must always be done from the base at the bottom of the printer, and
should be done with extreme care.
Make sure that your Braillo printer has not been damaged in transport. Check if the packing is
damaged; If so, it is possible that the printer has also been damaged or scratched. If any damages are
found, please contact your distributor or Braillo Norway AS immediately.
Also check that the printer is accompanied with the following items:
• Power cable for the printer
• Data cable, USB
• Data cable, ethernet (shielded)
• A small stack of paper
• User’s guide
• Tool kit for service and maintenance
• Test and packing list
If any of these items are missing, please contact your distributor or Braillo Norway AS.
Important !
Itisveryimportantthattheprinter’sspeciedvoltagevalue(230V,+/-10%)correspondswiththe
local mains power supply available.
If the plug on the mains power cable is to be replaced, note that the yellow/green wire is the grounding
(earthing) wire.
THE PRINTER MUST ALWAYS BE CONNECTED TO GROUND!
After the printer is unpacked, we advice that the transport box is stored for possible later use.
BRAILLO lNORWAY AS B 300 S2
10
Inhaltsverzeichnis
Andere Braillo Drucker Handbücher
