Brandt TG528BC1 Bedienungsanleitung

Gas hob operating guide

99637181_GB_B.qxd 12/05/05 11:15 Page 1

Contents

Using your hob in complete safety 4

What your hob looks like? 5

Installing your hob in all simplicity 5

Fitting recommendations 5-7

Electrical connections 8

Gas connections 9

Changing the type of gas supply for CHINA 10-11

Using your hob in all simplicity 12

How to use your gas burners? 12

Which pans are best adapted for use on the gas burner 13

How to look after your hob? 14

Minor troubleshooting 15

Gas-cooking guide 16

In this Manual,

displays safety instructions

displays tips and hints

99637181_GB_B.qxd 12/05/05 11:15 Page 2

Editorial

Dear Customer,

Thank you for buying a BRANDT hob.

Our design staff have produced a new generation of kitchen

equipment, to make everyday cooking a pleasure.

You will find that the clean lines and modern look of your Brandt

hob blends in perfectly with your kitchen décor. It is easy to use

and performs to a high standard.

Brandt also makes a range of products that will enhance your

kitchen such as hobs, extractor hoods, built-in dishwashers and

refrigerators. There are models to complement your new Brandt

hob.

Of course, we make every effort to ensure that our products meet

all your requirements, and our Customer Service department is at

your disposal, to answer all your questions and to listen to all

your suggestions.

Brandt has always been a leader in the development of new

products, thus enhancing the quality of everyday life by providing

increasingly efficient products, that are easy to use, respect the

environment, and are attractive and reliable.

The BRANDT name.

99637181_GB_B.qxd 12/05/05 11:15 Page 3

We have designed your hob for

private domestic use.

With a view to the constant

improvement of our products, we

reserve the right to make any

changes in their technical, functional

or aesthetic characteristics as a result

of technical evolution.

These hobs are designed exclusively

for the cooking of drinks and

foodstuffs. These products do not

contain any asbestos-based

component parts.

You must always keep an eye on your

cooking.

Read the instructions before installing

and using the apparatus.

Never leave any CLEANING or

INFLAMMABLE products in the

cupboard beneath your hob (aerosols

or other pressurised cans, papers,

recipe books, etc.).

Using a gas-powered hob produces

both heat and humidity in the room

where it is used. Make sure your

kitchen is well ventilated.

Keep all natural ventilation inlets

open or install a mechanical

ventilation device. Intensive and

Your hob in complete safety

prolonged use of this appliance may

require additional ventilation, (for

example by opening the window), or

more effective ventilation (for

example by increasing the power of

the mechanical ventilation if this

exists).

Disconnect your hob from both

electrical and gas supplies before

carrying out any maintenance

operations.

For safety reasons, do not forget to

close the main gas valve for built in

gas lines.

The connector pipe should remain

accessible along its entire length and

must be replaced before its expiration

date (marked on the pipe).

Regardless of the means of

connection chosen, ensure that this is

totally free of leaks following

installation using soapy water.

If a knob is difficult to turn, DO NOT

FORCE IT. Call up your installer.

Should a crack appear on the

glass, disconnect your appliance

immediately and contact your

After-Sales Service.

Using your hob in complete safety

YOUR HOB IS DELIVERED PRE-SET FOR USE WITH HONG KONG TOWN GAS.

99637181_GB_B.qxd 12/05/05 11:15 Page 4

Installing your hob in all simplicity

What your hob looks like?

Width Depth Height

Standard cutout 26,5 cm 48 cm Depending on the unit

Outside

dimensions above

the work surface

31 cm 51 cm 5 cm

Outside

dimensions below

the work surface

26 cm 47 cm 5,1 cm

①①Semi-fast burner

1,5 kW*

②②Extra-fast burner

3,1 kW*

(*Powers in Hong Kong

gas)

②②

①①

Fitting recommendations

This appliance should be installed by

a qualified technician / installer.

Prior to installation, ensure that the

local distribution conditions (nature

of the gas and gas pressure) and the

adjustment conditions of the

appliance are compatible.

This appliance must be installed and

connected in compliance with the

regulations in force, and used only in a

well-ventilated area. Consult the

instructions before installing and using

this appliance.

Since this appliance is not connected to a

combustion products evacuation device,

particular attention should be given to the

relevant requirements regarding

ventilation.

On this subject, combustion can take

place only if oxygen from the air is

present, so this air must be constantly

renewed and the combustion products

must be evacuated (a minimum air input

of 2 m3/hour per kW of gas energy is

required).

E.g. : for a 30 cm hob with 2 gas-rings

Total power: 4.6kW

4,6 kW x 2 = 9.2 m3/h

minimum flow-rate.

99637181_GB_B.qxd 12/05/05 11:15 Page 5

48 cm mini

3 cm mini

30 cm mini 30 cm mini

56/26,5 cm mini

5,3 cm mini

70 cm mini

The hob must be built into the work-

top of a support cupboard. This work-

top must be at least 3 cm thick and

heat-resistant or else coated with a

heat resistant material.

A side-clearance of at least 30 cm

should be left to the right and left of

the hob. A tall cupboard or partition

too close to the hob would hinder free

movement of kitchen utensils.

If a horizontal partition is put under

the hob, it must be placed between 10

and 15 cm from the bottom of the

work top. In any case, do not keep

any sprays or pressurized containers

in the compartment which could be

just under the hob.

Fitting recommendations (cont'd)

Installing your hob in all simplicity

To ensure sealing between the cupboard

and the worktop follow points below :

1- Remove the pan support grates, the

burner caps and heads after checking

their position.

2- Turn the hob over and place it gently

over the opening in the worktop paying

attention not to damage the control

knobs and lighters.

3- Stick the foam seal around the out-

side of the hob.

4- Put the hob back the right way up

and place the burners, caps and pan

grates back in position.

Seal

99637181_GB_B.qxd 12/05/05 11:15 Page 6

Installing your hob in all simplicity

- Place the hob in position in the cutout

on the worktop, pulling it forward as far

as possible.

- Put the burners, caps and pan grates

back in position.

- Connect the hob power supply cable

to the electrical installation of the kit-

chen. (See "Electrical connections" ).

- Connect the hob to the gas.

If you wish you can lock the hob into

position using attachments that come

with screws (see picture opposite) and

are secured to the corners of the

housing.

Only use the holes provided.

Stop screwing when the lug starts

to bend.

Do not use a power screwdriver.

Fitting recommendations (cont'd)

Holes for fixing

Fixing

lugs Worktop

99637181_GB_B.qxd 12/05/05 11:15 Page 7

Cable H05VVF - T105

or H05V2V2F - T90

Cross section of

conductors in mm2

Fuse

220-240 V~- 50 Hz

All-gas

3 conductors of

which 1 is to be

earthed

Installing your hob in all simplicity

Electrical connections

CROSS SECTION OF THE CABLE TO USE

Your hob is delivered with a three-

conductor (phase + ground + neutral)

H05VVF- T105 or H05V2V2F - T90

1mm² section cable, which must be

connected to a 220-240 V~single pha-

se mains supply by the intermediary of

a two phase + earth CEI 60083 stan-

dardised neutral plug, or a single pole

cut-off device with a contact opening

by at least 3,5mm.

In HONG KONG, you must use 3-pin

plug that comply with the relevant

safety standard BS 546.

The mains plug must be accessible af-

ter installation.

The protective conductor (green/yellow) is connected to the earth

connection on the hob and therefore must also be connected to an external

earth connection .

If the power supply cable is damaged, it must be replaced with a cable or a spe-

cial unit available from the manufacturer or his After Sales Service.

99637181_GB_B.qxd 12/05/05 11:15 Page 8

●Gas rating

Towngas

HONG KONG

340

165

MARK ON THE INJECTORS

This table shows the position of the injectors on your hob

depending on the type of gas you use. The number is

marked on each injector.

Appliance designed for installation in Hong Kong Towngas

HONG KONG

Hourly input -see below at 15°C at 1013 mbar 10 mbar

EXTRA FAST BURNER

Indicator marked on injector 340

Nominal heat rating (kW) 3,10

Low heat rating (kW) 0,700

Hourly output (l/h) 693

SEMI-FAST BURNER

Indicator marked on injector 165

Nominal heat rating (kW) 1,50

Low heat rating (kW) 0,500

Hourly output (l/h) 335

30 cm hob 2 gas rings

Total nominal heat rating (kW) 4,60

Maximum output (l/h) 1028

Installing your hob in all simplicity

Connecting the gas supply

If the hob is installed above an oven or if

the proximity of other heat generating ele-

ments threatens to cause the connection

to heat up, it is vital that the connection be

made using a rigid pipe. If a hose or soft

pipe is used, it must not come into contact

with any of the unit's moving parts or en-

ter an area that is likely to be obstructed.

●Preliminary remarks

The gas supply must be connected in

line with current regulations in the

country of installation.

99637181_GB_B.qxd 12/05/05 11:15 Page 9

Spanner

Line

Fig. 3

Fig. 2

Grill

Cover

Head

Dish

Upper side of the hob

Fig. 1

●Changing from HONG KONG

towngas to natural gas G20/20 mbar

for China

The changing from Hong Kong towngas to natural gas G20/20mbar for

CHINA must be realised by a qualified installer. He will find the injectors

and the spanner available from the manufacturer or its After Sales Service.

Installing your hob in all simplicity

Changing the type of gas supply for CHINA

When carrying out this operation, you

should successively:

➊

Change the injectors

❷

Adjust the retarder on the taps

➊

CHANGE THE INJECTORS in the follo-

wing way:

•

Remove the supports, and all the bur-

ner caps and heads.

•

Using the spanner supplied, unscrew

the injectors at the bottom of each dish

and remove them (fig 1).

- Replace these with the injectors

supplied in the wallet, in accordan-

ce with the gas rating table at the

end of the chapter; to do this:

➪ Screw in the injectors by hand un-

til they are tight.

➪ Put the spanner well onto the in-

jector.

➪ With a pencil draw a line on the

hearth plate as indicated (fig. 2).

➪ Turn the spanner clockwise until

the line appears on the other side

(fig. 3).Warning! Do not go

beyond this limit as you are

liable to cause damage.

➪ Put the burner heads, covers and

pan supports back in position.

99637181_GB_B.qxd 12/05/05 11:16 Page 10

Inhaltsverzeichnis

Andere Brandt Kochfeld Handbücher

Brandt

Brandt IB 61 Technisches Handbuch

Brandt

Brandt ti1000b Bedienungsanleitung

Brandt

Brandt TI200 Bedienungsanleitung

Brandt

Brandt TG2231BEL Technisches Datenblatt

Brandt

Brandt BPG3400W Kurzanleitung

Brandt

Brandt TE 210 FT1 Technisches Datenblatt

Brandt

Brandt TI616 Kurzanleitung

Brandt

Brandt TG890XC Kurzanleitung

Brandt

Brandt TE560 Series Kurzanleitung

Brandt

Brandt BPI1641PB Bedienungsanleitung

Brandt

Brandt TE217FS1 Einrichtungshandbuch

Brandt

Brandt TI1033B Bedienungsanleitung

Brandt

Brandt TV1000 Kurzanleitung

Brandt

Brandt BPG6210 Series Kurzanleitung

Brandt

Brandt BPI1638KB Bedienungsanleitung

Brandt

Brandt TE 600 WF1 Bedienungsanleitung

Brandt

Brandt TE576XS1 Bedienungsanleitung

Brandt

Brandt TV 1024 Bedienungsanleitung

Brandt

Brandt CH800CE Bedienungs- und Wartungshandbuch

Brandt

Brandt BPI1641PB Bedienungsanleitung

Brandt

Brandt TI213BS1 Bedienungsanleitung

Brandt

Brandt TV324XT1 Bedienungsanleitung

Brandt

Brandt TG2232BEL Technisches Datenblatt

Brandt

Brandt TG1089XC Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Siemens

Siemens EX875KYV1E Technisches Datenblatt

AEG

AEG CERAMIC HOB 6010 K Bedienungsanleitung

VALERA

VALERA CT 70A Bedienungsanleitung

Zanussi

Zanussi ZGF 6420 Bedienungsanleitung

Gaggenau

Gaggenau CI 273 Bedienungsanleitung

G3 Ferrari

G3 Ferrari Energy Bedienungsanleitung

Pkm

Pkm IN4B Bedienungsanleitung

Award

Award H903BG Bedienungsanleitung

Zanussi

Zanussi VCH 5005 RZ Bedienungsanleitung

Miele

Miele KM 523 Bedienungsanleitung

Hotpoint

Hotpoint IS67V8CCXT/E Bedienungsanleitung

AEG

AEG HK854870XB Bedienungsanleitung

Cookology

Cookology SEP600BK Bedienungsanleitung

Bauknecht

Bauknecht Hob Bedienungsanleitung

Zanussi

Zanussi ZGM 782 Bedienungsanleitung

dipo INDUCTION

dipo INDUCTION DIBK218S Bedienungsanleitung

Miele

Miele KM 5987 Bedienungsanleitung

Miele

Miele KM 360 G Bedienungsanleitung