Braun SensorControl BP 2550 Bedienungsanleitung

Type 6053

Sensor Control

BP 2550

BP 2550 Cover- 22.05.02

EK KURTZ DESIGN

I/O

mem

SYS

DIA

Puls

1 / min

mmHg

6063010_BP2550_S.1 Seite 1 Freitag, 7. Juni 2002 8:53 08

English 4, 13, 55

Français 14, 23, 55

Nederlands 24, 33, 55

Español 34, 43, 55

Português 44, 53, 55

Internet:

www.braun.com

6-063-010/00/VI-03/G2

GB/F/NL/E/P

Printed in Germany

Braun Infoline

Helpline

Should you require any further

assistance please call Braun (UK)

Consumer Relations on

0800 783 70 10

Helpline

1 800 509 448

Vous avez des questions sur ce

produit ?

Appelez Braun France

01 47 48 70 70

Servicio al consumidor para España:

9 01-11 61 84

Serviço ao Consumidor para Portugal:

808 20 00 33

Servizio consumatori:

800-44 00 11

Heeft u vragen over dit produkt?

Bel Braun Consumenten-infolijn:

(070) 4 13 16 58

Vous avez des questions sur ce

produit ?

Appelez Braun Belgique

(02) 711 92 11

IRL

6063010_BP2550_S.2 Seite 1 Dienstag, 8. April 2003 2:09 14

I/O

mem

SYS

DIA

Puls

1 / min

mmHg

BP 2550 Explo- 22.05.02 EK

KURTZ DESIGN

6063010_BP2550_S.3 Seite 1 Freitag, 7. Juni 2002 8:55 08

English

What you should know about blood pressure

Blood pressure constantly changes throughout the day. It rises sharply in the early

morning and declines during the late morning. Blood pressure rises again in the

afternoon and finally drops to a low level at night. Also, it may vary in a short

period of time. Therefore, readings from successive measurements can fluctuate.

Blood pressure readings from a healthy 31 year old male, measured at 5 minute

intervals

Blood pressure measured in a doctor's office only provides a momentary value.

Repeated measurements at home better reflect one's actual blood pressure

values under everyday conditions.

Moreover, many people have a different blood pressure when they measure at

home, because they tend to be more relaxed than when in the doctor's office.

Regular blood pressure measurements taken at home can provide your doctor

with valuable information on your normal blood pressure values under actual

«everyday» conditions.

The World Health Organisation (WHO) has set up the following standard blood

pressure values when measured at resting pulse:

Blood

pressure (mmHg)

Normal

values

Mild

hypertension

Severe

hypertension

SYS = Systole

= upper value

DIA = Diastole

= lower value

up to 140

up to 90

140 – 180

90 – 110

over 180

over 110

SYS

mm HG

140

120

100

65h12 18 0

DIA

mm HG

6063010_BP2550_S4-58 Seite 4 Dienstag, 8. April 2003 2:17 14

What you should know about this blood

pressure monitor

For accurate measurements, all wrist blood pressure

monitors must be positioned at heart level.

Example: If the monitor is positioned 20 cm below heart

level as shown on the left (e.g. by putting the arm on a

table), the reading you will obtain is approximately

15 mmHg too high.

Therefore, the Braun SensorControl has a unique

positioning system: The position sensor icon (A) on the

display guides you to hold your measuring arm in the

right position at heart level.

Additionally, your blood pressure monitor offers the

following benefits:

• Easy handling due to large buttons and the large

display.

• Automatic storage of the last 60 readings consisting

of blood pressure values, pulse, date and time of

measurement.

• Comfort cuff.

• To ensure accurate measuring results, carefully read

these instructions.

• This product is intended for household use only. Keep

product and batteries away from children.

• People suffering from cardiac arrhythmia, vascular

constriction, arteriosclerosis in extremities, diabetes

or users of cardiac pacemakers should consult their

doctor before measuring their blood pressure them-

selves, since deviations in blood pressure values may

occur in such cases.

• Please consult your doctor in case of any doubt,

especially if you are under medical treatment or

receiving medication.

• The use of this blood pressure monitor is not intended

as a substitute for consultation with your doctor.

20 cm

6063010_BP2550_S4-58 Seite 5 Dienstag, 8. April 2003 2:17 14

Product description

A Position sensor icon

B Memory button («mem»)

C «I/O»(on/off) button

D «Select»button

E Battery compartment

F Battery compartment cover

G Cuff

Inserting batteries

•Use alkaline batteries, type LR 03 (AAA) (e.g. Duracell

Ultra) as supplied with this product or rechargeable

batteries.

•Remove the battery compartment cover (F) and insert

two batteries with correct polarity (see symbol in the

battery compartment (E)).

•New batteries (Duracell Ultra) will provide approxi-

mately 300 measurements.

•Only discard empty batteries. They should not be

disposed of in the household waste, but at appropriate

collection sites or at your dealer.

Use of rechargeable batteries

In case rechargeable batteries are used, please note that

the «battery low»symbol may appear earlier on the

display than with alkaline batteries. However, this will not

affect the measuring accuracy.

Key rules for accurate blood pressure

measurements

•Always take readings at the same time of day,

ideally in the morning, under the same conditions.

•Do not measure within 30 minutes after smoking,

coffee or tea consumption.

•Take off wrist watch and jewellery before fitting the

appliance on the measuring arm.

•While taking a measurement, sit down, relax, keep still,

especially the hand of the measuring arm, do not move

or speak.

•Hold the appliance at heart level.

•Wait approximately 3 minutes before repeating a

measurement.

6063010_BP2550_S4-58 Seite 6 Dienstag, 8. April 2003 2:17 14

Measuring

For a reliable blood pressure measurement, make sure

that you hold the appliance at heart level. The position

sensor icon (A) will guide you to hold your arm in the right

position at heart level.

1. Fasten the appliance on the slim side of your bare

forearm.

Make sure that the cuff fits tight.

2. Press the red «I/O»(on/off) button (C).

3. Put the hand with the appliance on the other upper arm

as shown. Slowly move the hand upward along the

upper arm.

Watch the position sensor icon and move your hand

up or down according to the direction of the arrow(s)

shown.

4. The position sensor icon shown on the left and a beep

confirm that you have reached the right measuring

position. The measurement will start automatically.

When the measurement is complete, a beep will sound

again, and the reading is displayed.

Upper (systolic) value

Lower (diastolic) value

Pulse

6063010_BP2550_S4-58 Seite 7 Dienstag, 8. April 2003 2:17 14

Please note:

15 seconds after switching on the appliance, the

measuring process will start automatically, even if the

appropriate measuring position has not been reached.

If at any time, you want to discontinue the measurement,

press the «I/O»button.

Turning off the product

Press the I/0 button to turn the product off. Otherwise the

product will turn off automatically after 2 minutes.

Memory function

Your blood pressure monitor can store the readings of

60 measurements. Storing is done automatically without

having to press the memory button after a measurement.

The memory cannot be cleared. Once the memory is full,

the oldest values will be overwritten.

Recalling stored readings

To recall stored readings, first turn the product off, then

press the memory button («mem») (B).

The latest reading will be displayed. The lower display

line shows successively date, time and pulse of the

respective measurement.

The position sensor symbol ( ) shows that the

respective measurement was taken at heart level.

Repeatedly pressing the memory button will call up one

by one all stored readings (with date and time).

6063010_BP2550_S4-58 Seite 8 Dienstag, 8. April 2003 2:17 14

Scrolling

Keep the memory button pressed for scrolling through

the memory. For your orientation, refer to the date in the

lower display line.

Settings

By means of the «select»button (D) placed underneath

the battery compartment cover, you can adjust the

settings described below.

Time and date

First turn off the product. After pressing the «select»

button, the hour position of the time display flashes.

Using the memory button (B), you can change the hours.

Press the «select»button again to make the minute

(accordingly day / month) position flash and change

these positions using the memory button.

After having changed the time and date settings, press

the «I/O»button to confirm. The device will then turn off.

Position sensor

Should you wish to deactivate the position sensor

(e.g. because you want to measure while lying down),

proceed as follows:

First turn off the product. Briefly press the «select»

button. The display shows the time and date settings.

Then repeatedly press the «select»button until the

position sensor symbol will be displayed next to a

flashing «on».

Press the memory button to change the setting from

«on»(position sensor activated) to

«--»(position sensor deactivated).

To confirm the change of setting, press the «I/O»button.

Please note:

Unless you confirm a modified setting by pressing the

«I/O»button, the appliance will turn off automatically after

2 minutes without adapting the modified setting.

6063010_BP2550_S4-58 Seite 9 Dienstag, 8. April 2003 2:17 14

Storage and cleaning

Clean the product with a soft, slightly damp cloth. Stains on the cuff (G) can be

carefully removed with damp cloth. Do not wash or dry clean the cuff. Do not store

the product in a place exposed to direct sunlight or high humidity.

Calibration

This product has been calibrated at the time of manufacture. If used according to

the use instructions, periodic re-calibration is not required.

If at any time, you question the measuring accuracy, please contact a Braun

Service Centre.

Manufacturing date is given by the LOT number on the back of the product.

The first number after LOT represents the last digit of the year of manufacture.

The next three digits give the day of the year of manufacture.

An example: LOT 2116 xx xx –this product has been manufactured on the

116th day of the year 2002.

What to do if ...

Problem Reason Solution

Batteries are low.

Measurements still

possible.

With rechargeable

batteries, the «battery low»

symbol may appear earlier

than with alkaline

batteries.

Battery replacement required soon.

(flashing)

Batteries are flat. Memory

readings can be called up.

Measurements are not

possible.

Insert new batteries.

Cuff is too loose or

cannot be inflated.

Refit cuff tightly, repeat measurement

as shown and described under

«Measuring».

e.g. Error message higher

than 64:

Cuff is not properly fitted.

Refit cuff tightly, repeat measurement

as shown and described under

«Measuring».

6063010_BP2550_S4-58 Seite 10 Dienstag, 8. April 2003 2:17 14

Andere Handbücher für SensorControl BP 2550

Inhaltsverzeichnis

Sprachen:

Andere Braun Blutdruckmessgerät Handbücher

Braun

Braun ExactFit 5 Bedienungsanleitung

Braun

Braun BP 2510 Bedienungsanleitung

Braun

Braun BBP 2000 Bedienungsanleitung

Braun

Braun PrecisionSensor Pro BP 2590 Instructions Bedienungsanleitung

Braun

Braun ActivScan 9 Bedienungsanleitung

Braun

Braun ActivScan 9 Bedienungsanleitung

Braun

Braun SensorControl Easy Click Bedienungsanleitung

Braun

Braun VitalScan Bedienungsanleitung

Braun

Braun iCheck 7 Bedienungsanleitung

Braun

Braun VitalScan BP1750 Bedienungsanleitung

Braun

Braun ExactFit 5 Bedienungsanleitung

Braun

Braun VitalScan 5 Bedienungsanleitung

Braun

Braun BP6100 Bedienungsanleitung

Braun

Braun VitalScan BP1700 Bedienungsanleitung

Braun

Braun EXACTFIT 1 Bedienungsanleitung

Braun

Braun VITALSCAN BP1000 Bedienungsanleitung

Braun

Braun ActivScan 9 Bedienungsanleitung

Braun

Braun BP 3560 Bedienungsanleitung

Braun

Braun ExactFit 3 Bedienungsanleitung

Braun

Braun VitalScan BPW 4300 Bedienungsanleitung

Braun

Braun PrecisionSensor Pro BP 2590 Instructions Bedienungsanleitung

Braun

Braun BP 6200 Bedienungsanleitung

Braun

Braun BP 2510 Bedienungsanleitung

Braun

Braun EXACTFIT 1 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung