BRAYER BR1701 Bedienungsanleitung
Instruction manual
Инструкция по эксплуатации
Juicer BR1701
Соковыжималка BR1701
brayer.ru
СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................12
RU ...................................................................................................................................22
KZ....................................................................................................................................32
3
EN
AUGER JUICE EXTRACTOR
BR1701
Use the auger juice extractor to make fresh juice
from fruits or vegetables.
The auger juice extractors are also called «slow
juicers», they press rather than crush fruits or
vegetables like centrifugal ones, so with the auger
juice extractors cold-pressed juice is obtained. This
juice extraction technology makes cell structure,
microelements, enzymes and vitamins surely
preserved in juice.
DESCRIPTION
1. Feeding chute
2. Filter element
3. Auger
4. Juice collector
5. Juice spout
6. Power/reverse switch «l/0/R»
7. Juice cup
8. Pulp container
9. Pusher
10. Cleaning brush
EN
1
2
3
4
5
6
7 8 9 10
4 EN
Рiс. 1
Рiс. 8
Рiс. 2
Рiс. 9
Рiс. 3
Рiс. 10
Рiс. 4
Рiс. 11
Рiс. 5
Рiс. 12
Рiс. 6
Рiс. 13
Рiс. 7
5
EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the press Juicer; after reading, keep it for future
reference.
ATTENTION! Do not operate the Juicer for more than
20 minute at a time. Please wait a minimum of 10
minute before operating the Juicer again.
• Use the press Juicer for its intended purpose only, as
specied in this manual.
• Mishandling the Juicer can lead to its breakage and
cause harm to the user or damage to the user’s
property, which is not covered by warranty.
• Make sure that the operating voltage of the unit
indicated on the label corresponds to your home
mains voltage.
• Do not connect the unit to external timers or remotely
controlled mains sockets.
• Install and use the press Juicer on a at, dry, steady
surface with free access to the mains socket.
• Do not use the unit outdoors.
• It is recommended not to use the unit during lightning
storms.
• Protect the Juicer from impacts, falling, vibrations
and other mechanical stress.
• Never leave the unit connected to the mains
unattended.
• Do not use the unit near heating appliances, heat
sources or open ame.
• Do not use the Juicer in places where aerosols are
used or sprayed, and in proximity to inammable
liquids.
• Do not use the Juicer in proximity to the kitchen
sink, in bathrooms, near swimming pools or other
containers lled with water.
• If the Juicer is dropped into water, unplug it
immediately, and only then you can take the unit out
of water. Contact a service center to check or repair
the unit.
• Do not let the power cord touch hot surfaces and
sharp edges of furniture.
• Use only the removable parts supplied with the press
Juicer.
• Always check the lter element for mechanical
damage, if you nd any, do not use the juice extractor
until you replace the lter element.
• Do not use your ngers or any utensil other than the
included plunger while inserting fruits and vegetables
into the feeding chute.
• Do not disassemble the Juicer if the device is
plugged into the mains.
• Unplug the unit after usage or before cleaning. When
unplugging the Juicer, hold the power plug and
carefully remove it from the mains socket, do not pull
the power cord, as this can lead to its damage and
cause a short circuit.
6
EN
• Do not touch the unit body, the power cord and the
power plug with wet hands.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging lm. Danger of
suocation!
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the authorized service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains. When the unit is used in
the mains with 60 Hz frequency, it does not need any
additional settings.
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
7
EN
• Disassemble the Juicer and wash the parts that
come into contact with fruit and vegetables when the
Juicer is in use.
• Remove the pusher (9) from the feeding chute (1).
• Turn the feeding chute (1) with the lter element (2)
counterclockwise until the «▲» mark matches the «
» mark on the top of the motor unit and remove
them (Fig. 1).
• Remove the juice collector (4) from the motor unit
upwards (g. 2).
• Remove the auger (3) from the juice collector (4)
(g. 3).
• Wash the removed parts (1-2, 3, 4, 9), the juice cup
(7), the pulp container (8) and the cleaning brush (10)
with warm water and a neutral detergent, then rinse
and dry.
• Wipe the motor unit with a slightly damp cloth, then
dry.
JUICE EXTRACTOR ASSEMBLING
• Place the juice extractor on an even, dry and stable
surface so that an electrical outlet is always easily
accessible.
• Make sure before assembling the juice extractor
that the silicone seal on the underside of the juice
collector (4) is in place (g. 4).
Notes: the silicone seal must t tightly into its place of
installation, otherwise the juice may ow out of the juice
collector (4) during the operation and damage the juice
extractor.
• Install the juice collector (4) on the motor unit (g. 5).
• Install the auger (3) into the juice collector (4), make
sure that the auger (3) is correctly installed, it must
be mounted on the driving shaft and sink slightly into
the juice collector (4), otherwise the installation of the
lling chute (1) with the lter element (2) will not be
possible.
• Install the feeding chute (1) with the lter element (2)
on the juice collector (4), the «▲» mark must match
the « » mark on the top of the motor unit, turn the
feeding chute (1) with the lter element (2) clockwise
to « » (Fig. 7). Make sure the feeding chute (1) with
the lter element (2) are securely xed.
• Insert the pusher (9) into the feeding chute (1).
• Place the juice cup (7) under the spout (5) and install
the pulp container (8) (g. 8).
• The juice exractor is ready for use.
TIPS
• The Juicer is not intended for extracting juice from
fruits, containing high levels of
• pectin or starch, such as bananas, papayas, gs,
avocados, and etc., bananas contain little to no juice,
only add them for the scent.
• The Juicer is not intended to process too hard high-
ber foods, such as, coconuts, quinces, rheum, and
etc.
• Use other types of kitchen appliances to process
those kinds of food.
8
EN
• Only use ripe fruit and fresh vegetables, as they
contain most juice.
• Various fruits (apples, grapes, pineapples, and etc.)
and vegetables (carrots, beetroot, celery stalks,
spinach, cucumbers, tomatoes, and etc.).
• Wash and dry fruit and vegetables thoroughly before
extracting juice from them.
• Berries are quick to lose their freshness, wash them
immediately before juicing.
• Removing only the thicker skins of such ingredients
as, for example, pineapples. Removing the thinner
ones is not necessary.
• Choose the apple cultivar according to your needs;
remember that the richness of the juice will depend
on the cultivar.
• It is desirable to remove cores while pressing apple
juice, otherwise the normal juice extractor operation
may get aected.
• Apple juice quickly darkens, to slower this process
add a few drops of lemon juice.
• Drink juice immediately following its extraction; if left
in open air, it will lose its taste and nutritional value.
• If you are planning to store the juice, pour it into an
airtight container and keep in a refrigerator.
• Do not store the juice in metal containers – it can
acquire metal taste.
MAKING JUICE
ATTENTION!
- Do not operate the Juicer for more than 20 minute
at a time. Please wait a minimum of 10 minute
before operating the Juicer again.
- Always check the grate lter element (2) for
damages before assembling the Juicer.
- Do not use the Juicer if the grate lter element (2)
is damaged.
• Prepare fruits or vegetables, wash them thoroughly,
remove inedible parts from fruits such as stems, peel
pineapple hard shell, remove cherry or peach pits, cut
fruits or vegetables into max. 5x2 cm strips or 3x3 cm
pieces
• Make sure the juice extractor is correctly assembled,
see the paragraph «juice extractor assembling».
• Open the lid of the juice spout (5) (g. 9).
• Connect the power plug to an electrical outlet.
• Switch the juice extractor on by setting the switch (6)
to the «l» position.
• Put fruits or vegetables into the feeding chute (2 1)
only while the auger (3) is rotating and slightly press
them with the pusher (1 9).
• Only put fruit and vegetables into the feeding chute
(9), when the grate auger (4) is rotating, while lightly
pushing them through with the plunger (9). Avoid
applying excessive force when pushing the plunger (9).
9
EN
• Do not use your ngers or any utensil other than
the included plunger (9) while inserting fruits and
vegetables into the feeding chute (1).
• Regularly check the lter element (2) for clogging
with pulp, if necessary switch the juice extractor o by
setting the power switch (6) to the «0» position, and
disconnect the power plug from the electrical outlet.
• Turn the feeding chute (1) with the lter element (2)
counterclockwise until the «▲» mark matches the «
» mark on the top of the motor unit and remove
them (Fig. 1), rinse the lter element (2) under running
water and install it back by turning the feeding chute
(1) with the lter element (2) clockwise to « » (Fig. 7).
Make sure the feeding chute (1) with the lter element
(2) are securely xed, insert the power cord plug into
an electrical outlet, switch the juice extractor on to
continue the operation.
• To mix dierent juices while the juice extractor is
running you can close the juice spout (5) lid (g. 9) and
continue pressing juice from another fruit or vegetable,
then open the spout (5) lid and pour the juice into the
cup (7).
• Close the spout (5) lid when pouring the juice from the
cup (7) or when the juice extractor operation is nished.
• If the auger (3) slows down during the juice extractor
operation, immediately switch the juice extractor o by
setting the power switch (6) to the «0» position, after
the auger (3) stops rotating, move the power switch (6)
to the «R» position and hold it, the auger (3) reverse
rotation function will be activated. After a few seconds
release the power switch (6), disconnect the power
cord plug from the electrical outlet, turn the feeding
chute (1) with the lter element (2) counterclockwise
until the «▲» mark matches the « » mark on
the top of the motor unit, and remove them (g. 1),
eliminate the cause of the auger (3) slow rotation.
Having eliminated the cause, install the feeding chute
(1) with the lter element (2) and continue using the
juice extractor.
• Once the juice container (7) has lled up, turn the
Juicer o and pour the juice into a suitable container,
place the juice container (7) under the juice spout (5).
• Keep the juice container (8) full, turn o the juicer
and remove the juice from the container (8).
Note: for your convenience, place an appropriately-
sized bag into the pulp container (10) to remove the
pulp together with the bag.
• Once you nish using the Juicer, turn it o by setting
the power (6) to «0», and unplug it from the mains.
OVERHEATING PROTECTION
• Exceeding the operating temperature will trigger the
overheating protection and the Juicer will turn o.
• Should the Juicer turn o on its own, set the power
(6) to «0» and unplug it from the mains.
• Depending on the room temperature, the electric
motor can take from 20 to 50 minutes to cool down,
10
EN
once it has cooled down, plug it into the mains and
turn the Juicer on.
• Should the Juicer fail to turn on, wait for some time,
if nothing changes this might indicate another defect.
In this case, please, contact an authorized service
center.
• Do not exceed the recommended operation time.
CLEANING AND CARE
• Perform cleaning of the Juicer after each use.
• Turn o the Juicer and unplug it from the mains
before cleaning.
• Remove the pusher (9) from the feeding chute (1).
• Turn the feeding chute (1) with the lter element (2)
counterclockwise until the «▲» mark matches the «
» mark on the top of the motor unit and remove
them (Fig. 1).
• Remove the juice collector (4) from the motor unit
upwards (g. 2).
• Remove the auger (3) from the juice collector (4)
(g. 3).
• Remove the silicone seal on the bottom of the juice
collector (4) (g. 10).
• Remove the seal ring from the central part of the
juice collector by pressing it and pushing it inside the
juice collector (4) (g. 11).
• Wash the removed parts (1-2, 3, 4, 9), the juice cup
(7), the pulp container (8) and the seal ring with warm
water and a neutral detergent, then rinse and dry.
• Install the silicone seal on the bottom of the juice
collector (4) (g. 4).
• Place the seal ring back to its place so that one seal
rib remains outside the juice collector (4) (g. 13) and
the other ones are inside the juice collector (4).
• Use the brush (10) to clean the lter element (2) and
other hard-to-reach places.
• Do not wash the removable parts of the Juicer in a
dishwasher.
• Clean the motor unit with a slightly damp tissue, then
wipe it dry.
• Do not use metal scouring pads, abrasives, or
solvents for cleaning the Juicer.
• Fruits and vegetables with painting properties,
blackberries, carrots, or beetroot, for example, can
color certain parts of the Juicer. If this happens you
can try clearing the paint with a dry tissue soaked
in vegetable oil, followed by washing the parts with
warm water and a neutral detergent, rinsing, and
drying them.
STORAGE
• Perform a cleaning of the Juicer before taking it away
for storage.
• Keep the Juicer in a dry cool place unreachable by
children or people with disabilities.
Inhaltsverzeichnis
Sprachen:
Andere BRAYER Entsafter Handbücher
BRAYER
BRAYER BR1700 Bedienungsanleitung
BRAYER
BRAYER BR1711 Bedienungsanleitung
BRAYER
BRAYER BR1704 Bedienungsanleitung
BRAYER
BRAYER BR1703 Bedienungsanleitung
BRAYER
BRAYER BR1709 Bedienungsanleitung
BRAYER
BRAYER BR1705 Bedienungsanleitung
BRAYER
BRAYER BR1707 Bedienungsanleitung
BRAYER
BRAYER BR1710 Bedienungsanleitung
BRAYER
BRAYER BR1706 Bedienungsanleitung
BRAYER
BRAYER BR1702 Bedienungsanleitung
