BRC IR 1000 Bedienungsanleitung

0perating instructions

Infrared heaters

IPX5

- IR 1000

- IR 1500

- IR 1800

- IR 3000

- IR 3600

- IR 4500

Pourquery

Test report : RD05606_0_FR

RD07939_0_FR

12/12/13

Before using the product, read the instructions carefully.

BRC SAS cannot be held responsible for any damage to persons or things as a result of

noncompliance with the instructions below.

Compliance with all the information given in this booklet will ensure a long life as well

as electrical and mechanical reliability of the device. Keep this instruction booklet.

IMPORTANT INFORMATION FOR DISPOSAL COMPATIBLE WITH THE ENVIRONMENT .

IN SOME COUNTRIES OF THE EUROPEAN UNION, THIS PRODUCT DOES NOT FALL

WITHIN THE SCOPE OF APPLICATION OF NATIONAL LAW OF ACCEPTANCE OF RAEE

DIRECTIVE AND IS THEREFORE SUBJECT TO ANY OBLIGATION OF SORTING THE END

OF LIFE .

This product complies with EC Directive EU2002.96 . The symbol of the crossed out

trash on the device indicates that when the product reaches its end of life, it must be

subject to special treatment and should be entrusted to a sorting center for electrical

and electronic appliances or be returned to the seller to purchase a new equivalent.

User is responsible for the transfer of the unit at the end of life for appropriate sorting

structures, subject to penalties under the legislation on waste. Sorting and recycling the

dismantled unit helps to prevent potential negative effects on the environment and on

health and promotes recycling materials the product is made of. For more detailed

information about the collection systems available, contact your local waste disposal

service or the shop where the purchase was made. Producers and importers assume

their responsibilities for recycling, treating and disposing in an environmentally

compatible way, either directly or by participating in a collective system.

DESCRIPTION

IR is an extremely versatile infrared heater. It can be used in different situations and is a

calorie booster for all your activities. It’s warmth is immediate and it consumes little

power, it takes up little space but it can heat large spaces. IR has been designed and

assembled with the best standard components and / or certificates for safe use.

ACCESSORIES

- cable or junction box for power connection

- protection grid

- Adjustable Wall Mounting

WARNINGS

Do not use this product for purposes other than those described in this manual.

1 . After removing the product from its packaging, make sure of its integrity. In case of

doubt, contact the manufacturer immediately or a Technical Assistance Center allowed.

2 . Keep packaging parts out of the reach of children or dependent persons .

3 . Do not sit and do not place objects on the unit .

4 . Do not use the device in the presence of flammable vapors or substances such as

alcohol , insecticides , gasoline, etc. ...

5. If you decide to permanently remove the unit, disconnect before storing it out of the

reach of children and dependent persons . In addition , we recommend making it

unusable by cutting off its power cord.

6 . Do not use the unit right next to a bathtub, a shower or a swimming pool : follow in

all cases the safety distances prescribed by your local regulations.

7 . Do not touch the appliance with wet hands.

8 . Do not touch the appliance with bare feet.

9 . This device is not suitable for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience or knowledge of the

operation, unless they have been educated or trained for use of the unit by a person

responsible for security. Children should be supervised to ensure they do not play with

the appliance.

10 . The temperature of the unit during operation is particularly high and it is necessary

to avoid contact with hot surfaces with bare skin. Before any intervention, it is advisable

to turn off the power and wait at least 5 minutes.

11 . Do not make any changes of any kind whatsoever to the device.

12 . Extra care when used in unsupervised spaces.

13. Visually inspect the unit periodically to ensure its integrity. If an error is detected

avoid using it and contact the manufacturer or the authorized Technical Assistance

Centre immediately.

14. The facility will incorporate a means for disconnection in the fixed wiring in

accordance with the installation requirements.

15 . The device must be properly connected to an electrical circuit in compliance with

standards and equipped with an effective mass. In case of doubt, perform the

appropriate check by a professionally qualified staff.

16. Product installation must be carried out in accordance with the instructions in this

manual, by a professionally qualified staff. All mounting and / or incorrect electrical

connections can cause damage to people, animals and objects BRC SAS cannot be held

responsible.

17. Only connect the device to the power supply circuit if the voltage and the scope of

the system correspond to the data plate on the device and do not exceed the maximum

power .

18 . Before performing any cleaning or maintenance , switch off and disconnect the

electrical circuit.

19. If the product falls or gets beaten , request a review by the manufacturer or the

authorized Technical Assistance Centre immediately.

20 . During handling interventions, do not touch the lamp directly but act only on the

ends. The lamp is damaged by contact with bare hands, in this case, the product

warranty coverage is cancelled.

21. Accidental contact with the surface of the bulb, proceed to the immediate cleaning

with a cloth moistened with alcohol .

22. In case of malfunction and / or failure, turn off the power immediately and contact

the manufacturer or the authorized Technical Assistance Centre .

23. To avoid danger, for any repairs, require the use of original spare parts .

24 . Turn the power off when: a) you encounter a malfunction b) you decide to

maintain or external cleaning c) you decide not to use the unit for a long time.

25 . Do not cover or obstruct the front grid where the heat comes .

26. Do not cover or obstruct the device during operation.

27. Ensure the cleanliness of the front grid.

28. To avoid risk of fire, do not install and heat near or towards curtains, beds or other

flammable objects elements, in any case, make sure the unit is positioned to a sufficient

distance to avoid the risk of damage or fire.

29. When used with automatic ignition devices, ensure that they are sized by a certified

installer.

30 . The protection system of the device has been specially designed to prevent direct

access to the radiating elements, so it should not be removed during operation.

- IR 1500 and 3000 to a single phase 220-240 V whose electrical wire section is 1.5 mm

².

- IR 4500 to a three-phase 380 V power tetra ( H05VV -F , 5 x 2.5 mm ²)

hat the power supply is adapted to the electrical load to install

immediately by wiping with a cloth moistened with alcohol

Do not cover or obstruct the device during operation

by the assistance service or a qualified technician.

l IR near curtains or umbrellas, make sure the device does not

get in contact with them.

INSTALLATION

IR must be fixed to the wall using the supplied bracket screw and 60 cm from the

ceiling (see installation example ) .

Ideally, it should be installed at a height of 2.50 m to 3 m and in any case not less

than 1.80 m.

The wall installation provides the best heat result with an inclination of 45 ° and the

device positioned perfectly horizontal. The device must not be installed under a

socket.

1) Set the reflector of IR in the beam direction required for wall mounting . There is

normally an inclination of about 45 ° relative to the horizontal position.

2) Never install IR on a flammable surface or direct it to a flammable surface.

3) IR must be placed at a clear distance (line of sight ) not less than 2 m from objects

as cardboard , cloth, etc. .... If placed in workshops and garages using flammable or

combustible paints, IR must be placed at least 4 m from the source of danger.

4) It is advisable not to install IR in very dusty environments , to avoid damaging the

lamp.

WALL INSTALLATION

Always place IR horizontally, as shown in the diagram.

MAINTENANCE AND LAMP REPLACEMENT

The lamp replacement should only be performed by the manufacturer, by the

assistance service or a qualified technician. It is advisable to occasionally dust the

dish and the lamp using a brush or compressed air to still get the caloric efficiency of

IR.

RADIANT WIRING DIAGRAM

IR 1000 / IR1500 / IR 1800

IR 3000 / IR 3600

IR 4500

SPARE PARTS

Exploded diagram IR 1000 / IR 1500 / IR 1800

Exploded diagram IR 3000 / IR 3600

Exploded diagram IR 4500

WARRANTY CERTIFICATE

We thank you for your purchase of our patio heaters IR. The warranty period is 24

months from the date of purchase of the device and it stops after a prescribed period

The sales receipt or other document, mandatory for taxes, shows the starting date of

the warranty. We guarantee all substitutions or repairs required due to defects in

materials or construction. The replacement or repair subject to normal wear parts are

therefore excluded (lamp, etc ...)

The guarantee is not recognized if the unit has been mistreated or when it has been

damaged due to the negligence of the user, maintenance made by unauthorized

person, because of personal transport, when the operating instructions have not

been applied or when it was installed without regard to standards.

The warranty does not provide the substitution of the device. Repairs considered by

the warranty are performed free of charge for returned goods delivered and duty

paid to BRC workshop or to our distributors. Therefore only the shipping costs are

the responsibility of the customer.

21, rue des Coteaux de Grand Lieu

44830 Bouaye –France

www.brcsa.com

Tel. : 33.(0)2.40.34.92.36

Fax : 33.(0)2.40.34.74.76

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BRC Heizung Handbücher

BRC

BRC INOXTRAP IP 65 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung