Breezy BB01-WC Bedienungsanleitung
D001128 Rev A.1 www.BuildWithRobots.com Page 1
User Manual
Breezy Smart Controller (SKU: BB01-WC)
D001128 Rev A.1 www.BuildWithRobots.com Page 2
Manufacturer and Contact
Information
Manufacturer: Build With Robots
Address: 429 Commercial Street NE
Albuquerque, NM 87102
For product information, sales, service, and technical support:
https://buildwithrobots.com/
Customer Support Phone: (833) 273-3991
Email: info@buildwithrobots.com
This manual covers the model: Breezy Smart Controller (BB01-WC)
SPECIFICATIONS:
Dimensions: 134.5 × 65 × 17.5 mm (5.3 x 2.56 x 0.69 inches)
Weight: 224.5 g (0.495 pounds)
USB: Type C
Wi-Fi: WLAN 802.11 a/b/g/n/ac 2.4GHz/5GHz
Bluetooth: Bluetooth 4.2
Splash, Water & Dust Resistant: IP68 Water / Dust Resistant
D001128 Rev A.1 www.BuildWithRobots.com Page 3
Environmental Considerations
This section provides information about the environmental impact of
the product.
Product End-of-Life Handling
Observe the following guidelines when recycling an instrument or
component:
Equipment recycling. Production of this device required the
extraction and use of natural resources. The device may contain
substances that could be harmful to the environment or human
health if improperly handled at the product’s end of life. To avoid
the release of such substances into the environment and to reduce
the use of natural resources, we encourage you to recycle this
product in an appropriate system that will ensure that most of the
materials are reused or recycled appropriately. It is recommended
that this device be taken to a certified Waste Electronic and
Electrical Equipment recycler.
Do not throw in trash at end of product life.
D001128 Rev A.1 www.BuildWithRobots.com Page 4
Contents
Manufacturer and Contact Information............................................................................................ 2
Environmental Considerations ............................................................................................................. 3
BB01-WC Breezy Smart Controller Setup ........................................................................................... 5
Controller navigation overview ...................................................................................................5
Connecting to Wi-Fi.........................................................................................................................6
Setting lock screen PIN (optional) ..............................................................................................8
Updating Android Kiosk PIN for Wi-Fi and settings (optional) .............................................9
Log-in.................................................................................................................................................10
Settings Page Overview ...............................................................................................................12
Pairing ...............................................................................................................................................13
Forget Device..................................................................................................................................14
Configuration ..................................................................................................................................17
Alias Button (Rename)..................................................................................................................17
Fogging Duration Button ..............................................................................................................18
Schedule Button .............................................................................................................................20
Update Dialog.................................................................................................................................23
View Log...........................................................................................................................................24
Lock and Unlock Devices............................................................................................................24
Remote Controlled Operation........................................................................................................28
Troubleshooting...................................................................................................................................... 30
LIMITED WARRANTY (USA/CANADA)................................................................................................. 31
D001128 Rev A.1 www.BuildWithRobots.com Page 5
BB01-WC Breezy Smart Controller
Setup
It is recommended that you charge the controller fully before use.
Controller navigation overview
Basic controls are the same as an Android phone.
1. The Home button is located at the center-bottom of the screen
(left picture above).
2. The recent button is located at the bottom right of the screen
(right picture above). This button can be used to close or
quickly refresh the Breezy Blue app if problems are
encountered.
3. Power button. This is used to shut down and restart the
controller.
D001128 Rev A.1 www.BuildWithRobots.com Page 6
Connecting to Wi-Fi
Connecting to Wi-Fi is required for receiving app and firmware
updates. App updates will occur automatically if connected to Wi-
Fi.
1. Power controller on
2. Select settings from the icon on the main screen
a. If you don’t see the icon, press the home button on
the controller
3. Enter 0000, then press OK
4. Select Gear in top right corner
5. Select Network & Internet
6. Select Wi-Fi
7. Select the Wi-Fi network you would like to connect to, enter the
password, and press CONNECT.
D001128 Rev A.1 www.BuildWithRobots.com Page 7
Setting screen timeout (optional)
1. Select settings from the icon on the main screen
2. Enter 0000, then press OK
3. Select Hardware
4. Select Display Timeout (seconds)
5. Select the preferred display timeout from list of options.
D001128 Rev A.1 www.BuildWithRobots.com Page 8
Setting lock screen PIN (optional)
1. Select settings from the icon on the main screen.
2. Enter 0000, then press OK.
3. Select the settings gear.
4. Select Security
5. Select Screen lock
6. Select PIN (or other options) and follow in screen instructions
If you choose to change the default PIN to a customized PIN, BWR
will NOT be able to recover your controller in the event you lose or
forget your customized PIN.
D001128 Rev A.1 www.BuildWithRobots.com Page 9
Updating Android Kiosk PIN for Wi-Fi and settings (optional)
1. Select settings from the icon on the main screen.
2. Enter 0000, then press OK.
3. Select Admin
4. Select Settings Password and follow on-screen instructions to
set a new PIN, then press OK. This PIN is used to configure any
system settings on the controller.
5. Select Wi-Fi Settings Password and follow on-screen
instructions to set a new PIN, then press OK. This PIN is only
used for updating Wi-Fi settings on the controller.
If you choose to change the default PIN to a customized PIN, BWR
will NOT be able to recover your controller in the event you lose or
forget your customized PIN.
D001128 Rev A.1 www.BuildWithRobots.com Page 10
Log-in
Press the physical home button on the controller.
1. Select the Breezy Blue logo on the upper left-hand side of the
screen to open the app –if it doesn’t open automatically.
2. Select CONTINUE AS GUEST or CREATE ACCOUNT to proceed as
a first-time user. BWR strongly recommends creating an account
for the first-time users and staying signed in for device security
management. If CREATE ACCOUNT is selected, an email and a
numeric password will be required.
3. After successfully creating the account, return to the SIGN IN
page and sign in with the credentials used in step 2.
Note: Please save the user and password in a safe place for future
reference.
Inhaltsverzeichnis
Andere Breezy Controller Handbücher
