Bresser 2010100 Bedienungsanleitung
1
Art. No. 2010100
WIFI 3D Printer
Instruction manual
1. Do not remove the nozzle housing!
2. Hot surface! Do not touch the nozzle that is heating
up during operation!
3. Risk of injury due to moving printer parts.
Do not wear gloves or other things that can get tangled
during operation!
WARNING!
2
Bresser GmbH has issued a “CE Declaration of Conformity” in accordance with applicable
guidelines and corresponding standards. The full text of the CE Declaration of Conformity is
available at the following internet address:
www.bresser.de/download/2010100/CE/2010100_CE.pdf
Bresser GmbH has issued a “UKCA Declaration of Conformity” in accordance with applicable
guidelines and corresponding standards. The full text of the UKCA Declaration of Conform-
ity is available at the following internet address:
www.bresser.de/download/2010100/UKCA/2010100_UKCA.pdf
BRESSER UK Ltd.
Suite 3G, Eden House · Enterprise Way · Edenbridge, Kent TN8 6HF · Great Britain
3
Table of Contents
Info, Update/After Sales Support/Warranty����������������������������� 02
General Safety Instructions ���������������������������������������������������� 03
Terms������������������������������������������������������������������������������������� 05
Chapter 1: About the 3D Printer ���������������������������������������������� 06
1.1 Components Introduce........................................................................................................06
1.2 Reference................................................................................................................................07
Chapter 2: Operating �������������������������������������������������������������� 08
2.1 - Unpacking ....................................................................................................................................................08
2.2 - Accessories .................................................................................................................................................10
2.3 - Interface .......................................................................................................................................................11
2.3.1 - Build .....................................................................................................................................11
2.3.2 - Tools ....................................................................................................................................13
2.3.2.1 - Network ...................................................................................................................13
2.3.2.2 - Preheat.....................................................................................................................18
2.3.2.3 - Setting......................................................................................................................19
2.3.2.4 - About........................................................................................................................22
2.3.3 - Filament ..............................................................................................................................23
2.4 - Print ...............................................................................................................................................................24
2.4.1 - Load Filament ....................................................................................................................24
2.4.2 - Model File Transfer ...........................................................................................................26
2.4.3 - Print......................................................................................................................................28
2.4.4 - Model Remove...................................................................................................................29
2.4.5 - Replace Filament...............................................................................................................30
2.5 - The Guide of Using Camera......................................................................................................................31
Chapter 3: Q&A����������������������������������������������������������������������� 37
Chapter 4: Support and Service ���������������������������������������������� 40
4
More Informations, Updates and Software
Visit our website using the following QR codes or web links to nd additional information,
available updates or software for this product or related accessories:
3D Printer Accessories
www.bresser.de/P2010100
www.bresser.de/P2080200000000
After-Sales-Support / Service
We oer an individual service for this product beyond the purchase. If you have any problems
with the product, our support team will be happy to assist you.
For a smooth process, please keep the following information handy for possible inquiries:
• Service/warranty card
• Article number and description
• Date of purchase and dealer
Contact details:
E-Mail: service.3d-printer@bresser.de (preferred communication)
Internet: www.bresser.de/c/en/service
Telephone*: 00 800 – 63 43 7000
Service times:
Monday to Friday (except for holidays) 9 a.m. to 4:00 p.m.
*free hotline
Warranty
Please refer to the separate service/warranty card for warranty information.
5
Safety Notice
PLEASE READ AND STRICTLY FOLLOW ALL THE
SAFETY WARNINGS AND NOTICE BELOW�
Work Environment Safety
Electrical Safety
Personal Safety
Cautions
• You must always keep your workingspace clean.
• Dont use the Wi 3D-Printer near inammable liquids, gas or dust.
• Keep the W-LAN 3D printer out of reach of children and untrained persons.
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after nishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
Do not operate the device while you are tired or under the inuence of drugs, alcohol or
medication.
• Only connect the W-LAN 3D Printer to a properly grounded power outlet.
• Do not use Adventurer 3 in damp or wet locations. Do not expose Adventurer 3 to burning sun.
• Avoid using the device during an thunderstorm.
• Unplug the device from the power supply if you do not use it for a longer time.
• Do not touch the nozzle and build plate during printing.
• Do not touch the nozzle after nishing printing
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
• Do not operate the device while you are tired or under the inuence of drugs, alcohol or
medication
• Do not leave the device unattended for long.
• Do not make any modications to the device.
• To lower the build plate before loading/unloading lament. (The distance between the
nozzle and build plate should be kept for at least 50mm)
• Operate the device in a well-ventilated environment.
• Never use the device for illegal activities.
• Never use the device to make any food storage vessels.
• Never use the device to make any electrical appliance.
• Never put the model into your mouth.
6
Environment Requirements
Place Requirements
Filament Requirements
Legal Notice
• The device must be placed in a dry and ventilated environment. The distances of the left,
right and back side space should be at least 20cm, and the distance of the front side
space should be at least 35cm. Device storage temperature: RT 0-40C°
• Do not abuse the lament. Please make sure you use the FlashForge lament or the
lament from the brands accepted by FlashForge. Nozzle clogging and damage may be
caused by non-FlashForge lament due to inappropriate material properties.
All the information in this document is subject to any amendment
or change without the ofcial authorization from BRESSER.
BRESSER CORPORATION MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRATIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
BRESSER shall not be liable for errors contained herein for incidental consequential
damages in connection with furnishing, performance or use of this material.
This document contains proprietary information protected by
copyright. Copyright © 2020 BRESSER Corp. All Rights Reserved.
• All polymers degrade with time. Do not unpack lament until ne-
cessary. Filament should be stored at clean and dry conditions.
Filament Storage
• Temperature: RT 15-30°C; Moisture: 20%-70%
• All the information in this document is subject to any amendment or change without the
ofcial authorization from BRESSER.
• BRESSER CORPORATION MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRATIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
• FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
• BRESSER shall not be liable for errors contained herein for incidental consequential dama-
ges in connection with furnishing, performance or use of this material.
• This document contains proprietary information protected by copyright. Copyright © 2020
BRESSER Corp. All Rights Reserved.
7
Terms
Build Plate
Extruder
Build Volume
Build Tape
Nozzle
Cooling Fan
Filamentbox
Filament Guide Tube
Filament Intake
The surface on which the WIFI 3D Printer builds an object.
The black tape that covers WIFI 3D Printer’s build plate so that the
object can stick to the build plate well.
The three dimensional amount of space that an object will use once
it is completed. The largest build volume is 150*150*150mm.
The integral extruder device installed on X-Axis. Extruder draws the
lament from the spool, melts it and pushes it through a nozzle into
the build plate.
Also called “print head”, which located at the bottom of the extruder
where heated lament is squeezed out.
To cool the outer assembly of the extruder and gear motor.
A specic box for placing the Filament, which is located on the right
of the printer.
A white plastic tube that guides the lament from the lament box
to the lament intake
.
An opening located at the top of the extruder.
2
3
4
5
16
7
8
9
22
23
10
13
11
12
14 15
21
16
17
18
19
20
24
25
26
8
Chapter 1: About WIFI 3D Printer
1�1 Components Introduce
1. Filament guide tube 2. Filament guide tube joint 3. Extruder base
4. Cooling Fan 5. Removable nozzle 6. Extruder cables 7. Clip
8. Led light 9. Air guide 10. Front door 11. Y-Axis sliding slot
12. Platform base 13. Removeable Build Plate
14. Touchscreen 15. USB stick input 16. Power Switch 17. Power Input
18. Spool holder 19. Filament Cover 20. Filament cover handle 21. Motor
22. Filament Intake 23. Filament feeding wheel 24. Top cover 25. Air outlet
26. Ethernet input
9
Name
Number of Extruder
Print Technology
Screen Size
Build Volume
Layer Resolution
Build Accuracy
Positioning Accuracy
Filament Diameter
Software
Memory Size
OS
AC Input
Connectivity
Device Size
Net Weight
WIFI 3D Printer
1, Removable
Fused Filament Fabrication (FFF)
2,8° color IPS Touch Screen
150x150x150mm
0.1-0.4mm
±0.2mm
Z axis 0.0025mm; XY axis 0.011mm
1.75mm (±0.07mm)
0.4mm
10~100 mm/s
FlashPrint
Input:3mf/stl/obj/fpp/bmp/png/jpg/jpeg
File Output: gx/g File
8GB
WIN 8/10
150 W (100-250V, 50/60Hz)
USB stick, WIFI, Ethernet
388x340x405mm
9 kg
Build Speed
Support Formats
Nozzle Diameter
1�2 Reference
KEEPDRY
HANDLE
WITHCARE
FRAGILE
ThePeople's Insurance Company of China
KEEPDRY
HANDLE
WITHCARE
FRAGILE
ThePeople's Insurance Company of China
KEEPDRY
HANDLE
WITHCARE
FRAGILE
10
Chapter 2: Operating
1. Open the box 2. Take out the wrapping paper box on
the top.
3. Be careful! Filament and power ca-
ble are all placed inside the wrapping
paper box
4. Take out the printer from the box.
2�1 Unpacking
Inhaltsverzeichnis
Andere Bresser 3D-Drucker Handbücher
Bresser
Bresser RAPTOR Bedienungsanleitung
Bresser
Bresser XXL Jumbo Bedienungsanleitung
Bresser
Bresser Rex II Bedienungsanleitung
Bresser
Bresser T-REX Bedienungsanleitung
Bresser
Bresser T-REX2 Bedienungsanleitung
Bresser
Bresser Saurus 2010300 Bedienungsanleitung
Bresser
Bresser T-REX2 Bedienungsanleitung
Bresser
Bresser Adventurer3 Bedienungsanleitung
Bresser
Bresser RAPTOR Bedienungsanleitung
Bresser
Bresser T-REX Bedienungsanleitung
