Britax Click & Go Bedienungsanleitung

CLICK & GO

INFANT CARRIER

LOWER FRAME

FOR STRIDER COMPACT STROLLER & E BRAKE STROLLER

TO ACCOMMODATE A BRITAX SAFE-N-SOUND

UNITY INFANT CARRIER WITH INTEGRATED

CLICK & GO ADAPTERS

INSTRUCTION MANUAL

IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE

Series No. ZA8345

WITH INTEGRATED CLICK AND GO RECEIVERS

WARNINGS:

RETAIN FOR FUTURE REFERENCE.

READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE

OF THIS ADAPTER. ALWAYS FOLLOW THE INSTRUCTIONS.

THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS

ESSENTIAL.

• DO NOT USE THE CLICK & GO INFANT CARRIER LOWER FRAME WITH

ANY OTHER MODELS OF STROLLER.

• THE CLICK & GO INFANT CARRIER LOWER FRAME MUST BE CORRECTLY

FITTED AND LOCKED ONTO THE STROLLER FRAME.

• THE CLICK & GO INFANT CARRIER LOWER FRAME CAN ONLY BE USED IN

THE FORWARD FACING POSITION, CONNECTED TO THE REAR OF THE

STROLLER.

• THE CLICK AND GO INFANT CARRIER LOWER FRAME CAN ONLY BE

USED TO ACCOMMODATE A SAFE-N-SOUND UNITY INFANT

CARRIERS WITH INTEGRATED CLICK & GO ADAPTERS.

• THE CLICK AND GO INFANT CARRIER LOWER FRAME CAN ONLY BE

USED ON THE STEELCRAFT STRIDER COMPACT STROLLER SERIES

AND THE BRITAX E BRAKE STROLLER SERIES.

• IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH

THE CLICK AND GO INFANT CARRIER LOWER FRAME.

• THE MAXIMUM WEIGHT OF THE CHILD USING THIS PRODUCT IS NOT TO

EXCEED 12KGS.

WARNINGS

IMPORTANT NOTES

MANUAL HANDLING TECHNIQUES

The SMART lifting technique

This technique can be used to pick up small light loads from low levels.

Size up the Load

• Assess the load (size, shape and weight).

• Assess whether the load needs to be moved;

• Where is it going to be placed” Check that there are no obstructions;

• Assess whether mechanical or human assistance is required.

Move the Load as close to the body as possible

• Aload is heavier to lift or carry if it is not close to the body.

• The whole hand should be used to ensure a firm grip.

Always bend your knees

• Maintain balance.

• Keep feet apart and in a comfortable position.

• Minimise lower back bending.

• Bend knees preferable at as large an angle as possible but not at a right angle -

use a semi squat in preference to a full squat.

Raise the load with your legs

• Achieve the lift smoothly and without jerkiness.

• Maintain the normal curvature of the spine to allow the force of the load to be

distributed evenly from the spine to the pelvis.

Turn your feet in the direction that you want to move the load.

• Avoid unnecessary bending, twisting and reaching.

• Change direction by turning your feet and not your back.

• To set the load down, squat down, keep your head up and let

• Let your legs do the work.

Remember to ‘THINK TALL’ chest lifted, shoulders relaxed, chin tucked in

and head level.

INFANT CARRIER LOWER FRAME

1. INFANT CARRIER LOWER FRAME CONNECTING PINS

2. INFANT CARRIER LOWER FRAME LEG TUBES

3. INFANT CARRIER RELEASE BUTTONS

4. UNITY INFANT CARRIER RECEIVERS

5. INFANT CARRIER LOWER FRAME FOLDING LEVER

6. INFANT CARRIER LOWER FRAME STABILISING BAR

7. STEELCRAFT INFANT CARRIER RECEIVERS

TO USE THE STEELCRAFT RECEIVERS

SUPPLIED WITH THE INFANT CARRIER

LOWER FRAME

A Take one Steelcraft receiver at a time and align the receivers with the stroller

frame mouldings. The receiver extends towards the front of the stroller and the

ribbed section of the mouldings face inwards.

B Insert the receiver into the stroller mouldings. Push down on the receiver until

you hear a ‘click’ which indicates the receiver has locked into the stroller frame

mouldings.

C Pull up on each receiver to check they are locked on.

BRITAX RECOMMEND THE STEELCRAFT RECEIVERS SUPPLIED WITH

THE INFANT CARRIER LOWER FRAME BE ATTACHED TO THE STROLLER

FRAME BEFORE INSTALLING AND USING THE UNITY INFANT CARRIER ON

THE INFANT CARRIER LOWER FRAME.

THE STEELCRAFT RECEIVERS CREATE MORE SPACE BETWEEN THE TOP

SEAT AND THE UNITY INFANT CARRIER IN THE LOWER FRAME.

IMPORTANT NOTE

TO USE THE STEELCRAFT RECEIVERS

SUPPLIED WITH THE INFANT CARRIER

LOWER FRAME

E To remove the receivers, press the button on top of the receiver and pull the

receiver up out of the stroller frame mouldings.

D Install the stroller seat or Steelcraft infant carrier.

To install the stroller seat on the Strider Compact stroller using the

Steelcraft receivers: Please refer to Page 63 of the Strider Compact

Instruction Manual supplied with the stroller.

To install the Steelcraft Infant Carrier on the Strider Compact stroller

using the Steelcraft receivers: Please refer to Page 64 of the Strider

Compact Instruction Manual supplied with the stroller.

To install the stroller seat on the E-Brake stroller using the Steelcraft

receivers: Please refer to Page 97 of the E-Brake Instruction Manual supplied

with the stroller.

To install the Steelcraft Infant Carrier on the E-Brake stroller using

the Steelcraft receivers: Please refer to Page 98 of the E-Brake Instruction

Manual supplied with the stroller.

TO FIT THE INFANT CARRIER LOWER FRAME

A Apply the stroller brake. For easier installation, remove the stroller seat or

infant carrier from the upper section of the stroller frame. Remove the

accessory bag from the stroller, if fitted. Rotate the pivotal handle up to create

more assembly space.

B The infant carrier lower frame connecting pins (1) need to lock into the lower

stroller frame mouldings. Hold the infant carrier lower frame so the leg tubes

(2) are underneath and facing the infant carrier lower frame.

PLEASE REFER TO PAGE 3 FOR LIFTING TECHNIQUES.

• WHEN FITTING THE CLICK & GO INFANT CARRIER LOWER FRAME TO THE

STROLLER, BE AWARE OF THE DANGER OF BEING INJURED BY MOVING

PARTS AND LOCKING DEVICES DURING THE PROCESS.

• THE CLICK & GO INFANT CARRIER LOWER FRAME MUST BE CORRECTLY

FITTED AND LOCKED ONTO THE STROLLER FRAME.

• THE CLICK & GO INFANT CARRIER LOWER FRAME CAN ONLY BE USED IN

THE FORWARD FACING POSITION, CONNECTED TO THE REAR OF THE

STROLLER. KEEPALL HANDS AND LIMBS CLEAR OF THESE PARTS.

IMPORTANT NOTES

CAUTION

TO FIT THE INFANT CARRIER LOWER FRAME

C Then hook the infant carrier lower frame connecting pins (1) into the stroller

frame mouldings, then pull downwards.

D Lower the infant carrier frame and push down to lock the leg tubes (2) into the

lower stroller frame mouldings. Repeat Step D if the frame doesn’t lock into

place.

DCAUTION

TO FIT THE INFANT CARRIER LOWER FRAME

E Pull up on the infant carrier lower frame to make sure it is locked onto the

stroller frame.

F Lift the folding lever (5) on the infant carrier lower frame and raise the frame so

it slides down the stroller frame and engages into the second lock on the

stroller. When locked, the lower adapter frame is locked slightly above

horizontal.

TO INSTALL THE UNITY INFANT CARRIER

INTO THE INFANT CARRIER LOWER FRAME

A Lift the infant carrier above the infant carrier lower frame and locate the infant

carrier adapters over the receivers (4) on the infant carrier lower frame and

push down until it has locked into the receivers. Pull up on the infant carrier to

confirm it has locked into place.

PLEASE REFER TO PAGE 3 FOR LIFTING TECHNIQUES.

• THESE INSTRUCTIONSARE FOR INSTALLING THE BRITAX SAFE-N-SOUND

UNITY INFANT CARRIER INTO THE CLICK & GO INFANT CARRIER LOWER

FRAME ONLY.

FOR INSTALLING THE INFANT CARRIER IN THE CAR PLEASE FOLLOW

THE INSTRUCTION BOOK INCLUDED WITH THE INFANT CARRIER.

• TO SECURE YOUR CHILD IN THE INFANT CARRIER PLEASE FOLLOW THE

INSTRUCTION BOOK INCLUDED WITH THE INFANT CARRIER.

• FOR EASIER INSTALLATION, REMOVE THE STROLLER SEAT OR INFANT

CARRIER FROM THE UPPER SECTION OF THE STROLLER FRAME AND

ROTATE THE STROLLER PIVOTAL HANDLE TO THE MOST UPRIGHT

POSITION.

IMPORTANT NOTES

Andere Handbücher für Click & Go

Inhaltsverzeichnis

Andere Britax Babytrage Handbücher

Britax

Britax Go Prambody Bedienungsanleitung

Britax

Britax ECLIPSE none Bedienungsanleitung

Britax

Britax BABY SAFETY CAPSULE Bedienungsanleitung

Britax

Britax Baby Carrier Bedienungsanleitung

Britax

Britax UNITY Bedienungsanleitung

Britax

Britax Baby Carrier Bedienungsanleitung

Britax

Britax BABY-SAFE Bedienungsanleitung

Britax

Britax BRITAX GO Bedienungsanleitung

Britax

Britax GO NEXT Bedienungsanleitung

Britax

Britax Strider Compact Bedienungsanleitung

Britax

Britax SERENITY Bedienungsanleitung

Britax

Britax BABY SAFETY CAPSULE Bedienungsanleitung

Beliebte Babytrage Handbücher anderer Marken

onya baby

onya baby BOOSTER Bedienungsanleitung

Joie

Joie C2104 Bedienungsanleitung

Chicco

Chicco MARSUPIO Go Bedienungsanleitung

Edwards & Co

Edwards & Co AVERY FA0062 Bedienungsanleitung

Quinny

Quinny 1473 Bedienungsanleitung

Infantino

Infantino Infinity Bedienungsanleitung

BabyBjorn

BabyBjorn BaByBjörn Baby Carrier Active Bedienungsanleitung

BabyBjorn

BabyBjorn BaByBjörn Baby Carrier Origina Konfigurationshandbuch

Caboo

Caboo Plus Organic Bedienungsanleitung

BabyBjorn

BabyBjorn Miracle Bedienungsanleitung

Joie

Joie Aire twin Bedienungsanleitung

BESAFE

BESAFE Haven Bedienungsanleitung

WOMPAT

WOMPAT ILO Bedienungsanleitung

Bellelli

Bellelli FRECCIA Bedienungsanleitung

Graco

Graco ISPC090BB Bedienungsanleitung

TIGEX

TIGEX 80834154 Bedienungsanleitung

Voksi

Voksi Urban Bedienungsanleitung

BabyBjorn

BabyBjorn Miracle Bedienungsanleitung