Briteq LED MEGA BEAM Bedienungsanleitung

USER

MANUAL

Ver 1,0

LED

BEAM

MEGA

3.6--DMX512 SETTINGS....................................................................11.

PART4 USINGA DMX512CONTROLLER....................................14.

4.1--BASIC ADDRESSING.................................................................14.

4.2--CHANNELASSIGNMENT............................................................14.

4.3--BASIC INSTRUCTIONS FORDMX512 OPERATION......................19.

PART3 DISPLAY PANEL OPERATION.........................................8.

3.1--BASIC..........................................................................................8.

3.2--MENU..........................................................................................9.

3.4--ACTIVATING AUTO PROGRAMS.................................................10.

3.7--PERSONALITY...........................................................................11.

3.8--ID ADDRESS..............................................................................11.

3.10--SPECIAL SETTINGS.................................................................12.

3.13--A CTIVATETHE PASSWORD ....................................................13.

3.9--EDITING CUSTOMPROGRAMS ................................................ 12.

3.12--WHITES BALANCE.................................................................. 13.

PART1 PRODUCT(GENERAL)....................................................1.

1.1--PRODUCT INTRODUCTION.........................................................1.

1.2--PRODUCT FEATURES.................................................................1.

1.3--TECHNICAL SPECIFICATIONS.....................................................2.

1.4--PHOTOMETRICDATA..................................................................3.

1.5--SAFETY WARNING......................................................................4.

PART2 INSTALLATION...............................................................5.

2.1--MOUNTING...................................................................................5.

2.3--SETTING UPWITHA DMX512 CONTROLLER.................................6.

2.3-1--DMX512ADDRESSING WITHOUTID ADDRESSING......................................6.

2.3-2--DMX512 ADDRESSING WITHID ADDRESS..................................................6.

2.2--POWER CONNECTION..................................................................5.

3.3--EDIT STATICCOLOUR............................................................... 10.

PART5 APPENDIX......................................................................20.

5.1--TROUBLE SHOOTING...............................................................20.

5.2--MAINTENANCE.........................................................................21.

3.5--RUN MODE................................................................................10.

3.11--WHITES SETTING....................................................................13.

ABLE OF CONTENTS

1.1 PRODUCTINTRODUCTION

This product is designed for indoor or outdoor use. Suitable applications include wash or

effect lighting for architectural, stage, theatre or road show applications. Direct input of

DMX512 signal allowsthe units tobe controlled fromany DMX512 controller. Thisproduct

can be operatedas a singleunit or inmultiple units forlarge applications.

1.2 PRODUCTFEATURES

LED FIXTURE

1 PRODUCT(GENERAL) 1

* IP67protection rating

* RGBWDimmer 0-100%

* Strobe

* Built-in automaticprograms

* Upload custom parametersto slavefixtures

* LEDdisplay

* Display control'lock-out'

* DirectDMX512 input

* Independent IDaddress

* Differentwhite colorssetting

* 'Over-heat'protection

2008.8.13

1PRODUCT (GENERAL)

1.3 TECHNICALSPECIFICATIONS

LED MODULE

Dimensions

LED MODULE:

Voltage

Rated Power

IP67 protection rating

48pcs (12 xRED / 12x GREEN /12 x BLUE/12 x WHITE)

Weight

LED/Unit

Output/LED

Cooling

Direct air convection

305 x 276x 230mm

8.5Kg

100~250V...50/60Hz

180W

1 PRODUCT(GENERAL) 2

Environment Temperature -20 ~40

2008.8.13

1.4 PHOTOMETRICDATA

PHOTOMETRICDATA

1 PRODUCT(GENERAL) 32008.8.13

RED

33931 1010 482 274 186 LUX

GREEN

36130 1700 776 450 304 LUX

BLUE

31360 256 120 68 46 LUX

WHITE

246810Distance(m)

4613 1204 552 326 230 LUX

RGB

246810Distance(m)

11340 2885 1285 765 530 LUX

246810Distance(m)

16300 4000 1900 1122 752 LUX

RGB+WHITE

246810Distance(m)

1.5 SAFETYWARNING

IMPORTANT

ALWAYSREAD THEUSER MANUALBEFORE OPERATION.

PLEASE CONFIRMTHATTHE POWERSUPPLYSTATED ONTHE

PRODUCT ISTHE SAMEAS THEMAINS POWERSUPPLYIN YOUR

AREA.

This productmust beinstalled bya qualifiedprofessional.

Always operatethe equipmentas describedin theuser manual.

A minimum distance of 0.5m must be maintained between the equipment and

combustible surface.

The productmust alwaysbe placedin awell ventilatedarea.

Always makesure thatthe equipmentis installedsecurely.

DO NOT stand close to the equipment and stare directly into the LED light

source.

Always disconnectthe powersupply beforeattempting andmaintenance.

Always make sure that the supporting structure is solid and can support the

combined weight ofthe products.

The earthwire mustalways beconnected tothe ground.

Do not touchthe power cablesif your handsare wet.

ATTENTION

This product leftthe place ofmanufacture in perfectcondition. In orderto

maintain thiscondition andfor safeoperation, theuser mustalways followthe

instructions andsafety warningsdescribed inthis usermanual.

Avoid shakingor strong impactsto any partof the equipment.

Make sure thatall parts ofthe equipment arekept clean andfree of dust.

Always makesure thatthe powerconnections areconnected correctand

secure.

If thereis anymalfunction ofthe equipment,contact yourdistributor

immediately.

When transferringthe product,it isadvisable touse theoriginal packagingin

which the productleft thefactory.

Shields, lenses orultraviolet screens shallbe changed ifthey have become

damaged tosuch anextent thattheir effectivenessis impaired.

The lamp(LED) shallbe changedif ithas becomedamaged orthermally

deformed.

1 PRODUCT(GENERAL) 42008.8.13

2.1 MOUNTING

HANGING

UPRIGHT

The fixture can be mounted in an upright or

sitting position usingthe supporting brackets.

The fixturecan be mounted in a hangingposition

using the supporting bracket. The bracket

should be secured to the mounting truss or

structure using a standard mounting clamp.

Please note that when hanging theunit a safety

cable shouldalso beused.

@ 220V:10unitsmay beconnected inseries

@120V: 5units maybe connectedin series

The LED MODULEcan be mountedat any angleand in any

position. It ispossible to furtheradjust the angleof the LED

MODULE using thetwo adjustment knobslocated on theside of

the fixture.

2.2 POWER CONNECTIONS

2 INSTALLATION

Note:

1. As thisfixture's DMXsignal cableconnection isParallel connection,so ifover 32 units to be

connected, thena DMXsignal amplifieris needed.

2. If the signal cable is over 60m between the DMX512 controller and fixture or beween two

fixtures, thena DMXsignal amplifieris neededas well.

2008.8.13

2INSTALLATION

2.3 SETTING UPWITHADMX512

CONTROLLER

2.3-1 DMX512ADDRESSINGWITHOUT IDADDRESSING

(STAGMODE)

The figureabove showsa simpleDMX512

layout with thestarting address ofthe first

unit setat 1,with thesecond setat 12and

so on... (Note thatwhen usedin thisway,

the CH11 IDfunction must be inactive (CH11=0))

DMX512

CONTROLLER

Connect the DMX512controller to theunits in series.

Each unithas 11 DMXchannels sothe DMXAddressesshould increaseby incrementsof

11(e.g. 1,12,23,34...)

The ID addresshas not beenset so therefore when usingthe controller CH11 must

be inactive (CH11=0).

It isalso possibleto deactivateID addressselecting ID OFF from the Settings menu.

on the fixture

Each DMXAddressmay beused asmany timesas required.

Any DMXaddress inthe rangefrom 001to 512may beused.

2.3-2 DMX512ADDRESSINGWITH IDADDRESS (STAGMODE)

Connect theDMX512 controllerto theunits inseries

Each unithas 11 DMXchannels sothe DMXAddressesshould increaseby incrementsof

11(e.g. 1,12,23,34...)

Each DMXAddressmay beused asmany timesas required.

Any DMXaddress inthe rangefrom 001to 512may beused.

Each DMX addressmay carry upto 66 separateID addresses.

ID should beset inthe menuon eachunit inascending values

(i.e. 1,2,3...)

ID On should beset inthe Settings menu on eachunit.

ID addressesare accessiblefrom Ch9on theDMX512 controller.

Example:

2 INSTALLATION

............

DMX Addr.1 DMX Addr.12 DMX Addr.23

2008.8.13

DMX512

CONTROLLER

Example:

The figureabove showsa simpleDMX layout

which has usedthree units ateach DMX address.

The three unitshave differentID addresses which

allows theuser tocollectively controlthe whole

group ofunits atthat DMXaddress bysetting

CH11to 0,or tocontrol eachunit independentlyby

first selectingthe DMXaddress andthen byusing

CH11to locate the target ID address.

2 INSTALLATION

............

DMX Addr.1

ID Addr.1 DMX Addr.1

ID Addr.2 DMX Addr.1

ID Addr.3 DMX Addr.12

ID Addr.1 DMX Addr.12

ID Addr.2 DMX Addr.12

ID Addr.3

2008.8.13

3.1 BASIC

The LED fixtureis mounted witha LCD displayand 4 controlbuttons.

enter thecurrently selectedmenu orconfirm thecurrent functionvalue

scroll 'UP' through the menulist or increase the valueof the current function

scroll'DOWN' throughthemenu list ordecrease thevalue ofthecurrent function

scroll throughthe mainmenu orreturn tothe mainmenu

3 DISPLAY PANEL OPERATION 2008.8.13

3DISPLAY PANEL OPERATION

ENTER UP DOWN

ENTER

Inhaltsverzeichnis

Andere Briteq Beleuchtungsausrüstung Handbücher

Briteq

Briteq LED UV-GUN 60W Bedienungsanleitung

Briteq

Briteq BT-NODE28 Bedienungsanleitung

Briteq

Briteq BT-CHROMA 800 Bedienungsanleitung

Briteq

Briteq BT-THEATRE 150EZ Bedienungsanleitung

Briteq

Briteq Spectra 3D Laser Bedienungsanleitung

Briteq

Briteq STAGE COLOR 48 Bedienungsanleitung

Briteq

Briteq LED Blaster 108 Bedienungsanleitung

Briteq

Briteq Multipar Bedienungsanleitung

Briteq

Briteq BT-VENUELITE 4 Bedienungsanleitung

Briteq

Briteq LED MINI PAR - V2.1 Bedienungsanleitung

Briteq

Briteq LD-POWER240 Bedienungsanleitung

Briteq

Briteq BEAMSPOT1-TRIAC NW Bedienungsanleitung

Briteq

Briteq BTX-700SW Bedienungsanleitung

Briteq

Briteq MICRO BEAMER RGBW Bedienungsanleitung

Briteq

Briteq POWERMATRIX5x5-RGB Bedienungsanleitung

Briteq

Briteq BT-36LI Bedienungsanleitung

Briteq

Briteq BTX 300 Beam Bedienungsanleitung

Briteq

Briteq BT-LASER2000 RGB Bedienungsanleitung

Briteq

Briteq BTX 5R BEAM Bedienungsanleitung

Briteq

Briteq STAGE PAINTER 12 Bedienungsanleitung

Briteq

Briteq LDP COBWASH Bedienungsanleitung

Briteq

Briteq Club Laser 7 Bedienungsanleitung

Briteq

Briteq MIINI COLOR 7 TC - V1.1 Bedienungsanleitung

Briteq

Briteq BT-BEAM70 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung