Function buttons
TIMER ON Button
TIMER OFF Button
8
Push this button to decrease the temperature
set point or to decrease the Hour during Timer
setting.
UP Button ( + )
Push this button to increase the temperature
set point or to increase the Hour during Timer
setting.
DOWN Button ( - )
9
12
13
10
11
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
FAN SPEED Button
SILENCE Button ( )RG36F/BG(C)EF models
SILENCE / FP Button ( )RG36F1/BG(C)EF models
Press this button to initiate the auto-on time
sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays “10H”, each
press will increase the auto-timed setting in
60 minutes increments. To cancel the
auto-timed program, simply adjust the
auto-on time to 0:0.
Press this button to initiate the auto-off time
sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays “10H”, each
press will increase the auto-timed setting in
60 minutes increments. To cancel the
auto-timed program, simply adjust the
auto-off time to 0:0
1
1
2
2
4
4
5
5
3
3
9
9
10
10
8
8
6
6
7
7
11
11
12
12
13
13
14
14
15
15
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
FP
TIMER
ON
TIMER
OFF
LOCK RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
ON/OFF
ON/OFF
SWING
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
TIMER
ON
TIMER
OFF
LOCK RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
SWING
Press this button to initiate SILENCE function.
When the SILENCE function is activated, the
compressor will operate at low frequency and
the indoor fan will be set to low speed. This will
reduce the noise levels to their lowest and create
a quiet and comfortable room for you. Due to
low frequency operation, the unit may be unable
to cool or heat the room effectively.
14
15
LOCK Button
When you press the recessed LOCK button,
all current settings are locked in and the
remote control does not accept any other
commands except that of the LOCK button.
Press again to cancel the LOCK mode.
LED / FOLLOW ME Button
Disable / Activate indoor unit LED. If
pressed and held for more than 2 seconds, the
FOLLOW ME function will be activated. Push
and hold for more than 2 seconds again to disable.
Model B:RG36F1/BG(C)EF
7
When you press the recessed RESET button,
all current settings are cancelled and the
control will return to the initial settings.
RESET Button:
Activate / Disable SILENCE function.
When the Silence function is activated, the
compressor will operate at low frequency and
the indoor fan will be set to low speed. This will
reduce the noise levels to their lowest and create
a quiet and comfortable room for you. Due to
low frequency operation, the unit may be unable
to cool or heat the room effectively.
During heating operation (only when the
setting mode is HEAT), if you press this button
for more than 2 seconds, the FP function is
activated. The unit will operate at high fan
speed with the temperature automatically
set to 8 The display window of the indoor unit
OC.
will display “FP”. For units without a display
area, the Defrost indicator light will be illuminated
for 2 seconds, and then turn off for 2 seconds in
turn. Pressing the ON / OFF, SLEEP, FP, MODE,
FAN SPEED, UP, or DOWN buttons while in
operation will cancel the “FP” function.
