Bromic Heating Eclipse Master Remote Bedienungsanleitung
Bromic.com
Troubleshooting Guide
Programming the Eclipse Master
Remote for use with the Eclipse Dimmer
Controller & Eclipse Portable Heater
Bromic Eclipse Master Remote
• US - BH3623002-1
• AU - 2620662-1
• EU - BH4623003-1
Bromic Eclipse Dimmer Remote
• US - BH3230007-1
• AU - 2620637-1
• EU - BH3230017-1
Bromic Eclipse Portable
• US - BH0820001-1
• AU - 2620611-1
• EU - BH0820011
The Master Remote features 6 zones as indicated by the red led lights at the top of the remote. Each zone
can be programmed to control a single dimmer or multiple dimmers.
You will need to be in close proximity to the dimmer control and/or portable unit to be able to hear the
audible beeps of the controls during the programming process. You do not need to open the units them-
selves. You will need the individual standard remotes for this process along with the new master remote.
The original individual remotes can be stored to be used as back up. We recommend labeling the remotes
to the corresponding dimmers for future refence.
REQUIREMENTS
Bromic.com Bromic.com
3. Paring the Heater Functions
Locate the P3 button on the back of the standard remote.
Using a paper clip, press the P3 button. You will hear a
continuous beep.
Turn the remote over and press the top heat button (100%).
Press the corresponding top heat button (100%) on the
master remote. You will hear an intermittent beep.
The heat functions are now paired.
The programming has been completed for this dimmer.
Below are the basic steps for programming an Eclipse Master Remote
for use with the Eclipse Dimmer Controller and Eclipse Portable
outdoor heater.
1. To begin you will need to confirm the compatibility.
2. Select a zone on the 42-channel remote: Zone 1-6
Turn the Eclipse Standard Dimmer Remote and the Eclipse Master Remote over and confirm they have the same
frequency (916 each) listed on the back label.
Press the left or right button under the red led lights to select the desired zone. The buttons will move the
selection left or right.
Once selected the LED will go out but the zone will be remembered during the programming process.
You can program multiple remotes to a single zone or change zones for each remote. It is recommended that you
confirm the desired zone before each remote is programming to ensure the remotes are zoned as planned.
Bromic.com Bromic.com
If this does not resolve the issue, you will need to schedule a troubleshooting call with Bromic Tech Support.
When contacting our Tech Team we request you submit model numbers of the heaters and controls, photos of the
installed products and installation wiring along with proof of purchase to validate any warranty.
Please remember to request service calls 48 hours in advance to ensure availability.
North America - Technical Support
(800) 301-1293
www.bromic.com
Austrailia - Technical Support
1300 276 642
www.bromic.com.au
Europe - Technical Support
+31 737041029
www.bromic.co.uk
4. Paring the Light Functions
Locate the P3 button on the back of the standard remote.
Using a paper clip, press the P3 button. You will hear a
continuous beep.
Turn the remote over and press the top light button (100%).
Press the corresponding top light button (100%) on the
master remote. You will hear an intermittent beep.
The light functions are now paired.
The programming has been completed for this dimmer.
5. You can now add additional dimmers to the selected zone to create a group of
dimmers or change the zone for individual dimmer control.
Repeat steps 3 & 4 listed above for each standard remote to be paired to the master remote.
We recommend labeling the standard remotes to match the dimmers and zones for future reference.
Dieses Handbuch passt für folgende Modelle
11
Andere Bromic Heating Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
